Allen & Heath PL-10 user manual

Summary of the content on the page No. 1

PL-10 Rotary Encoder Remote AP5708

User Guide


Introduction The PL-10 adds to the extensive range of remote control devices available for the iDR-4/8 audio
mix processor and iLive mixing systems. It offers an alternative to the PL-6 fader controller with the advantage that
user settings can be stored and recalled without the need to physically move the controls to the new settings.
The PL-10 is part of the Allen & Heath PL Series of wall plate

Summary of the content on the page No. 2

Number of devices The maximum number of PL-Anet connections Underside RJ45 ports PL devices that can be connected depends on their are provided for connecting to PL-Anet. These are type, cable lengths and PL-Anet Bus Speed. Up to 18x recessed so that the cables can be hidden from view. PL-10 devices may be connected in an iDR system The IN port connects to the previous unit in the chain. with the half speed PL-A-net Bus setting. Fewer The OUT port connects to the next unit, or end of