Summary of the content on the page No. 1
CLS-EXP-DIMFLV
Specifications
Functional Summary
CLS-EXP-DIMFLV Specifications
The CLS-EXP-DIMFLV enables the expansion of the
®
Crestron iLux™ Integrated Lighting System and other
SPECIFICATION DETAILS
Crestron lighting dimmers to support 120 - 277 Volt loads
Load Ratings
up to 16 Amps. It allows any output channel of a
Output Channels 1
compatible dimmer or switch to control a fully loaded
Load Ratings:
1
circuit of 0-10 VDC fluorescent ballasts , non-dimmed Lamp 16 Amps @
Summary of the content on the page No. 2
iLux™ Expansion Module Crestron CLS-EXP-DIMFLV CLS-EXP-DIMFLV Specifications (Continued) SPECIFICATION DETAILS Compatible Control Devices CLS(I)-C6 Series iLux Integrated Lighting System CLW Series Wall Dimmers and Switches CLX(I)-1DIM4 Four Channel Dimmer Module, Single Feed CLX-1DIM8 Eight Channel Dimmer Module, Single Feed CLX(I)-2DIM2 Two Channel Dimmer Module, Two Feeds CLX(I)-2DIM8 Eight Channel Dimmer Module DIN-1DIMU4 Crestron Green Light™ DIN Rail Universal D
Summary of the content on the page No. 3
Crestron CLS-EXP-DIMFLV iLux™ Expansion Module Application The following diagram shows several CLS-EXP-DIMFLV modules in a typical application. CLS-EXP-DIMFLV modules in a lighting application Installation Guide – DOC. 6680A iLux™ Expansion Module: CLS-EXP-DIMFLV • 3
Summary of the content on the page No. 4
iLux™ Expansion Module Crestron CLS-EXP-DIMFLV Connectors & Indicators # CONNECTORS & DESCRIPTION Physical Description INDICATORS This section provides information on the connections and 1 LOAD STATE (1) Red LED behind front panel, INDICATOR illuminates when load output is indicators available on the CLS-EXP-DIMFLV. on 2 POWER (1) Green LED behind front CLS-EXP-DIMFLV Overall Dimensions INDICATOR panel, indicates power is 5.79 in 3.18 in (14.71 cm) (8.08 cm) applied to the HOT termi
Summary of the content on the page No. 5
Crestron CLS-EXP-DIMFLV iLux™ Expansion Module Hardware Hookup Setup WARNING: RISK OF SERIOUS PERSONAL INJURY. Turn off power at the circuit breaker(s) prior to installation. Installing with power on can result in serious Important Notes personal injury and damage to the device. Read before installation. 1. Use a #2 Philips screwdriver to remove the cover • Codes: Install in accordance with all local and screws as shown in the following diagram and national electrical codes. remov
Summary of the content on the page No. 6
iLux™ Expansion Module Crestron CLS-EXP-DIMFLV CLS-EXP-DIMFLV Wiring for 0-10V Dimming Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CLS-EXP-DIMFLV Wiring for Switching Application CLS-EXP-DIMFLV Troubleshooting TROUBLE POSSIBLE CORRECTIVE CAUSE(S) ACTION Load does not Controlling Make sure the turn on. dimmer or switch co
Summary of the content on the page No. 7
Crestron CLS-EXP-DIMFLV iLux™ Expansion Module Return and Warranty Policies Further Inquiries If you cannot locate specific information or have Merchandise Returns / Repair Service questions after reviewing this guide, please take 1. No merchandise may be returned for credit, exchange or service advantage of Crestron's award winning customer service without prior authorization from CRESTRON. To obtain team by calling the Crestron corporate headquarters at warranty service for CRESTRO
Summary of the content on the page No. 8
iLux™ Expansion Module Crestron CLS-EXP-DIMFLV This page is intentionally left blank. 8 • iLux™ Expansion Module: CLS-EXP-DIMFLV Installation Guide – DOC. 6680A
