Harbor Freight Tools 67032 user manual

Summary of the content on the page No. 1

18V cordless Worklight
67032
set up and operating instructions
note: Batter Y pack (67029) sold separatel Y
®
distributed exclusively by harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sa Ve this manual.
© ®
Copyright 2009 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein m

Summary of the content on the page No. 2

notice is used to sa Ve this manual address practices Keep this manual for the safety warn- not related to personal injury. ings and precautions, assembly, operat- caution, without ing, inspection, maintenance and cleaning the safety alert procedures. Write the product’s serial symbol, is used to address number in the back of the manual near the practices not related to assembly diagram (or month and year of personal injury. purchase if product has no number). Keep this manual and

Summary of the content on the page No. 3

b. prevent unintentional starting. d. under abusive conditions, liquid ensure the switch is in the off- may be ejected from the battery; position before connecting to bat- avoid contact. if contact acciden- tery pack, picking up or carrying tally occurs, flush with water. If the tool. liquid contacts eyes, additionally seek medical help. Liquid ejected 4. Flashlight use and care from the battery may cause irritation a. do not use the Flashlight if the or burns. switch does not turn it on

Summary of the content on the page No. 4

flammable, but they also obstruct symbology vents under the charger. Place the charger on a stable, solid, Double Insulated nonflammable surface (such as a stable metal workbench or concrete Canadian Standards Association floor) at least 1 foot away from all flammable objects, such as drapes or Underwriters Laboratories, Inc. walls. Keep a fire extinguisher and a smoke detector in the area. Fre- quently monitor the charger and Volts Alternating Current V~ battery while charging. Amper

Summary of the content on the page No. 5

speciFications operating instructions Battery Type 18V NiCd - SKU 67029 t ool set up Charger SKU 67031 t o preVent Bulb 10W incandescent, XPR-18 serious injur Y Accessories Spare Bulb in Lamp Head Housing From accidental operation: t urn the power switch of the unpacking tool to its “oFF” position and disconnect the tool from its When unpacking, make sure that the Battery pack before item is intact and undamaged. If any parts performing any inspection, are missing or broken, please

Summary of the content on the page No. 6

Lamp Head Housing (7) maintenance and Spare Bulb (12) ser Vicing Reflector (13) Procedures not specifically Lens (14) explained in this manual Lens Retainer (15) must be performed only by a qualified technician. t o preVent serious injur Y Spring (11) From accidental Bulb (12) operation: Figure 2 t urn the power switch of the 3. To change the bulb: tool to its “oFF” position and disconnect the tool from its a. Unthread the Lens Retainer (15) battery pack before counterclockwise an

Summary of the content on the page No. 7

parts & assemBl Y diagram part description Qty part description Qty 1 Strap 1 11 Spring 1 2 Power Switch 1 12 Bulb, XPR-18 2 3 Switch 1 13 Reflector 1 4 Housing 1 14 Lens 1 5 Tapping Screw ST2.9 x 16 2 15 Lens Retainer 1 6 Rotation Limiting Plate 1 16 Contact Plate 1 7 Lamp Head Housing 1 17 Contact Strip 2 8 Clamp Plate 1 19 Tapping Screw ST2.9 x16 5 9 Wiring Board 1 20 Housing 1 10 Positive Spring 1 record product’s serial number here: note: If product has no serial number, record month and y

Summary of the content on the page No. 8

please read the FolloWing careFull Y THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/ OR DISTRIBUTOR EXPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACE