Summary of the content on the page No. 1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Limited Consumer Warranty For a period of one calendar year from the date of purchase of this device, Directed Electronics, Inc. promises to the ORIGINAL PURCHASER to repair or replace (with a comparable reconditioned model), free of cost, any electronic control module which proves to be defective in workmanship or material under normal use, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY INSTALLE
Summary of the content on the page No. 4
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUD- ED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COM- MERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO THE EXCLU- SION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WAR- RANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OF PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER OR ANY ENTITIES CONNECTED THEREW
Summary of the content on the page No. 5
Table of Contents Limited Lifetime Consumer Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Standard Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What is Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Maintenance. . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
Standard Configuration controls the Lock/Panic ON/Panic OFF function. controls the Disarm function. controls Silent Mode™and an Auxiliary Output. 2 2004 Directed Electronics, Inc. ©
Summary of the content on the page No. 7
What is Included ■ The control module ■ An receiver/antenna ■ Two four-button transmitters ■ The status LED indicator light ® ■ A push-button Valet switch ■ Your warranty registration ■ A shut-down toggle switch Important Information Congratulations on the purchase of your remote start keyless entry system. Due to the complexity of this system, it must be installed by an authorized dealer only. Installation of this product by any- one other than an authorized dealer voids the warranty. All dea
Summary of the content on the page No. 8
System Maintenance The system requires no specific maintenance. Your remote is powered by a small, lightweight 3-volt lithium battery that will last approx- imately one year under normal use. When the battery begins to weaken, operating range will be reduced and the LED on the remote will dim. Your Warranty Your warranty registration must be completely filled out and returned within 10 days of purchase. Your product warranty will not be validated if your warranty registration is not returned. M
Summary of the content on the page No. 9
Transmitter Functions The receiver uses a computer-based learn routine to learn the transmitter buttons. This makes it possible to assign any specific transmitter button, or combination of buttons, to any receiver function. The transmitter initially comes programmed with the Standard Configuration, but may also be customized by an autho- rized dealer. The transmitter buttons indicated in all of the instructions in this manual correspond to a Standard Configuration transmitter. Standard Configura
Summary of the content on the page No. 10
Using Your System Arming Pressing for one second arms the system by activating the starter kill. The horn will honk and the parking lights (optional) will flash once to confirm arming of the system. While the system ® is armed, the status LED will flash once per second. The Failsafe Starter Kill will also prevent the vehicle’s starter from cranking. ® The system can also be programmed to arm the optional Failsafe Starter Kill automatically (called Passive Mode). If the system has ® been prog
Summary of the content on the page No. 11
Disarming Pressing for one second disarms the system. The horn will honk twice and the parking lights (optional) will flash twice to confirm ® disarming of the system. The optional Failsafe Starter Kill will be deactivated. The status LED will turn off, unless the system is pro- grammed for Passive Mode. In Passive Mode, the status LED will flash rapidly when the system is disarmed. This indicates that the system will re-engage the starter kill in 30 seconds unless the igni- tion is turned on. D
Summary of the content on the page No. 12
® Valet Mode You can prevent your system from automatically activating the ® ® Failsafe Starter Kill by using Valet Mode. This is very useful when ® washing the vehicle or having it serviced. In Valet Mode, the starter kill cannot be activated, even with the transmitter, but all convenience functions will continue to work normally. ® To enter or exit Valet Mode: 1. Turn the ignition on. 2. Turn the ignition off. ® 3. Press and release the Valet DRW-35 switch within 10 seconds. ® The
Summary of the content on the page No. 13
Rapid Resume Logic This Directed Electronics system will store its current state to non- volatile memory. If power is lost and then reconnected the system will recall the stored state from memory. This means if the unit is ® in Valet Mode and the battery is disconnected for any reason, such as servicing the car, when the battery is reconnected the unit will still be in Valet Mode. This applies to all states of the system including arm, disarm, and Valet Mode. Programming Options Programming op
Summary of the content on the page No. 14
Glossary of Terms Control Unit: The “brain” of your system. Usually hidden under- neath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all system functions. ® Failsafe Starter Kill: An automatic switch controlled by your sys- tem which prevents the vehicle’s starter from cranking whenever the system is armed. The vehicle is never prevented from cranking ® when the system is disarmed, in Valet Mode, or if the starter kill switch itself fails.
Summary of the content on the page No. 15
Convenience Expansions Listed below are some of the many expansion options available for use with your system. Some options may require additional parts and/or labor. Please consult with your dealer for a complete list of options available for use with this system. Domelight Supervision: The domelight will illuminate for 30 seconds each time the system is disarmed using the transmitter. This is useful for seeing inside the vehicle at night prior to entering it. 11 2004 Directed Electronics, In
Summary of the content on the page No. 16
12 2004 Directed Electronics, Inc. ©
Summary of the content on the page No. 17
Notes 13 2004 Directed Electronics, Inc. ©
Summary of the content on the page No. 18
14 2004 Directed Electronics, Inc. ©
Summary of the content on the page No. 19
✂ QUICK REFERENCE GUIDE: To lock using your remote ■ To arm the system press for one second. The doors will lock (if con- ® nected). The LED will begin to flash. The Failsafe Starter Kill will pre- vent the vehicle’s starter from cranking if it has been installed. The ve- hicle’s horn (if connected) will honk and the parking lights will flash once to confirm arming of the system. To unlock using your remote ■ To disarm the system press for one second. The doors will unlock (if ® connected). The
Summary of the content on the page No. 20
The company behind this system is Directed Electronics, Inc. Since its inception, Directed Electronics, Inc. has had one purpose, to provide con- sumers with the finest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology, Directed Electronics, Inc. is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world
