SkyLink MA-103 user manual

Summary of the content on the page No. 1

Model MA-103
Wireless Alarm System
1. INTRODUCTION - INTRODUCTION
Congratulations on purchasing the Skylink Wireless Alarm System MA Series. The
MA Series provide you with powerful features yet easy to use. You will find the installation In this package, you will find the following items:
to be simple and be able to get the system up and running with little effort.
Sensors* (optional)
MA Series Wireless Alarm System consists of the following major features:
- Audio and Visual Alert when the

Summary of the content on the page No. 2

2. SET UP - TEST MODE To set the Control Panel in Test Mode: Start with removing Start with removing all power 1 1 Step 1: Remove the adapter and all batteries from the Control Panel. from Control Panel. 2 Hold “Mute”, don’t release Step 2: Press and hold the "Mute" button and plug the AC adapter back into the Control until step 4. Panel. All LED indicators will be ON, you may release the "Mute" button. Control Panel is now in Test Mode, and it will respond to all sen

Summary of the content on the page No. 3

4. ALARM - ARM HOME (CONT) Example: If you would like to arm the system at night, where all the doors / windows are not expected to be opened. You can arm the system in Home mode and even walking within the house (activates Motion Sensor), it will not activate the alarm, unless the monitored doors or windows are opened. To arm the Control Panel in Home mode: 1 Enter Password Step 1: Enter the 4-digit Password Step 2: Press and hold the “Arm” button for 3 seconds. The Arm LED will be ON steadi

Summary of the content on the page No. 4

5. SYSTEM STATUS - EXTERNAL ALARM DEVICES You can add an external alarm devices to the Control Panel so these devices can be activated when the alarm is triggered. These devices include: External Alarm Siren Model AA-103 Emergency Dialer Model AD-103 Control Module Model IS-001 To program the Control Panel to an external alarm device: Step 1: Put the external alarm device into programming mode (refer to the instruction manual of the external alarm device) Step 2: Press and hold the “Mute” b