Summary of the content on the page No. 1
DMP-CD100
MP3 CD Player
User’s Manual
Summary of the content on the page No. 2
CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures Warnung! Dies ist in Produkt der Klasse B. Im Wohnbereich kann dieses Produkt Funkstoerungen verursachen. In diesem Fall kann vom Benutzer verlangt werden, angemessene Massnahmen zu ergreifen. Advertencia de Marca de la CE Este es un producto de Clase B. En un entorno doméstico, puede causar interferencias de r
Summary of the content on the page No. 3
SAFETY CERTIFICATION This compact disc player is made and tested to meet safety standards of the FCC, requirements and compliance with safety performance of the U.S. Department of Health and Human Services, and also with FDA Radiation Performance Standards 21 CFR Subchapter J. SAFETY PRECAUTIONS • Do not take the DMP-CD100 apart. The laser beam used in the DMP-CD100 could harm your eyes. • Do not insert pins, etc., inside the DMP-CD100. This unit is equipped with a safety device which a
Summary of the content on the page No. 4
LIMITED WARRANTY D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product only to the person or entity who originally purchased the product from D-Link or its authorized reseller or distributor. Limited Hardware Warranty: D-Link warrants that the hardware portion of the D-Link products described below (“Hardware”) will be free from material defects in workmanship and materials from the date of original retail purchase of the Hardware, for the period set forth below a
Summary of the content on the page No. 5
writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. The Warranty Period shall extend for an additional ninety (90) days after any replacement Software is delivered. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee
Summary of the content on the page No. 6
Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDE
Summary of the content on the page No. 7
TABLE OF CONTENTS MP3 FILE INFORMATION...................................................1 POWER SUPPLY ...................................................................2 FEATURE LAYOUT..............................................................4 LCD DISPLAY INDICATORS...............................................5 PLAYING A CD.....................................................................5 BASIC FEATURES ................................................................6 REPEAT
Summary of the content on the page No. 8
MP3 FILE INFORMATION WHAT IS MP3? MP3 is the abbreviation of “MPEG 1 Audio Layer 3”. MPEG Audio is a compression specification that compresses the audio portion only. This audio compression method is used in DVD and Video CD, etc. The audio data has been compressed into about 1/10 the size of a normal audio file. SEQUENCE OF PLAYING MP3 FILES MP3 files will be played in the sequence that the writing software had recorded. Therefore, it may be different between the sequence that you w
Summary of the content on the page No. 9
search or folder search may not be performed smoothly. You should not write non-MP3 files or unneeded folders along with MP3 files on the CD. POWER SUPPLY RECHARGEABLE NICKEL - CADMIUM BATTERY INSTALLATION 1. Remove the battery compartment cover by sliding the cover away from the DMP-CD100. 2. Insert the rechargeable nickel-cadmium battery into the battery compartment. Be sure to observe the proper polarity (The + and - signs, as indicated inside the battery compartment). NOTE
Summary of the content on the page No. 10
The DMP-CD100 is equipped with battery recharging circuitry. For safety measures, it requires specifically made NICAD (Nickel-Cadmium) batteries. Use ONLY the following rechargeable battery types: KENWOOD NB-77 / NB-88, PANASONIC RP-BP60D, SONY NH-DM2AA or equivalent. NOTE: It is always a good idea to let Nickel-Cadmium batteries run all the way down before charging them. When you do charge them, do so to their full potential and they will last longer and provide more power. ALKALINE
Summary of the content on the page No. 11
FEATURE LAYOUT 1. Disc Compartment Door 11. DBBS switch 2. Electronic Shock Protection 12. Door Open Switch Button (ESP) 13. Hold switch 3. Stop Button 14. Volume knob 4. Program Button 15. Line Out Jack 5. Reverse skip/Search Button 16. Headphone Jack 6. Display Window 17. Power Indicator 7. Play/Pause Button (Charging Indicator) 8. Mode/ Repeat Button 18. Batteries Compartment 9. Forward skip/Search Button 19. AC-DC adaptor Input Jack 10. Track Digit Button (T.Digit) 4
Summary of the content on the page No. 12
LCD DISPLAY INDICATORS PLAYING A CD 1. Connect the headphones to the headphone jack. 2. Set the volume knob to minimum. 3. Slide the door open switch to open the Disc compartment door. 4. Insert a disc (CD or CD-R) with the label side facing up. 5. Push down on the center of the front edge of the door to close securely. 6. Slide the hold switch to the “OFF” position. 7. Press the Play/Pause button. The total number of tracks and total playing time will be shown on the LCD disp
Summary of the content on the page No. 13
1. Press the forward skip/search button once to skip to the beginning of the next track. 2. Press the forward skip/search button repeatedly to skip ahead to the beginning of other tracks. 3. Press the reverse skip/search button once to skip to the beginning of the current track. 4. Press the reverse skip/search button twice or more quickly to go back to previous tracks. SEARCH DURING PLAY MODE 1. Press and hold the skip/search button to quickly advance or reverse through the music
Summary of the content on the page No. 14
2. Set the volume knob to a low listening level before activating the DBBS switch, then adjust to your preference. Note: The DBBS uses more battery power, thus drawing battery life more quickly. Switch the DBBS to the Off position to conserve battery power. REPEAT FEATURES REPEAT ONE PLAY 1. Press the REPEAT/MODE Button until the (REPEAT 1) Indicator appear on the display. 2. Select the desired track by pressing the FORWARD OR REVERSE SKIP / SEARCH Button. 3. The selected track wi
Summary of the content on the page No. 15
running out of lines in the tank. 4. In case of excessive vibration, the memory data may be exhausted and the Electronic Shock Protection (ESP) may become temporarily ineffective. NOTE: The battery power consumes more quickly when the Electronic Shock Protection control is used. It is therefore recommended to set the ESP control off when the DMP-CD100 is used in a place free of vibration. ADVANCED PLAYING MODES INTRO PLAY (INTRO) 1. Press the STOP button until the total track number
Summary of the content on the page No. 16
1. Press the STOP Button once to stop the program play. 2. Press the PROGRAM Button repeatedly to display programmed tracks one by one in the programmed order. TO CLEAR THE PROGRAMMED CONTENTS 1. Press the STOP button twice or open the compartment door to clear the program. RANDOM PLAY (RDM) 1. Press the STOP button until the total track number and total playtime appear on the display. 2. Press the REPEAT/MODE button until you see the Random Indicator (RDM) flash on the display.
Summary of the content on the page No. 17
Notes: This function is not compatible with normal CD. REMOVING THE DISC 1. After pressing the STOP button, wait for the disc to stop rotating before sliding the DOOR OPEN switch to remove the disc. 2. Hold the disc by the edge while slightly pressing on the center spindle, then lift from the edge to release and remove the disc. HANDLING COMPACT DISCS The DMP-CD100 is designed to play CD/CD-R bearing the correct identification logos. Other discs may not conform to the CD/C
Summary of the content on the page No. 18
their cases after use to avoid serious scratches. Do not expose discs to direct sunlight, high humidity, high temperatures, or dust etc. Prolonged exposure to extreme temperatures can warp the disc. Do not stick or write anything on either side of the disc. Sharp writing instruments, or the inks used in some felt-tip pens, may damage its surface. CLEANING DISCS Fingerprints should be carefully wiped from the surface of the disc with a soft cloth. Unlike unconventional records, compac
Summary of the content on the page No. 19
TROUBLESHOOTING GUIDE Check the following guide for problem resolution. SYMPTOM CAUSE SOLUTION CD Player will not Hold Switch position is Turn the Hold Switch to the turn on “ON”. “OFF” position. Dead or weak batteries. Replace batteries. AC adaptor not Check AC adaptor connected properly. connection. Disc will not play Disc inserted incorrectly. Reinsert disc with label side Defective compact disc. facing up. CD compartment not Try another compact disc. closed. Close lid securel
Summary of the content on the page No. 20
SPECIFICATIONS • 1 Bit D/A Converter. • Digital Filter 8 Times Over-sampling. • Auto CD/MP-3 Detectable (reads CD/CD-R). • 3 Spot Optical Pick-up. • Up to 22 Selected Music St oring Ability. • Up to 255 Music Selection of MP-3 Mode. • Fast Track Selector in MP-3 Mode. • Continue/ Intro/ Single Music/ Program/ Random Play Mode. • Repeat Function. • Bass Boost. • Audio Line Out. • Rechargeable Battery Function. Power Source : AC Adapter : Input 4.5V - 8V or Battery : DC 3V (AA1.
