Summary of the content on the page No. 1
U S E R ’ S G U I D E
5200 SERIES 220-240V
3 Safety Instructions
4 Product View
Assembly
5
6-7 Operation
8 Maintenance and Care
9 Troubleshooting
10 Consumer Services
11 Replacement Parts
12 Warranty
Summary of the content on the page No. 2
Thank you for buying a BISSELL Flip-It™ We’re glad you purchased a BISSELL Flip-It. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Flip-It is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sw
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, ■ Keep openings free of dust, lint, hair, etc. basic precautions should be observed, ■ Keep appliance on a level surface. including the following: ■ Turn off all controls before unplugging. ■ Do not unplug by pulling on cord. Unplug by grasping REaD all InStRUctIonS the plug, not the cord. bEfoRE USInG yoUR ■ Be extra careful when cleaning stairs. ■ flIp-It™. Do not use without Filter in place. ■ Close attention is
Summary of the content on the page No. 4
Product view Spray Trigger Cord Clip Quick Release Carry Cord Wrap handle Power Cord on/off Switch Clean Tank Pleated Filter Dirty Tank Removable Gentle Clean™ Brush & Pad Dry Vacuum Suction Path Removable Wet Vacuum Wet Cleaning Suction Path Nozzle caUtIon: Do not over wet the floor. apply formula by pressing the spray trigger on the forward stroke only and releasing the spray trigger on the backward stroke. over wetting the floor surface may cause delamination of certain la
Summary of the content on the page No. 5
Assembly 1 assembling your new bISSEll f lip-It is a simple 2 step process: notE: Remove clean tank from unit first. 1. Insert the handle into the top of the unit, making sure the spray trigger is on the wet vacuum side. Make sure the screw opening in the handle is aligned with the hole in the housing of the unit. 2 2. Insert screw; gently screw in until tight with the body of the unit. Power WaRnInG: Cord Do not plug in your cleaner until you have completely assembled it per
Summary of the content on the page No. 6
Operation Getting ready 1. Remove the clean tank from the machine. 2. Unscrew the black cap on the bottom of the clean tank and remove the Insert. 3. filling the clean tank: Fill with BISSELL formula to the formula fill Tip: line and fill with water to the water line. Replace the insert and cap assembly. Place When using a the full tank back into the unit. Dry Gentle Clean™ Pad, you may Inserting the Gentle Clean™ Brush or Pad want to get it t he first time you use your unit, the G
Summary of the content on the page No. 7
Operation Flipping from dry to wet cleaning Tip: to change from dry vacuuming, to wet cleaning simply flip the unit around to the wet vacuum To extend the life side! of your filter and to t he Gentle clean™ brush or pad and squeegee maintain maximum will automatically be lowered to effectively clean dry suction, check the and dry all your hard floor surfaces. filter for lint and debris Wet cleaning/vacuuming frequently. to begin wet cleaning, simply pull the spray trigger. Water and f
Summary of the content on the page No. 8
Maintenance and care Checking the filter WaRnInG: While the dirty tank is out of the unit, remove the to reduce the risk of pleated filter from the top of the tank. Remove fire, electric shock or dirt and debris from the pleats by gently tapping injury unplug from outlet the f ilter over the wastebasket or outside. before servicing. t he pleated filter can also be rinsed under water to clean. notE: If the pleated filter is rinsed with warm water to clean, it is recommended to le
Summary of the content on the page No. 9
Troubleshooting W a Rn In G: to reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Water & formula are draining out from the clean tank possible causes Remedies 1. Clean tank black cap & insert are not on tight 1. Remove black cap & insert and attach tightly 2. Clean tank black cap & insert are cross threaded 2. Remove black cap & insert and make sure it is screwed on straight and tig
Summary of the content on the page No. 10
BISSELL Consumer Services If your bISSEll product should require service: In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair. If you have questions about your warranty or need replacement parts please contact the numbers below. for UK inquiries: for australian inquirie
Summary of the content on the page No. 11
Replacement parts - BISSELL Flip-It™ Item part no. part name 1 203-6705 Pleated Filter 2 203-6706 Dirty Tank Lid Assembly 3 203-6707 Dirty Tank for australian inquiries: 4 203-6708 Wet Cleaning Nozzle monday - Friday 9 am — 5 pm 5 203-6725 Clean Tank with Cap and Insert bISSEll aUSt Ral Ia pty l IMIt ED 6 203-6711 Handle with Screw -Acier 42 Rocco Drive 7 203-6713 Cap and Insert Assembly Scoresby 3179 8 203-6714 Cord Wrap - Acier Victoria ™ 9 203-6700 Gentle Clea
Summary of the content on the page No. 12
Warranty - BISSELL Flip-It This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or contact your local in country distributor. limited two year Warranty Subject to the *EXCEPTIoNS AND EXCLUSIoNS identified below, BISSELL homecar
