Whirlpool W10224611A user manual

User manual for the device Whirlpool W10224611A

Device: Whirlpool W10224611A
Category: Clothes Dryer
Manufacturer: Whirlpool
Size: 5.61 MB
Added : 10/22/2013
Number of pages: 32
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Whirlpool W10224611A. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Whirlpool W10224611A.

For your convenience

If looking through the Whirlpool W10224611A user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Whirlpool W10224611A on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Whirlpool W10224611A to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Whirlpool W10224611A User manual - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Whirlpool W10224611A but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Whirlpool W10224611A. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

DRYER INSTALLATION INSTRUCTIONS
GAS (U.S.A. AND CANADA)
ELECTRIC (CANADA ONLY)
INSTRUCTIONS D'INSTALLATION DE LA SÉCHEUSE
À GAZ (É.-U. ET CANADA)
ÉLECTRIQUE (CANADA UNIQUEMENT)
TABLE OF CONTENTS TABLE DES MATIÈRES
DRYER SAFETY..............................................................................2 SÉCURITÉ DE LA SÉCHEUSE ....................................................17
INSTALLATION REQUIREMENTS................................................4 EXIGENCES D'INSTALLATION...............

Summary of the content on the page No. 2

DRYER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don't immediately DANG

Summary of the content on the page No. 3

WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS: Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Clear the room, building, or area of all occupants. • Immediat

Summary of the content on the page No. 4

INSTALLATION REQUIREMENTS Tools and Parts Optional Equipment Gather the required tools and parts before starting installation. Read Refer to your Use and Care guide for information about the accessories available for your dryer. and follow the instructions provided with any tools listed here. For All Installations: Location Requirements ■ Flat-blade screwdriver ■ Caulking gun and compound (for installing new exhaust ■ #2 Phillips screwdriver vent) ■ Adjustable wrench that ■ Tin snips (new

Summary of the content on the page No. 5

Custom undercounter installation - Dryer only Dryer Dimensions A D B C* DE* A Steam Non-Steam (Electric or Gas) (Electric or Gas) A 0" (0 mm) 0" (0 mm) B 38" (9652 mm) 38" (9652 mm) B C C* 1" (25 mm) 1" (25 mm) D 27" (686 mm) 27" (686 mm) Steam Non-Steam E* 1" (25 mm) 1" (25 mm) (Electric or Gas) (Electric or Gas) *Required spacing A 38" (9652 mm) 38" (9652 mm) NOTE: Some models are not recommended for undercounter 9 1 B 32 /16" (686 mm) 31 /2" (800 mm) installation. C 27" (686 mm) 27" (686 m

Summary of the content on the page No. 6

Recessed or closet installation - Dryer on pedestal Recommended installation spacing for cabinet installation NOTE: Some models are not recommended for cabinet installation. (460 mm) ■ For cabinet installation, with a door, minimum ventilation openings in the top of the cabinet are required. A* B* F** A B C D* E C* Steam Non-Steam (Electric or Gas) (Electric or Gas) A 1" (25 mm) 1" (25 mm) B 27" (686 mm) 27" (686 mm) C 1" (25 mm) 1" (25 mm) D* 1" (25 mm) 1" (25 mm) 9 1 E 32 /16" (686 mm) 31 /

Summary of the content on the page No. 7

Mobile home - Additional installation requirements Recommended installation spacing for recessed or This dryer is suitable for mobile home installations. The installation closet installation, with stacked washer and dryer must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for The dimensions shown are for the recommended spacing. Mobile Home Construction and Safety, Title 24, HUD Part 280) or Standard CAN/CSA-Z240 M

Summary of the content on the page No. 8

ELECTRIC DRYER POWER HOOKUP – CANADA ONLY For further information, please reference the service numbers located in the “Assistance or Service” section. Electrical Requirements GROUNDING INSTRUCTIONS WARNING ■ For a grounded, cord-connected dryer: This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This dryer is equipped with a cord having an equipment-ground

Summary of the content on the page No. 9

GAS DRYER POWER HOOKUP ■ Lengths over 20 ft (6.1 m) should use larger tubing and a different size adapter fitting. Gas Supply Requirements 3 ■ If your dryer has been converted to use LP gas, /8" LP compatible copper tubing can be used. If the total length of the WARNING supply line is more than 20 ft (6.1 m), use larger pipe. NOTE: Pipe-joint compounds that resist the action of LP gas ®† must be used. Do not use TEFLON tape. ■ Must include a shutoff valve: In the U.S.A.: An individual manua

Summary of the content on the page No. 10

3. Open the shutoff valve in the supply line. The valve is open when Dryer gas pipe the handle is parallel to the gas pipe. A ■ The gas pipe that comes out through the rear of your dryer has a 3 /8" male pipe thread. B B A. Closed valve *6¼" B. Open valve (159 mm) 4. Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found. 1½" A (38 mm) VENTING 1 A. /2" NPT gas supply line 3 B. /8" NPT dryer pipe Venti

Summary of the content on the page No. 11

■ 4" (102 mm) heavy metal exhaust vent and clamps must be Exhaust used. A and B: Recommended hood styles. C: Acceptable hood style. B 4" C 102 mm 4" (102 mm) A 4" (102 mm) heavy metal exhaust vent 4" Vent products can be purchased from your dealer or by calling (102 mm) 2½" Whirlpool Service. For more information, see the “Assistance or (64 mm) Service” section. 4" (102 mm) Rigid metal vent ■ For best drying performance, rigid metal vents are A. Louvered hood style recommend

Summary of the content on the page No. 12

■ Periscope Installation (For use with dryer vent to wall vent Optional exhaust installations mismatch): This dryer can be converted to exhaust out the right side, left side or through the bottom. If you prefer, you may contact your local dealer Part Number 4396037 - 0" (0 mm) to 18" (460 mm) mismatch to have the dryer converted. Part Number 4396011 - 18" (460 mm) to 29"(737 mm) mismatch Part Number 4396014 - 29" (737 mm) to 50" (1270 mm) WARNING mismatch Special provisions for mobile home i

Summary of the content on the page No. 13

Install Vent System CONNECT INLET HOSE 1. Install exhaust hood. Use caulking compound to seal exterior wall opening around exhaust hood. (STEAM MODELS) 2. Connect vent to exhaust hood. Vent must fit inside exhaust hood. Secure vent to exhaust hood with 4" (102 mm) clamp. The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses. 3. Run vent to dryer location. Use the straightest path possible. See “Determine vent path” in “Plan Vent System.” Avoid

Summary of the content on the page No. 14

9. Attach angled end of long hose to fill valve at bottom of dryer back panel. Screw on coupling by hand until it is seated on fill valve connector. COMPLETE INSTALLATION 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all of your tools. 3. Dispose of/recycle all packaging materials. 4. Check the dryer’s final location. Be sure the vent is not crushed or kinked. 5. Check that the dryer is

Summary of the content on the page No. 15

TROUBLESHOOTING First try the solutions suggested here and possibly avoid the cost of a service call... ■ “AF” (low airflow condition): The dryer will continue to run when this diagnostic code is Dryer Operation present. Press any key to clear the code from the display and return to the estimated time remaining. Dryer will not run ■ Try the following: Clean lint screen. ■ Has a household fuse blown, or has a circuit breaker tripped? ■ Check to see if the vent run from the dryer to the

Summary of the content on the page No. 16

■ Are fabric softener sheets blocking the grille? Use only one fabric softener sheet, and use it only once. Dryer Results ■ Is the exhaust vent the correct length? Check that the exhaust vent is not too long or has too many Clothes are not drying satisfactorily, drying times are too turns. Long venting will increase drying times. See the long, or load is too hot Installation Instructions. ■ Is the exhaust vent diameter the correct size? ■ Is the lint screen clogged with lint? Use 4"

Summary of the content on the page No. 17

SÉCURITÉ DE LA SÉCHEUSE Votre sécurité et celle des autres est très importante. Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer. Voici le symbole d’alerte de sécurité. Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous et à d’autres. Tous les messages de sécurité suivront le symbole d’alerte de sécurit

Summary of the content on the page No. 18

AVERTISSEMENT : L’odorat ne permet pas toujours la détection d’une fuite de gaz. Les distributeurs de gaz recommandent l’emploi d’un détecteur de gaz (homologation UL ou CSA). Pour d’autre information, contacter le fournisseur de gaz local. En cas de détection d’une fuite de gaz, exécuter les instructions “Que faire dans le cas d’une odeur de gaz”. IMPORTANT : L'installation du gaz doit se conformer aux codes locaux, ou en l'absence de codes locaux, au code canadien d'installation B149.1 du gaz

Summary of the content on the page No. 19

EXIGENCES D’INSTALLATION Pièces nécessaires Consulter les codes locaux. Vérifier l’alimentation électrique et le Outillage et pièces circuit d’évacuation existants. Voir “Spécifications électriques “et” Rassembler les outils et pièces nécessaires avant de commencer Exigences concernant l’évacuation” avant d’acheter les pièces. l’installation. Lire et suivre les instructions fournies avec les outils Les installations pour maison mobile nécessitent un système indiqués ici. d’évacuation en mét

Summary of the content on the page No. 20

■ Modèles à vapeur uniquement : Les robinets d’eau froide ■ Il faut aussi prendre en compte l’espace requis entre les doivent être situés à moins de 4 pi (1,2 m) de la sécheuse appareils voisins. et la pression de l’eau doit être de 20 à 100 lb/po² Installation personnalisée sous un comptoir - (137,9 à 689,6 kPa). Vous pouvez utiliser l’alimentation en eau sécheuse seulement droite de votre laveuse à l’aide du connecteur en “Y” fourni. Ne pas faire fonctionner la sécheuse à des températur


Alternative user manuals
# User manual Category Download
1 Whirlpool 3395339 User manual Clothes Dryer 105
2 Whirlpool 240-volt User manual Clothes Dryer 61
3 Whirlpool 3396304 User manual Clothes Dryer 15
4 Whirlpool 3393 137 User manual Clothes Dryer 8
5 Whirlpool 3390148 User manual Clothes Dryer 7
6 Whirlpool 3397627C User manual Clothes Dryer 10
7 Whirlpool 240-VOLT ELECTRIC DRYER User manual Clothes Dryer 14
8 Whirlpool 3397617 User manual Clothes Dryer 5
9 Whirlpool 340 1094 User manual Clothes Dryer 34
10 Whirlpool 3405792 User manual Clothes Dryer 0
11 Whirlpool 3401092 User manual Clothes Dryer 0
12 Whirlpool 3401086 User manual Clothes Dryer 1
13 Whirlpool 3401011 User manual Clothes Dryer 2
14 Whirlpool 3402328 User manual Clothes Dryer 0
15 Whirlpool 3978909 User manual Clothes Dryer 1
16 ACS 882.00284.00 User manual Clothes Dryer 0
17 ACS 255 CMF (85 User manual Clothes Dryer 0
18 ACS 380 M3 /hr) User manual Clothes Dryer 0
19 Philips 1.07E+23 User manual Clothes Dryer 1
20 Philips 1.07E+31 User manual Clothes Dryer 3