Summary of the content on the page No. 1
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
KD-AR600/KD-SC500
KD-AR600
S
7
KD-SC500
S
7
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la
página 8.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler,
référez-vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al ma
Summary of the content on the page No. 2
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Summary of the content on the page No. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 MP3/WMA OPERATIONS.................. 18 How to use the M MODE button ............... 3 Playing a disc ............................................ 18 Locating a file or particular portion LOCATION OF THE BUTTONS ............ 4 on a disc ...
Summary of the content on the page No. 4
LOCATION OF THE BUTTONS Control panel Display window gh j kl / d f zx cv 1234 5 678 9 p qw er ty uio;a s 1 Remote sensor Display window 2 Control dial d Tuner reception indicators—MO (monaural), 3 SEL (select) button ST (stereo) 4 (standby/on/attenuator) button f Disc type indicators—WMA, MP3 5 Screw - M2 x 5 mm (M2 x 1/4") g CH (CD changer) indicator 6 Plate cover and standard plate (only for KD-AR600) 7 FM/AM button h CD indicator 85 (up) button j Playback mode/item indicators—RND (random), +1
Summary of the content on the page No. 5
3 • Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. • Skips to the first file of the previous folder while listening to an MP3 or a WMA disc. Each time you press the button, you can move to the previous folder and start playing the first file. • While playing an MP3 disc on an MP3- compatible CD changer (only for KD-AR600); – Skips to the previous disc if pressed
Summary of the content on the page No. 6
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) Remote sensor 7 WARNING: • Store the battery in a place where children cannot reach. • Do not expose the remote sensor to strong If a child accidentally swallows the battery, light (direct sun
Summary of the content on the page No. 7
BASIC OPERATIONS 7 1 3 2 Turning on the power Volume level indicator 1 Turn on the power. Volume level appears. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have 4 Adjust the sound as you want. (See to press this button to turn on the power. pages 23 and 24.) 2 Select the source. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in
Summary of the content on the page No. 8
7 3 Select “DEMO OFF.” Canceling the display demonstration When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the display demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below: 1 Press and hold SEL (select) for more 4 Finish the setting. than 2 seconds so that one of the PSM items appears on the display.
Summary of the content on the page No. 9
Setting the clock 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 25 and 26.) To check the current clock time or change the display mode Press DISP (display) repeatedly. Each time you press the button, 2 Set the hour. the display changes as follows: 1 Select “CLOCK H” (hour) if not shown on the display. • During tuner operation: 2 Adjust the hour. • During disc operation: Notes: • If a name has been
Summary of the content on the page No. 10
RADIO OPERATIONS 7 To stop searching before a station is Listening to the radio received, press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Searching a station automatically: Auto search Manual search 1 Select the band (FM1 – 3, AM). 1 Select the band (FM1 – 3, AM). Each time you press the button, the band changes as Each time you press the follows: button, the band ch
Summary of the content on the page No. 11
Storing stations in memory 3 Tune in to a station you want while “M” (manual) is flashing. You can use one of the following two methods to To tune in to stations store broadcasting stations in memory. of higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM You can preset 6 local FM stations in each FM • If you release your finger from th
Summary of the content on the page No. 12
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. numbers. Ex.: Storing an FM station of 92.5 MHz into the Notes: preset number 1 of the FM1 band. • A previously preset station is erased when a new station is stored in the same preset number. 1 Select the band (FM1 – 3, AM) you • Preset stations are erased when the power supply to want to store stations into (in this the memory circu
Summary of the content on the page No. 13
CD OPERATIONS 7 Refer “MP3/WMA OPERATIONS” on pages 18 to The display changes to show the following: 22 for operating MP3/WMA discs. Current source CD indicator indication Playing a CD 1 Open the control panel. Note: When a CD is already in the loading slot, Total track number Total playing time pressing CD turns on the unit and starts of the inserted disc of the inserted disc playback automatically. 2 Insert a CD into the loading slot. The unit turns on, draws the CD and starts playback Elapsed
Summary of the content on the page No. 14
To stop play and eject the CD To go to a particular track directly Press 0. Press the number button corresponding to the CD play stops and the control panel flips down. track number to start its playback. The CD automatically ejects from the loading 7 slot. The source changes to the previously selected source. • If you change the source, CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD • To select a track number from 1 – 6: play starts from where playback
Summary of the content on the page No. 15
To play back tracks repeatedly How to use the +10 and –10 buttons (Track Repeat Play) • Ex. 1: To select track number 32 while You can play back the current track repeatedly. playing track number 6 1 Press M MODE to enter the functions mode while playing a CD. (Three times) (Twice) 2 Press RPT (repeat), while “MODE” Track 6 \ 10 \ 20 \ 30 \ 31 \ 32 is still flashing on the display, so that the “TRK RPT” appears on the • Ex. 2: To select track number 8 while playing display. track number 36 Each
Summary of the content on the page No. 16
Playing a CD Text Prohibiting disc ejection In a CD Text, some information about the disc (its You can prohibit disc ejection and can lock a disc disc title, performer, and track title) is recorded. in the loading slot. This CD Text information will be shown automatically when you play a CD Text. While pressing CD, press and hold for more than 2 seconds. To change the CD Text information manually, select text display mode while playing a CD Text. Press DISP (display) repeatedly. Each time you p
Summary of the content on the page No. 17
Hierarchy MP3/WMA INTRODUCTION What are MP3/WMA? How are MP3/WMA files recorded and played back? MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3. MP3 is simply a MP3/WMA “files (tracks)” can be recorded in file format with a data compression ratio of 1:10 “folders” —in PC terminology. (128 Kbps*). During recording, the files and folders can be * Bit rate is the average number of bits that one arranged in a way similar to arranging files and second of audio data wil
Summary of the content on the page No. 18
MP3/WMA OPERATIONS 7 Refer also to “CD OPERATIONS” on pages The display changes to show the following: 13 to 16. Current source CD indicator indication Playing a disc 1 Open the control panel. Note on One-Touch Operation: When a disc is already in the loading slot, WMA or MP3 indicator* pressing CD turns on the unit and starts playback automatically. 2 Insert a disc into the loading slot. The unit turns on, Total folder Total file draws the disc and number number starts playback automatically. E
Summary of the content on the page No. 19
Note: To stop play and eject the disc • The display shows up to 8 characters at a time and Press 0. scrolls if there are more than 8 characters. Playback stops and the control panel flips down. See also “To select the scroll mode—SCROLL” on The disc automatically ejects from the loading page 28. slot. • When folder or file name is shown, current folder number or the indicator and current file number To change the display information also appear on the right side of the display. While playing ba
Summary of the content on the page No. 20
To go to a particular file quickly within the To go to a particular folder directly current folder (+10 and –10 buttons) IMPORTANT: 1 Press M MODE to enter the functions mode To directly select the folders using the number while playing a disc. button(s), it is required that folders are assigned 2 digit numbers at the beginning of their folder names. (This can only be done during the recording of CD-Rs or CD-RWs.) Ex.: If folder name is “01 ABC” 2 Press +10 or –10. = Press 1 to go to Folder 01 A
