DeVillbiss Air Power Company Companion D21543 user manual

Summary of the content on the page No. 1

General
Manual
Model No.
919.19007
Air Tool Set
� SAFETY GUIDELINES
IMPORTANT:
Read the Safety Guidelines
 OPERATION
and All Instructions Carefully
Before Operating
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
D21543 Rev. 0 7/14/00

Summary of the content on the page No. 2

SAFETY GUIDELINES - DEFINITIONS
             
  Information for preventing damage to URGENT SAFETY INFORMATION - A HAZARD       
 equipment. THAT WILL CAUSE SERIOUS INJURY OR LOSS 
    OF LIFE.    
           IMPORTANT SAFETY INFORMATION - A Information that you should pay special   

Summary of the content on the page No. 3

WHAT COULD HAPPEN HOW TO PREVENT IT HAZARD  Always wear MSHA/NIO5H  Abrasive tools, such as grinders and approved, properly fitting face sanders generate dust and abrasive materials which can be harmful to mask or respirator when using such RISK TO BREATHING tools. human lungs and respiratory system. INHALATION HAZARD  Some materials such as adhesives and tar,  Always work in a clean, dry, well contain chemicals whose vapors could ventilated area. cause serious injury with prolonged exposure

Summary of the content on the page No. 4

MODEL 919.19009 1/2” IMPACT WRENCH SPECIFICATION CHART Torque 230 ft./lbs. @ 7000 RPM’s Maximum Working Pressure 90 PSI Air Inlet 1/4” NPT Recommended Hose Size 3/8” I.D. Minimum CFM Required @ 90 PSI 8 CFM (25% usage) #1 Approximately 150 ft./lbs. Torque #2 Approximately 190 ft./lbs. Torque #3 Approximately 210 ft./lbs. Torque TORQUE #4 Approximately 230 ft./lbs. Torque REGULATOR 1 KNOB
   4 2  3  

Summary of the content on the page No. 5

MODEL 919.19008 3/8” AIR RATCHET WRENCH SPECIFICATION CHART Free Speed 150 RPM (Forward/Reverse) Maximum Working Pressure 90 PSI Air Inlet 1/4" NPT Recommended Hose Size 3/8" I.D. Minimum CFM Required @ 90 PSI 5.5 CFM (25% usage) Torque Delivered @ 150 RPMS 45 Ft./Lbs. Follow instructions for lubricating and changing accessories. Maintain tools with care. OPERATING INFORMATION Lubrication Air Supply Air tools require lubrication throughout the life of the tool. Recommended Air Compressor: 1 HP

Summary of the content on the page No. 6

SERVICE NOTES D21543 6 — ENG

Summary of the content on the page No. 7

SERVICE NOTES 7 — ENG D21543

Summary of the content on the page No. 8

General Air Tool Set Manual For the repair or replacement parts you need Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) MODEL NO. For in-home major brand repair service Call 24 hours a day, 7 days a week 919.19007 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Parts and Repair Center in your area Call 24 hours a day, 7 days a week FULL ONE YEAR WARRANTY AIR TOOL 1-800-488-1222 If this air tool fails due to a defect in material or workmanship within one year from the