Our goal is to provide you with a quick access to the content of the user manual for Electrolux S75348KG5. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Electrolux S75348KG5.
If looking through the Electrolux S75348KG5 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Electrolux S75348KG5 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Electrolux S75348KG5. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
User manual Fridge-Freezer
2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. CONTENTS SAFETY INFORMATION 2 HELPFUL HINTS AND TIPS
Safety information 3 the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission. Children and vulnerable people safety • This app
4 Safety information 2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 1) 6. You must not operate the appliance without the lamp cover of interior lighting. • This appliance is heavy. Ca
Control panel 5 • Adequate air circulation should be around the appliance, lacking this leads to overheat- ing. To achieve sufficient ventilation follow the instructions relevant to installation. • Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn. • The appliance must not be located close to radiators or cookers. • Make sure that the mains plug is accessible after the installation of the a
6 Control panel 12 Freezer temperature indicator 13 Freezer temperature regulator, - button 14 Alarm reset button 15 Alarm indicator Switching on 1. Insert the plug into the mains socket. 2. Set ON/OFF switch to ON. 3. The alarm indicator light flashes since the temperature is reached. The acoustic alarm sounds. 4. Press the alarm reset button to reset the alarm. Switching off To switch the entire appliance off: 1. Set ON/OFF switch to OFF. 2. Disconnect the mains plug from the mains socket. Tem
First use 7 1. press continuously the temperature regulator (+ button) until the letter "H" (Holiday) appears on the temperature indicator. The Holiday function sets the temperature ap- prox +15°C. The refrigerator is in the energy-saving mode. To deactivate the function: 1. set the required temperature by pressing the fridge temperature regulator. FROSTMATIC function The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from und
8 Daily use In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer than the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooling). Thawing Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator com- partment or at room temperature, depending on the time available for this operation. Small pieces
Daily use 9 Vegetable Drawer The drawer is suitable for storing fruit and vege- tables. There is a separator inside the drawer that can be placed in different positions to allow for the subdivision best suited to personal needs. 1 There is a grille (if foreseen) on the bottom of the drawer to separate the fruit and vegetables from any humidity that may form on the bot- 2 tom surface. All parts inside the drawer can be removed for cleaning purposes Positioning the door shelves To permit storage o
10 Helpful hints and tips Removal of freezing baskets from the freezer 2 1 2 1 The freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull the basket towards yourself and, upon reaching the end point, remove the basket by tilting its front upwards. At the time of putting it back, slightly lift the front of the basket to insert it into the freezer. Once you are over the end points, push the baskets back in their posi
Care and cleaning 11 Hints for refrigeration Useful hints: Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegeta- ble drawer. For safety, store in this way only one or two days at the most. Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf. Fruit and vegetables: these should be thoroughly cleaned and placed in the special draw- er(s) provided. Butter and cheese: these should be placed in special airtight containers or wrapp
12 Care and cleaning This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. • regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly. Do not pull, move or damage any pipes and/or cables inside the cabinet
What to do if… 13 Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compart- ment, driven by an automatically controlled fan. WHAT TO DO IF… CAUTION! Before troubleshooting, disconnect the power supply. Only a qualified electrician or competent
14 What to do if… Problem Possible cause Solution Water flows on the The melting water outlet does Attach the melting water outlet ground. not flow in the evaporative tray to the evaporative tray. above the compressor. Products are not wrapped prop- Wrap the products better. There is too much frost and ice. erly. The door is not closed correctly. Refer to "Closing the door". The Temperature regulator may Set a higher temperature. be set incorrectly. The temperature in the The door is not close
Technical data 15 Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective door gaskets. Contact the Service Center. TECHNICAL DATA Dimension Height 1850 mm Width 595 mm Depth 648 mm Rising Time 18 h The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. INSTALLATION WARNING! Read the "Safety Information" carefully for your safety a
16 Installation Location The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned be- low an overhanging wall unit, the minimum dis- tance between the top of the cabinet and the B A wall unit must be at least 100 mm . Ideally, how- ever, the appliance should not be positioned be- low overhanging wall units. Accura
Installation 17 3 Brown: Live 5 Blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow. 2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3. Connect the wire coloured br
18 Installation Levelling When placing the appliance ensure that it stands level. This can be achieved by two adjust- able feet at the bottom in front. Removing the shelf holders Your appliance is equipped with shelf retainers that make it possible to secure the shelves dur- A ing transportation. To remove them proceed as follows: 1. Move the shelf holders in the direction of the arrow (A). 2. Raise the shelf from the rear and push it for- ward until it is freed (B). B 3. Remove the retainers (C
Installation 19 1. Open the doors. Unscrew the middle hinge (m2). Remove the plastic spacer m1 m2 (m1). 2. Remove the spacer (m6) and move to the other side of the hinge pivot (m5). 3. Remove the doors. 4. Remove the left-hand cover pin of the m6 m5 middle hinge (m3,m4) and move to the other side. 5. Fit the pin of the middle hinge (m5) in- to the left-hand hole of the lower door. m4 m3 6. Remove using a tool the cover (b1). Un- screw the lower hinge pivot (b2) and b1 the spacer (b3) and place t
20 Environmental concerns 10. Remove the handle. Unscrew the top h1 h2 h3 handle bracket from the handle rod (h1). Unscrew the bottom handle brack- et from the door (h2) Unscrew the top handle bracket from the door (h3). 11. Install the handle in the opposite side. h4 h5 h6 Re-screw the handle bracket on the door (h4). Turn the handle bracket with the handle and screw them to the door (h5) and the fitted handle bracket (h6). 12. Re-insert the lower door on the lower hinge pivot (b2). 13. Insert