Our goal is to provide you with a quick access to the content of the user manual for Electrolux SANTO 1650-6 TK. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Electrolux SANTO 1650-6 TK.
If looking through the Electrolux SANTO 1650-6 TK user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Electrolux SANTO 1650-6 TK but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Electrolux SANTO 1650-6 TK. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important infor- mation for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. These operating instructions are for use with several technically com- parable models with varying accessories. Please observe the notes which apply to your
Contents Important Safety Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Disposal of old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Remove transport packaging . . . . . . . . . . . . . . . . . . . . . .
Important Safety Instructions These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. Your safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance. Intended use • The refrigerator is intended for use in the home. It is suitable for the storing of food at low temperature. If the appliance is used for purposes other than those intend
• Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or remove spring or bolt catches, if fitted. By doing this you ensure that children cannot lock themselves in the appliance when playing (there is risk of suffocation!) or get themselves into other dangerous situations. • Often children cannot recognise the hazards present in household appliances. It is therefore important that you ensure adequate supervision and never let child
Disposal Appliance Packaging Information All materials are environmentally sound! They can be disposed of or burned at an incinerating plant without danger. About the materials: The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are all free of chloro- fluorocarbon. The carton parts are made from recycled paper and should be disposed of at a waste-paper recycling
Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperature. The appliance should therefore – not be exposed to direct sunlight; – not be installed next to radiators, cookers or other sources of heat; – only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed. The climate classification c
If your refrigerator is installed under A/B a continuous worktop, an air outlet 2 105 200 cm 2 opening of at least 200 cm and a ventilation grille (A/B) matching the C worktop design should be provided at 570 the rear of the worktop. 550 93-103 The cut surfaces of the worktop (C) should be varnished to avoid swelling due to penetration of moisture. The appliance wall distance must be AEG36 at least 30 mm and should be checked before the ventilation grille is inserted. Special accessories: A Vent
Reversing the door The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requires. Warning! When changing the side at which the door opens, the appli- ance must not be connected to the mains. Remove plug from the mains beforehand. Tilt the appliance slightly towards the + rear and prop it securely. Unscrew the door hinge screws (K) + and remove the hinge pin bracket (1). Open the door a little way and take it + 1 out downwa
Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial + start-up (see section: “Cleaning and Care”). Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as th
Plug socket The plug socket necessary for connection of your appliance to the electricity supply should be positioned so that it is possible to pull out the appliance plug. If your appliance is installed under a continuous worktop, the plug socket should be provided as shown. 130 Alternatively a concealed spur socket fitted with a 13 A fuse may be fitted. If the socket is not accessible once 300 the appliance is built in, the electrical installation must include suitable means of isolating the a
Starting up and temperature regulation Insert the plug of the connection lead into the plug socket with pro- + tective earth contact. When the refrigerator compartment door is ope- ned, the internal lighting is switched on. The temperature selector knob is located on the RH side of the refriger- ator compartment. Setting “0” means: Off. Turning clockwise in direction “1”: Refrigerating unit on, the latter then operating automatically. AEG62 Setting “1” means: Hightest temperature, warmest settin
Interior Accessories Storage shelves/wire trays Various glass or plastic storage shelves and wire trays are included with your appliance - different models have different combinations. You should always slide one of the full size glass storage shelves into + the lowest set of guides, above the fruit and vegetable containers, and keep it in this position. The height of the storage shelves can be adjusted: To do this pull the storage shelf forward until it can be swivelled + upwards or downward
Tip: Food in the fridge should always be covered or packaged, to pre- vent drying and tainting of other food. The following are suited for packaging: – Polyethylene airtight bags and wraps; – Plastic containers with lids; – Special plastic covers with elastic; – aluminium foil. Defrosting The fridge defrosts automatically The rear wall of the fridge covers with frost when the compressor is running, and defrosts when the compressor is off. The water from the thawing frost evaporates by itself. Sw
• Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapours can lead to the damage of plastic parts. • The appliance must be dry before it is placed back into service. Important! • Ethereal oils and organic solvents can attack plastic parts, e.g. – lemon juice or the juice from orange peel; – butyric acid; – cleansers which contain acetic acid. Do not allow such substances to come into contact with appliance part
Energy Saving Tips • Do not install the appliance near cookers, radiators or other sources of warmth. High ambient temperatures cause longer, more frequent operation of the compressor. • Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent openings. • Do not place warm foods into the appliance. Allow warm foods to cool first. • Only leave door open as long as necessary. • Do not set temperature any colder than necessa
Symptom Possible Cause Remedy Appliance is not switched Switch on the appliance. on. Mains plug is not plugged Insert mains plug. in or is loose. Appliance does not work. Fuse has blown or is Check fuse, replace if nec- defective essary. Mains malfunctions are to Socket is defective. be corrected by an electrician. Turn the temperature reg- Temperature is set too Appliance cools too much. ulator to a warmer cold. setting temporarily. Temperature is not Please look in the “Initial properly adjust
Symptom Possible Cause Remedy Appliance is not level. Readjust the feet. The appliance is touching Move the appliance the wall or other objects. slightly. Unusual noises. A component, e.g. a pipe, If necessary, carefully bend on the rear of the appliance the component out of the is touching another part of way. the appliance or the wall. The compressor does not start immediately after This normal, no error has The compressor starts after changing the temperature occurred. a period of time. setti
Service & Spare Parts In the event of your appliance requiring service, or if you wish to pur- chase spare parts, contact your local AEG Service Force Centre by tele- phoning: 08705 929 929 Your call will be automatically routed to the Service Centre covering your post code area. In guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for i
Noises during Operation The following noises are characteristic of refrigeration appliances: • Clicks Whenever the compressor switches on or off, a click can be heard. • Humming As soon as the compressor is in operation, you can hear it humming. • Bubbling/ When refrigerant flows into thin tubes, you can hear Splashing bubbling or splashing noises. Even after the compressor has been switched off, this noise can be heard for a short time. Regulations, Standards, Guidelines This appliance was