Our goal is to provide you with a quick access to the content of the user manual for Haier HTQ21JAARSS. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Haier HTQ21JAARSS.
If looking through the Haier HTQ21JAARSS user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Haier HTQ21JAARSS but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Haier HTQ21JAARSS. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Do Not Return This Product To The Store
If you have a problem with this product, please contact the "Haier Customer
Satisfaction Center" at 1-877-337-3639.
DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE
Ne pas Réexpédier ce Produit au Magasin
Pour tout problème concernant ce produit, veuillez contacter le service des
consommateurs ‘Haier Customer Satisfaction Center’ au 1-877-337-3639.
UNE PREUVE D’ACHAT DATEE EST REQUISE POUR BENEFICIER DE LA GARANTIE.
® TM What The World Comes Home To Top Mount No Frost Refrigerators Réfrigérateur à Congélateur Anti Givre Refrigeradores con Congelador Superior sin Escarcha User Manual- (Features may vary by model) 14, 16, 18, 21 cu. ft. models Guide de l’Utilisateur- (Les caractéristiques peuvent modèles à 0,4 0,45 0,5 0,6 m_ varier en fonction du modèle) Manual del Usuario- (Las funciones pueden variar según el modelo) para modelos de 0,4 0,45 0,5 0,6 m_
English SAFETY PRECAUTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the follow- ing: 1) Use this appliance only for its intended purpose as described in this use and care guide. 2) This refrigerator must be properly installed in accordance with the installation instructions before it is used. See grounding instructions in the installation section. 3) Never unplug your refrigerator by pulling on the p
English 10) This refrigerator should not be recessed or built-in an enclosed cabinet. It is designed for freestanding installation only. 11) Do not operate your refrigerator in the presence of explosive fumes. SAVE THESE INSTRUCTIONS DANGER Risk of child entrapment. Before you throw away your old refrigerator or freezer, take off the doors. Leave the shelves in place so that children may not easily climb inside. Thank you for using our Haier product. This easy-to-use manual will Model number
English Table Of Contents PAGE Safety Precautions ..........................................................................1 Parts And Features ..........................................................................4 Installing Your Refrigerator............................................................5 Unpacking Your Refrigerator ..................................................................5 Adjusting Your Refrigerator..................................................................
English Parts And Features 11 3 4 2 1 5 10 6 13 7 9 15 8 12 & 14 1. Ice Storage Bin (not on all models) 10. Covered Dairy Compartment 2. FULL WIDTH Wire Freezer Shelf 11. Interior Refrigerator Shelves (not on all models) (type and quantity varies by model) 3. Ice Cube Tray (not on all models) 12. Bottom Rollers (located front and rear, not shown) 4. Utility Shelf/Ice Cube Tray Holder (not on all models) 13. Refrigerator Door Shelves (type and quantity varies by model) 5. Refrigerator Light 14.
English Installing Your Refrigerator Unpacking Your Refrigerator 1. Remove all packaging material. This includes the foam base and all adhesive tape holding the refrigerator accessories inside and outside. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the refrigerator. Adjusting Your Refrigerator Leveling Your Refrigerator: • Your refrigerator has two leveling legs which are located in the front corners of your refrigerator. After properly placing yo
English Electrical Requirement • Make sure there is a suitable power Outlet (115 volts, 15 amps outlet) with proper grounding to power the refrigerator. • Avoid the use of three plug adapters or cutting off the third grounding in order to accommodate a two plug outlet. This is a dangerous practice since it provides no effective grounding for the refrigerator and may result in shock hazard. Use of Extension Cords • Avoid the use of an extension cord because of potential safety hazards under cert
English Door Handle Installation (handle style varies by model) Handle installation of freezer door: 1. Take out door handle, screws and screw covers from refrigerator accessory bag. 2. Align the lower part of door handle with the screw hole of the lower edge of freezer door, and fix them by screws. 3. Align the upper screw holes of the door handle with the holes in the freezer door, fix them with screws, and cover them with screw covers. (NOTE: Insert the inner screw Screw cover first and then
English Door Alignment (see fig. # 3) 1. Remove hinge cover screw. 2. Remove the top hinge cover. 3. Loosen the top hinge screws using a phillips head screwdriver. 4. Adjust the door or put a spacer in between and then tighten the screws. 5. Replace the top hinge cover. Reversing the Door Swing Note: Door reversal not available on stainless steel door models. Left/right door opening method: This product provides the reversing of the left/right door opening. You can select your preference of doo
English Dismantling: (see fig. # 4) 1. Fix refrigerator and freezer door by sticking adhesive tape on both sides to hold doors in place. 2. As shown in fig. 3, dismantle the hinge box cover on the upper part of freezer door with a phillips head screwdriver. Then remove the two screws from the hinge. Take out the hinge by pulling it vertically, and keep it in a safe place. 3. Remove the adhesive tape on freezer door, lift and take the door down, and carefully put it aside. 4. As shown in fig. 4,
English Reinstallation: (see fig. # 5 and # 6) 1. As shown in fig. 5, dismantle the lower hinge and plastic pad from right side and then install them on the left side. Bottom hinge axle Plastic pad Bottom hinge pad fig. # 5 Bottom hinge 2. Install refrigerator door: make the left bottom hole of the refrigerator compartment door fall over the lower hinge axle, move back and forward the door to make it straight and in alignment with central hinge. Install the central hinge again, turn the hinge ax
English Reversing the Door Handles Note: Not reversible on stainless steel door models. Freezer: (see fig. # 7a) 1. Remove screw cover from the handles. 2. Using a phillips head screwdriver, remove the inside screw and both the screws at the bottom of the freezer door that holds the handle. 3. Install the handle on the opposite side. 4. Remove screw plugs. 5. Install the screws and the screw cover on their corresponding position. Hole cover Hole cover Hole cover Hole cover fig. # 7a fig. # 7 Ref
English Refrigerator Features And Use (Note: If the refrigerator has General Features been placed in a horizontal or NOTE: All features not available on all tilted position for any period models of time wait 24 hours before plugging the unit in.) Adjustable temperature dial: Your refrigerator will automatically Refrigerator Section maintain the temperature level you Interior Light: select. The temperature control dial has Your refrigerator is equipped with an 7 settings plus off. 1 is the warm
English To replace a full width or half-width cantilevered shelf: (see fig. # 9) 1. Guide the rear shelf hooks into the desired slots in the metal shelf supports located on the back refrigerator wall. 2. Tilt up front of the shelf to set the shelf hooks in place. 3. Lower the front of the shelf into position until the rear hooks lock into the slots of the metal shelf supports. fig. # 9 Utility Drawer and Cover To remove the utility drawer: (see fig. # 10) 1. Slide utility drawer out until it rea
English To install utility drawer cover shelf: (see fig. #11) 1. Guide the rear shelf hooks into the desired slots in the metal shelf supports located on the back refrigerator wall. 2. Tilt up front of the shelf to set the shelf hooks in place. 3. Lower the front of the shelf into position until the rear hooks lock into the slots of the metal shelf supports. Replace the utility drawer. fig. # 11 Crisper and Crisper Cover To remove and install the crisper: (see fig. # 12) 1. Slide crisper straig
English To remove the crisper cover: (see fig. # 13) 1. First remove both crispers (see page 14 ). 2. Gently push upward from the underside of the crisper cover to remove it from the crisper cover frame. 3. Carefully grasp the crisper cover and slide out to remove. 4. Lift crisper cover frame up and remove. fig. # 13 To replace the crisper cover: (see fig. # 13) 1. Insert the rear of the crisper cover frame into the support bracket the side walls of the refrigerator. 2. Lower the front of the cr
English • LOW setting allows moist air to exit the crisper for optimum storage of fruits and/or vegetables, which have skins. • HIGH setting retains moist air in the crisper for optimum storage of fresh, leafy vegetables. Low High High/Low fig. # 14 Settings Refrigerator Door Shelves Gallon door storage: (see fig. # 15) Your refrigerator may be equipped with gallon door storage shelves. This feature will allow for the storage of gallon size containers. To remove refrigerator door shelves: (se
English 2. Carefully push down on each end of the door shelf until it is locked in place in the refrigerator door brackets. upper door shelf fig. # 15 lower door shelf To adjust the door shelf bottle huggers: (see fig #16) 1. Grasp the hugger firmly and slide right or left until it is snug against the items stored on the shelf. shelf bottle hugger fig. # 16 Freezer Features Removing the full-width freezer shelf: (see fig. # 17) 1. Grasp the freezer shelf firmly and slide to the left as far as po
English fig. # 17 1 2 Remove freezer door shelves: (see fig #18) 1. Remove all items stored on the shelf. 2. Gently push up each side until the shelf is clear of the door shelf brackets and then remove. freezer door shelves fig. # 18 To install freezer door shelves: (see fig #18) 1. Align the ends of the shelves with the door shelf brackets. 2. Carefully push down on each end of the door shelf until it is locked in place in the freezer door brackets. Ice Storage Bin: (see fig # 19) The ice stora