Summary of the content on the page No. 1
( )
MZ360216EX KDC333RCAM4
( )
MZ360217EX KDC4033AM4
CD-RECEIVER
INSTRUCTION MANUAL
© B64-3677-00/00 (MW)
Summary of the content on the page No. 2
Contents Safety precautions 3 Menu system 16 Menu System Notes 4 Security Code Touch Sensor Tone About CDs 5 Manual Clock Adjustment DSI (Disabled System Indicator) About MP3 and WMA 6 Supreme Setting CRSC (Clean Reception System Circuit) General features 7 Auxiliary Input Display Setting Power Text Scroll Selecting the Source CD Read Setting Volume Basic Operations of remote control 20 Attenuator System Q Accessories/ Installation Procedure 22 Audio Control Audio Setup Connecting Wires to Termi
Summary of the content on the page No. 3
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the Kenwood disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Mounting and wiring this product req
Summary of the content on the page No. 4
Notes • If you experience problems during installation, About DAB Tuner control consult your Kenwood dealer. (KDC-MP4533/MP4033/MP4033S) • When you purchase optional accessories, check Refer to A group on the Instruction manual of DAB with your Kenwood dealer to make sure that they Tuner KTC-9090DAB (optional accessory) for the work with your model and in your area. control method of DAB Tuner function. • If the unit fails to operate properly, press the Reset However, the following control
Summary of the content on the page No. 5
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be u
Summary of the content on the page No. 6
About MP3 and WMA The playable MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not conforming File/Folder name: 64 (Joliet: 32) characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property: 30 file and folder names may not display correctly. characters Playable Audio file • MP3, WMA • File/Folder name is the number of the characters inclu
Summary of the content on the page No. 7
General features Release button Control knob LOUD indicator ATT indicator Clock display Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the button, the Attenuat
Summary of the content on the page No. 8
General features System Q Adjustment Item Display Range Bass level "BAS L" –8 — +8 Selecting the best sound setting preset for Middle level "MID L" –8 — +8 different types of music. Treble level "TRE L" –8 — +8 Balance "BAL" Left 15 — Right 15 1 Select the source to set Fader "FAD" Rear 15 — Front 15 Press the [SRC] button. Exit Audio Control mode (Volume control mode) 2 Select the Sound type Press the [Q] button. 5 Exit Audio Control mode When you press the button once, the current Press an
Summary of the content on the page No. 9
In Audio file source Speaker Setting Information Display Fine-tuning so that the System Q value is optimal Song title & Artist name "TITLE"* when setting the speaker type. Album name & Artist name "ALBUM"* 1 Enter Standby Folder name "FOLDER" Press the [SRC] button. File name "FILE" Select the "STANDBY" display. Play time & Track number "P-TIME" Clock "CLOCK" 2 Enter Speaker Setting mode Press the [VOL] knob. In Standby/ Auxiliary input source 3 Select the Speaker type Information Display Turn
Summary of the content on the page No. 10
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in Press the Release button. "CALL" is displayed. The faceplate unlocks, allowing you to detach it. The audio system pauses. Listening to the audio during a call • The faceplate is a precision piece of equipment and Press the [SRC] button. can be damaged by sho
Summary of the content on the page No. 11
Tuner features Control knob ST indicator Band display Frequency display Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER" display. the table below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO 1" Automatic search for a st
Summary of the content on the page No. 12
Tuner features Station Preset Memory Frequency Step Setting Putting a station in the memory. Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM 1 Select the band band 9 kHz. Push the Control knob towards [FM] or [AM]. 1 Turn the power OFF 2 Select the frequency to put in the memory Press the [SRC] button for at least 1 second. Push the Control knob towards [4] or [¢]. 2 Switch the frequency step While pressing the [1] and [5] button, press 3 Put the frequency i
Summary of the content on the page No. 13
CD/Audio file/External disc control features Control knob Disc number IN indicator Track number Play time Function of the KDC-MP4533/KDC-MP4033/KDC- Playing CD & Audio file MP4033S Playing External Disc When a disc is inserted Press the [SRC] button. Playing discs set in the optional accessory disc Select the "CD" display. player connected to this unit. Press the [SRC] button. • When a CD is inserted, the "IN" indicator is ON. Select the display for the disc player you want. Display examples: P
Summary of the content on the page No. 14
CD/Audio file/External disc control features Function of the KDC-MP4533/KDC-MP4033/KDC- Fast Forwarding and Reversing MP4033S Function of disc changers with remote control Fast Forwarding Direct Disc Search Hold down toward [¢] with the Control knob. Doing Disc Search by entering the disc number. Release your finger to play the disc at that point. 1 Enter the disc number Reversing Press the number buttons on the remote Hold down toward [4] with the Control control. knob. 2 Do Disc Search Rele
Summary of the content on the page No. 15
Function of Audio file Scan Play Folder Select Playing the first part of each song on the disc or Audio file folder you are listening to and Quickly selecting the folder you want to hear. searching for the song you want to hear. 1 Enter Folder Select mode 1 Start Scan Play Press the [F.SEL] button. Press the [SCAN] button. "FOLD SEL" is displayed. "TRAC SCN"/"FILE SCN" is displayed. During Select mode the folder information is displayed as shown below. 2 Release it when the song you want to l
Summary of the content on the page No. 16
Menu system Control knob Menu display You can continue by returning to step 2 and Menu System setting other items. Setting beep sound during operation, etc. 4 Exit Menu mode functions. Press the [MENU] button. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation • When other items those applicable to the basic explanation. operation method above are displayed, their setting content chart is entered. (N
Summary of the content on the page No. 17
Function of the KDC-MP4533/KDC-MP4033/KDC- Resetting the Security Code function when MP4033S the audio unit is first used after removed In Standby mode from the battery power source or the Reset Security Code button is pressed Activating the Security Code disables the usage 1 Turn the power ON. of audio unit by someone else. Once the Security 2 Do the step 4 through 7 step operation, and Code is activated, the entry of authorized Security reenter the security code. Code is required to turn
Summary of the content on the page No. 18
Menu system In Standby mode In CD mode Manual Clock Adjustment Supreme Setting When MP3 or WMA files encoded at a low bit 1 Select Clock Adjustment mode rate (less than 96 kbps (fs=32k, 44.1k, 48kHz)) Push the Control knob towards [FM] or [AM]. are played, this function restores their high Select the "CLK ADJ" display. frequency region to approach the sound quality 2 Enter Clock Adjust mode of equivalents of these files encoded at a high bit Press the Control knob for at least 1 second. rat
Summary of the content on the page No. 19
Function of the KDC-MP4533/KDC-MP4033/KDC- Text Scroll MP4033S Setting the displayed text scroll. Auxiliary Input Display Setting Display Setting Selecting the display when alternating to "SCL AUTO" Repeats scroll. Auxiliary input source. "SCL MANU" Scrolls when the display changes. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX EXT" display. • The text scrolled is listed below. - CD text 2 Enter Menu mode - Folder name/ File name/ Song title/ Artist name/ Press t
Summary of the content on the page No. 20
Accessory of the KDC-MP4533/KDC-MP4033/KDC-MP4033S/KDC-MP333RC Basic Operations of remote control SRC VOL SRC ATT ATT VOL AUD 38 AUD 38 FM+ 4 ¢ 4/¢ AM– FM/AM/+/– DIRECT /OK Not used Not used ABC DEF GHI JKL MNO [0] — [9] PRS TUV WXY QZ Loading and Replacing the battery Basic operations Use two "AA"/ "R6"-size batteries. [VOL] buttons Slide the cover while pressing downwards to Adjusts the volume. remove it as illustrated. [SRC] button Insert the batteries with the + and – poles aligned Each ti
