Summary of the content on the page No. 1
®
Professional Disc Jockey Products
CDN-22S
PROFESSIONAL DUAL CD PLAYER
OPERATING MANUAL
©1999 Industries http://www.numark.com
Summary of the content on the page No. 2
CDN-22S Safety Information and Product Registration CAUTION 7. Ventilation - The appliance should be situated so that it’s location or position does not interfere with RISK OF ELECTRIC SHOCK DO NOT OPEN it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar CAUTION: TO REDUCE THE RISK OF ELECTRIC surface that may block the ventilation opening; or, SHOCK DO NOT REMOVE ANY COVER. NO USER- placed in a built- SERVICEABLE PARTS INSIDE. REFER SERVI
Summary of the content on the page No. 3
CDN-22S WARNING: To reduce the risk of fire or electrical shock, NOTICE CONCERNING FCC REGULATIONS do not expose this appliance to rain or moisture. This equipment generates and uses radio frequency Electrical equipment should NEVER be kept or stored in energy and may cause interference to radio and damp environments. television reception if you do not operate it in strict accordance with the procedures detailed in this DANGER: INVISIBLE LASER RADIATION WHEN OPERATING MANUAL. OPEN AND INTERLOCK
Summary of the content on the page No. 4
CDN-22S ® CDN-22S PROFESSIONAL DUAL-TRANSPORT CD PLAYER WITH REMOTE CONTROLLER CONGRATULATIONS... You have just purchased a dual CD player designed specifically for the professional DJ. This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the CDN-22 by reading the following information before attempting to operate the unit. Once again, congratulations and thank you for makin
Summary of the content on the page No. 5
CDN-22S TABLE OF CONTENTS Safety and Registration 2 Introduction 4 Set-up Instructions & Connections 7 Description of the Features Remote Control Unit 8 Display 9 Transport 9 Basic Operation Play, Pause and Cue Operations 10 Matching the Tempo 11 Beat Matching Using Pitch Bend 11 Relay and Fader Start 12 Example of Mixing 13 Before Switching off the Power 14 Troubleshooting Guide 14 Information and Specifications 15 Warranty 16 - The Leader in DJ Technology ©1999 Numark Industries - 5 - http://
Summary of the content on the page No. 6
CDN-22S CHECK TO BE SURE THE FOLLOWING ITEMS ARE IN THIS BOX: 1) DUAL-TRANSPORT PLAYER UNIT 1) REMOTE CONTROL UNIT 1) OWNERS MANUAL (THIS BOOKLET) 2) RCA CONNECTING CABLES 2) CONTROL CABLES 1) FADER START CABLE 1) IEC POWER CORD - The Leader in DJ Technology ©1999 Numark Industries - 6 - http://www.numark.com
Summary of the content on the page No. 7
CDN-22S CONNECTIONS Typical connection with a mixer is illustrated right. 1. Connect the output connection cords from the CD Player to the line inputs of your mixer. 2. Connect the remote control connection cable from the Unit 1 connector on the main unit to the Unit 1 connector on the remote control unit. Repeat for Unit 2. 3. The output connection cords and the remote control connection cables are supplied with the main unit. Be sure to use the remote control connection cables which have been
Summary of the content on the page No. 8
CDN-22S DESCRIPTION CDN-22S REMOTE FEATURES button is pressed (allowing “fall back”) and return to the 1. PROGRAM - Depress this button and the unit will original pitch when the button is released. By changing stop and the program indicator will light. Select the pitch of one disc with respect to the other in this each track to be programmed and press the way the beats can be matched. PROGRAM button between selections. You can program up to 30 tracks. Press PLAY to start the 10. SEARCH WHEEL
Summary of the content on the page No. 9
CDN-22S LCD DISPLAY FEATURES TRANSPORT FEATURES a) DISC TRAY- Place your CD in here. b) OPEN/CLOSE (Disc Tray Open/Close) - Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused. 1. PLAY - Active while the unit is actually playing a CD. c) POWER BUTTON - Turn on and turn off the 2. PAUSE - Active when the unit is paused. machine from this button. The unit should always be 3. CUE - Flashing when
Summary of the content on the page No. 10
CDN-22S DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS PLAY and CUE Pressing the “PLAY/PAUSE” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the disc was started. This is called the cue point. By alternately pressing the “PLAY/PAUSE” button and the “CUE” button, the disc may be returned and played from the cue point any number of times. This function is called back cue. PLAY, PAUSE and CUE EDITING CUE POINT When the inner search dial is turned
Summary of the content on the page No. 11
CDN-22S MATCHING THE BEATS PER MINUTE (BPM) Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the ( + ) side and match the tempo. When faster, move the pitch slider to the ( - ) side. The following description is for the case of matching the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1. Press PLAY
Summary of the content on the page No. 12
CDN-22S RELAY PLAY The cables required are commercially available 3.5mm (1/8”) mini-plug cables. One has already been included with your unit so the relay function could be used. 1. Connect auto start cable between both sides of the remote unit. 2. Insert CDs into both sides of the unit. 3. Hold down the time buttons for 1-2 seconds until the display indicates “auto” and the track number begins to flash. The track number will flash while the mode is active. Both sides must be active for relay
Summary of the content on the page No. 13
CDN-22S EXAMPLE OF MIXING USING BOTH PLAYERS OF YOUR CD PLAYER While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2. PLAYER 1 PLAYER 1 PLAYER 1 Load a disc in PLAYER 1 and select the track and press PLAY. Load a disc and press the Select the track to be Press the PLAY button OPEN/CLOSE button. played. PLAYER 2 PLAYER 2 PLAYER
Summary of the content on the page No. 14
CDN-22S BEFORE SWITCHING OFF THE POWER: When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power . DO NOT switch off the power when Switch off the power after the the disc holder is open. disc holder has been closed with the “OPEN/CLOSE” button TROUBLESHOOTING: Symptom Possible Cause Corrective Action The power fails to switch on Poor power plug connection at Insert the power plug firmly into when the POWER switc
Summary of the content on the page No. 15
CDN-22S SPECIFICATIONS TECHNICAL Quantization 16-bit linear/channel, 3 beam laser Oversampling rate 8 times Frequency response 20Hz-20KHz Channel separation 86dB T.H.D. + NOISE 0.01% S/N ratio (IHF-A) 94dB Output level 2.0Vrms Short access time (Play next track) less than 1.7sec Long access time (Track 1 ->Track 20) less than 3sec Start Time less than 0.3 sec Pitch control range +/-12% Pitch bend +/-16% Digital Output type 2, form 1, S/PDIF (Sony/Phillips Digital Interface Format) GENERAL
Summary of the content on the page No. 16
® Professional Disc Jockey Products LIMITED PRODUCT WARRANTY 1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years. The warranty is extended to (3) Years with the com
