Our goal is to provide you with a quick access to the content of the user manual for Maytag W10213164A. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Maytag W10213164A.
If looking through the Maytag W10213164A user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Maytag W10213164A but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Maytag W10213164A. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900.
In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.
You will need your model and serial number, located on the inside wall of the refrigerator compartment.
Para obtener acceso a “Instrucciones p
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions: ■ Plug into a grounded 3 prong outlet. ■ Use nonflammable cleaner. ■ Do not remove ground prong. ■ Keep flammable materials and vapors, such as gasoline, away from refrigerator. ■ Do not use an adapter. ■ Use two or more people to move and install refrigerator. ■ Do not use an extension cord. ■ Disconnect power before installing ice maker (
Location Requirements Electrical Requirements WARNING WARNING Explosion Hazard Electrical Shock Hazard Keep flammable materials and vapors, such as Plug into a grounded 3 prong outlet. gasoline, away from refrigerator. Do not remove ground prong. Failure to do so can result in death, explosion, or fire. Do not use an adapter. Do not use an extension cord. To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your Failur
Water Pressure A cold water supply with water pressure of between 30 and If the water pressure to the reverse osmosis system is less than 120 psi (207 and 827 kPa) is required to operate the water 40 to 60 psi (276 to 414 kPa): dispenser and ice maker. If you have questions about your water ■ Check to see whether the sediment filter in the reverse pressure, call a licensed, qualified plumber. osmosis system is blocked. Replace the filter if necessary. Reverse Osmosis Water Supply ■ Allow the
2. Flush the water system. See “Prepare the Water System” or NOTE: Tighten the nut by hand. Then tighten it with a wrench “Water and Ice Dispensers.” two more turns. Do not overtighten. NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container. REFRIGERATOR USE A B C D E F G Using the Controls A. Refrigerator water tubing E. Ferrule (purchased) For your convenience, your refrigerator controls are preset at the B. Nut (provided) F. Nut (purchased
■ Slide the door chill control to the left to reduce the flow of Disabling Sounds cold air to the bin and make it less cold. ■ Slide the door chill control to the right to increase the flow of ■ To turn off all dispenser and control sounds, press and hold cold air to the bin and make it colder. ICE and FILTER at the same time for 3 seconds. ■ To turn all sounds back on, press and hold ICE and FILTER at Water and Ice Dispensers the same time for 3 seconds again. (on some models) NOTE: On som
For crushed ice, cubes are crushed before being dispensed. This The display screen indicates when the dispenser is locked. may cause a slight delay when dispensing crushed ice. Noise from the ice crusher is normal, and pieces of ice may vary in size. When changing from crushed to cubed, a few ounces of crushed ice will be dispensed along with the first cubes. LOCKED UNLOCKED To Dispense Ice: 1. Press the button to select the desired type of ice. Ice Maker and Storage Bin (on some models) WAR
Removing and Replacing Ice Storage Bin Changing the Water Filter Style 1 1. Press the eject button to release the filter from the base grille. 1. Pull the covering panel up from the bottom and then slide it 2. Pull the filter straight out. back toward the rear. 3. Turn the cap counterclockwise to remove it from the filter. 2. Lift the wire shutoff arm so it clicks into the OFF (up) position. IMPORTANT: Do not discard the cap. It is part of your 3. Lift up the front of the storage bin and pull
4. On some models, wash glass door panels with a clean ■ Replace the base grille when finished. sponge or soft cloth and a mild detergent in warm water. 6. Plug in refrigerator or reconnect power. NOTES: ■ Do not hit the glass with pots, pans, furniture, toys, or Changing the Light Bulbs other objects. Scratching, hitting, jarring or stressing the NOTE: Not all bulbs will fit your refrigerator. Be sure to replace glass may weaken its structure, causing an increased the bulb with one of the s
The doors are difficult to open Ice and Water The ice maker is not producing ice or not enough ice WARNING ■ Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open. ■ Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line. ■ Ice maker turned on? Make sure wire shutoff arm or switch Explosion Hazard (depending on model) is in the ON positi
■ Is the water pressure at least 30 psi (207 kPa)? The water The ice dispenser will not operate properly pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.” ■ Freezer door closed completely? Close the door firmly. If it ■ Kink in the home water source line? Straighten the water does not close completely, see “The doors will not close source line. completely.” ■ New installation? Flush and fill the water system. ■ Ice bin installed correctly? Be su
WATER FILTER CERTIFICATIONS 12
PERFORMANCE DATA SHEETS Base Grille Water Filtration System Model T2WG2L/T2RFWG2 Capacity 200 Gallons (757 Liters) Model T2WG2/T2RFWG2 Capacity 200 Gallons (757 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class II*; and against NSF/ANSI Standard 53 for the reduction of Mercury, Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran. This system has been tested according to NSF/ANSI Standards 42
Base Grille Water Filtration System Model T1WG2L/T2RFWG2 Capacity 200 Gallons (757 Liters) Model T1WG2/T2RFWG2 Capacity 200 Gallons (757 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class II*; and against NSF/ANSI Standard 53 for the reduction of Mercury, Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran. This system has been tested according to NSF/ANSI Standards 42 and 53 for the reductio
Base Grille Water Filtration System Model P2WG2L/P2RFWG2 Capacity 200 Gallons (757 Liters) Model P2WG2/P2RFWG2 Capacity 200 Gallons (757 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class I*; and against NSF/ANSI Standard 53 for the reduction of Lead, Mercury, Benzene, Toxaphene, and O-dichlorobenzene. This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of th
Base Grille Water Filtration System Model P1WG2L/P2RFWG2 Capacity 200 Gallons (757 Liters) Model P1WG2/P2RFWG2 Capacity 200 Gallons (757 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class I*; and against NSF/ANSI Standard 53 for the reduction of Lead, Mercury, Benzene, Toxaphene, and O-dichlorobenzene. This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of th
® MAYTAG MAJOR APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Maytag brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Maytag”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Maytag designated
INSTRUCTIONS D'UTILISATION DU RÉFRIGÉRATEUR Nous vous REMERCIONS d'avoir acheté ce produit de haute qualité. Si vous rencontrez un problème non mentionné dans la section DÉPANNAGE, veuillez visiter notre site Web www.maytag.com pour des informations supplémentaires. Si vous avez toujours besoin d'assistance, veuillez nous téléphoner au 1-800-688-9900. Au Canada, visitez notre site Web www.maytag.ca ou téléphonez-nous au 1-800-807-6777. Vous aurez besoin de vos numéros de modèle et de série
Avant de jeter votre vieux réfrigérateur ou congélateur : Mise au rebut de votre vieux réfrigérateur ■ Enlever les portes. ■ Laisser les tablettes en place de sorte que les enfants ne AVERTISSEMENT puissent pas y pénétrer facilement. Risque de suffoquer Enlever les portes de votre vieux réfrigérateur. Le non-respect de cette instruction peut causer un décès ou des lésions cérébrales. IMPORTANT : L'emprisonnement et l'étouffement des enfants ne sont pas un problème du passé. Les réfrigérateurs
|4||Maytag Bottom Freezer Refrigerator AFD2535DEW||Refrigerator||27|
|5||Maytag Bottom Freezer Refrigerator ARB2257CSL||Refrigerator||10|