Summary of the content on the page No. 1
RF263TE****
RF263BE****
Refrigerator
user manual
English
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service or accessory parts,
please register your product at or contact
www.samsung.com/register
1-800-SAMSUNG (726-7864)
Free Standing Appliance
DA68-02601A(EN+FR+ES)-0.2.indb 1 2012.3.31 9:49:28 AM
Summary of the content on the page No. 2
safety information SAFETY INFORMATION Call the contact center for help. Before operating the appliance, please read this Note. manual thoroughly and retain it for your reference. Use this appliance only for its intended purpose as described in this instruction manual. These warning signs are here to prevent This appliance is not intended for use by persons injury to you and others. (including children) with reduced physical, sensory Please follow them carefully. or mental capabilities, or
Summary of the content on the page No. 3
• This appliance should be positioned in such a • The appliance must be positioned so that the way that it is accessible to the power plug. plug is accessible after installation. - Failing to do so may result in an electric shock • You need to remove all the protective plastic or fi re due to electric leakage. fi lm before you initially plug the product in. • Keep ventilation opening in the appliance enclosure or mounting structure clear of • The refrigerator must be safely obstruction. grou
Summary of the content on the page No. 4
- Never plug the power cord into a socket that is injury may occur. not grounded correctly and make sure that it is • Do not let children go inside the refrigerator. in accordance with local and national codes. Children could become trapped. • Plug the power plug into the wall socket fi rmly. • Do not insert your hands into the bottom area Do not use a damaged power plug, damaged under the appliance. power cord or loose wall socket. - Any sharp edges may cause personal injury. - This may res
Summary of the content on the page No. 5
with the product. - The container may freeze and break, and this may result in injury. Never stare directly at the UV LED lamp for d) Please observe maximum storage times and long periods of time. expiry dates of frozen goods. -This may result in eye strain due to the e) There is no need to disconnect the refrigerator ultraviolet rays. from the power supply if you will be away for less than three weeks. But, Remove all the Do not disassemble or repair the food if you are going away f
Summary of the content on the page No. 6
is required. If you have a long vacation the refrigerator to remove bad odors. or business trip and won’t use water or ice -This may result in an electric shock or fi re. dispensers, close the water valve. -Otherwise, water leakage may occur. Remove any foreign matter or dust from Wipe excess moisture from the inside and the power plug pins. Do not use a wet leave the doors open. or damp cloth when cleaning the plug. -Otherwise, odor and mold may develop. -Otherwise, there is a risk o
Summary of the content on the page No. 7
door/door seals and door latch so that small children or animals cannot become trapped inside. Children should be supervised to ensure that they do not play with the appliance. Cyclopentane is used in the insulation. The gases in the insulation material require a special disposal procedure. Please contact your local authorities in regard to the environmentally safe disposal of this product. Ensure that none of the pipes on the back of the refrigerator are damaged prior to disposal. Wh
Summary of the content on the page No. 8
Setting up your French Door Refrigerator The following chart details the exact height and GETTING READY TO INSTALL depth of this Samsung French Door Refrigerator. THE REFRIGERATOR RF263T** / RF263B** / RF263N** Model RF261B**/ RF260B** Congratulations on your purchase of this Samsung Depth “A” 33 27/32” (860mm) French Door Refrigerator. We hope you enjoy the state-of-art features and Width “B” 35 25/32” (909mm) Height “C” 68 3/8” (1737mm) Selecting the best location for the Overall Height
Summary of the content on the page No. 9
01 SETTING UP FLOORING REMOVING THE For proper installation, you must place this REFRIGERATOR DOORS refrigerator on a level, hard surface that is the same height as the rest of the floor. This surface For some installations you need to remove the should be strong enough to support a fully loaded fridge and freezer drawers so you can move the refrigerator to its final location. Do not remove refrigerator, or approximately 335lbs (152kg). To protect the finish of the flooring, cut a large the d
Summary of the content on the page No. 10
1 3 2 3 Fix the handles to the doors by sliding them left side firmly. 4 Fix the handles to the doors by sliding them down firmly. 5 4 5 Tilt up the Handle bar and tighten with wrench Tighten with wrench fi firmly. Drawer door handle assembly Disassemble the refrigerator doors Be careful not to drop and scratch the Check the direction of Handle WARNING doors while removing them. assembly. With the door opened 1. Remove 3 screws holding down the TOP TABLE ( 1 ) and turn it with wires connect
Summary of the content on the page No. 11
01 SETTING UP 2. 2 Disconnect two connectors ( ) on the left side REATTACHING THE door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove REFRIGERATOR DOORS the water line ( 3 ) while pressing the marked To reattach the fridge doors after you have moved part ( 4 ) of the water line coupler. the fridge to its final location, assemble the parts in reverse order. If a red clip is on the coupler, it must be 1. The Water Line must be fully Inserted to the C
Summary of the content on the page No. 12
4. Holding the top of the Freezer Drawer, pull it out How to adjust the level all the way and then remove it from the rail system. 1. Open the freezer drawer and remove the lower basket. 2. Insert a flat-blade screwdriver (-) into a notch on the left control lever, and turn it counter clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) Be careful not to scratch or dent the sliding CAUTION Make sure that you mount
Summary of the content on the page No. 13
01 SETTING UP 1. 1 Pull out the freezer drawer ( ) to reveal After you have connected the water line, make ). the lower hinge ( 2 sure the water storage tank inside the refrigerator 2. 3 Insert the supplied allen wrench (3/16”) ( ) is properly filled. To do this, press the water into the shaft ( 4 ) of the lower hinge. dispenser lever until the water runs from the water 3. Adjust the height by turning the outlet. DOWN hex wrench ( 3 ) clockwise ( ) or counter UP Water line installation k
Summary of the content on the page No. 14
Only connect the water line to a drinkable water source. If you have to repair or disassemble the water line, get a snug, leak-free connection. Refrigerator You can test the water line quickly using a paper cup.Under normal conditions, the water Plastic Tubing Compression (Assembled) Nut (1/4”) 10 seconds. Compression (Assembled) Fitting (Assembled) COMPLETING THE SET UP Now that you have your new refrigerator installed Molded Ferrule in place, you are ready to set up and enjoy the
Summary of the content on the page No. 15
01 SETTING UP Do not store food which goes bad easily at low temperature, such as bananas, melons. Your appliance is frost free, which means there is no need to manually defrost your appliance, as this will be carried out automatically. Temperature rise during defrosting can comply with ISO requirements. But If you want to prevent an undue rise in the temperature of the frozen food while defrosting the appliance, please wrap the frozen food up in several layers of newspaper. Any increase
Summary of the content on the page No. 16
Operating your French Door Refrigerator USING THE CONTROL PANEL ( 4 ) Alarm Hold 3 sec for If the door alarm is set to On, an alarm Lighting beeps if any refrigerator door is left open for more than three minutes. The beeping 8 stops when you close the door. The door alarm function is preset to On int the factory 4 1 releasing this button. You can turn it back 5 2 back on in the same fashion. The icon lights up when the function is on. If you touch and hold the Alarm/Lighting 3 6 button
Summary of the content on the page No. 17
02 OPERATING ( 8 ) Filter Water filter usage This icon will light up when you need to 2 change the filter. After you use about 300 gallons of water, the filter indicator lights up. (about 6 months). After you install the new water filter, reset the filter 1 indicator by touching the Ice Type Water/ Hold 3 sec for Filter Reset button. If water is not dispensing or To change the water filter more easily, dispensing slowly, you need to replace the water filter because Sometimes, it is hard t
Summary of the content on the page No. 18
The basic temperature and recommended Removing any residual matter inside temperatures of the Freezer and Refrigerator the water supply line after installing Compartments are 0°F and 37°F(or -18°C and the water filter. 3°C) respectively. If the temperature of the Freezer 1. Turn ON the main water and Refrigerator Compartments are too high or supply and supply water low, adjust the temperature manually. to the refrigerator. 2. Select water in the button Controlling the Freezer “ICE TYPE
Summary of the content on the page No. 19
02 OPERATING Fridge button to set your desired temperature. Using the ice Dispenser After a few seconds, the Fridge will begin Place a glass underneath the ice adjusting towards the newly set temperature. This dispenser and push gently against the will be reflected in the digital display. dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out. Please wait 2 seconds before removing the CAUTION glass under the dispenser to pre
Summary of the content on the page No. 20
C Check the Ch Ch h h h h h h h h he e e e e e e e ec e e e ec ck ck wat water level wa wa wa wa wa w w w w w w w wat at at at at at at at at at a a a a a a a a a a a at t t t t te te er e er r r r Botón Test (Probar) remove all ice cube tray. If not using the ice dispenser, it is possible to stack the cubes. Hold down the button. Remove the tank in the direction of the arrow. Dispose of ice cubes or ice mass. Push the bottom of the tray until it clicks. and try again. To remove the ice cu
