Summary of the content on the page No. 1
CD9909
Stereo CD Radio
Cassette Recorder
Please read this manual before use
ROBERTS
Sound for Generations
Summary of the content on the page No. 2
4 6 8 10 12 13 15 16 1. Tone control Controls (on rear) 2. Headphone socket 7 9 11 17 14 5 3. Tape/Radio/CD Function 3 switch 2 4. Microphone socket 5. Volume control 6. Telescopic aerial 1 7. CD lid 8. CD repeat button 9. CD stop button 10. CD play/pause button 11. CD mix button 12. CD track F Skip and B Skip buttons 13. CD compartment open button 14. FM stereo indicator 15. Waveband switch 16. Tuning scale 17. Tuning control 18. Liquid crystal display 19. Stop/eject button 20. Fast forward but
Summary of the content on the page No. 3
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN. General Batteries Do not allow this unit to be exposed to water or steam. Do not leave the unit where excessive heat could cause damage. It is recommended that the FM Remove the battery cover on the rear of the unit by pushing the catches in the band be used wherever possible as better results in terms of quality and direction of the arrows. Insert eight IEC size LR20 batteries (D size) into the freedom from interference will usually be obtained tha
Summary of the content on the page No. 4
Aerials The telescopic aerial (6) located on the rear of your CD radio cassette is for FM reception. The telescopic aerial should be fully extended and angled for optimum reception There is a built in ferrite aerial for MW and LW stations. Rotate your CD radio cassette to the position giving best reception. Radio operation (FM) Slide the Tape/Radio/CD switch (3) to the "Radio" position. Slide the waveband switch (15) to the “FM position”. Adjust the volume control (5) until a hissing sound is he
Summary of the content on the page No. 5
CD operation Playing a disc Press the open button (13) to open the CD compartment. Carefully place a disc onto the spindle in the CD compartment, ensuring that the label is facing upwards. Close the lid ensuring it latches shut. Slide the Tape/Radio/CD switch (3) to the "CD" position. The Liquid crystal display (18) will light up if the unit is connected to the mains supply. Press the CD play/pause button (10) to play the disc. Adjust the volume control (5) and tone control (1) to the required s
Summary of the content on the page No. 6
Mixed play When mixed play is selected your CD radio cassette will play all the tracks on the disc in random order. Press the mix button (11) until the word ‘Mix’ appears in the display. All tracks on the disc will be played in a random order. Listening to cassette tapes Slide the Tape/Radio/CD switch (3) to the "Tape" position. Press the stop/ eject button (19) to open the cassette door (24). Insert a pre-recorded cassette with the tape surface nearest to the cassette keys and the side with the
Summary of the content on the page No. 7
Recording from CD Press the open button (13) to open the CD compartment. Carefully place a disc onto the spindle in the CD compartment, ensuring that the label is facing upwards. Close the lid ensuring it latches shut. Slide the Tape/Radio/CD switch (3) to the "CD" position. Insert a blank cassette with the tape surface nearest to the cassette keys. Select the required track using the F Skip or B Skip buttons (12). Press the record button (23) followed by the CD play/ pause button (10) to commen
Summary of the content on the page No. 8
Preventing accidental erasure To safeguard your recordings against accidental erasure, break off the appropriate tab on the cassette as shown . There is one tab for each side of the cassette. This will prevent the Record button from being pressed. To restore the cassette to normal, seal the tab openings with a small piece of self-adhesive tape. Safety tab side A Safety tab side B A Cleaning the Heads The binder and oxide from magnetic tapes can accumulate on the pinch roller (A) the capstan shaf
Summary of the content on the page No. 9
Product Care Do not expose your CD radio cassette to extremes of temperature. The product should be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean cloth. Use a damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use strong detergents or spray cleaners, abrasive powders, thinners or solvents on the machine, as these may cause damage the finish. CD Player Maintenance The player mechanism is fitted with self
Summary of the content on the page No. 10
Disc player Specifications Laser wavelength 780nM Power Requirements Laser power 5mW max Mains AC 230 volts, 50Hz only Frequency response 20Hz-20kHz Batteries 8 x LR20 (D size) (battery life approx. 25 hours) Radio Frequency Coverage General FM 87.5 -108MHz Output Power 2 x 2W RMS MW 530 - 1605kHz Loudspeakers 2 x 100mm dia 4ohms LW 148 - 284kHz Headphone socket 3.5mm stereo Aerial System FM Telescopic aerial MW Built-in Ferrite aerial LW Built-in Ferrite aerial Imported by:- ROBERTS RADIO LIMI
Summary of the content on the page No. 11
Notes: If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri)
Summary of the content on the page No. 12
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge. The guarantee does not cover: 1. Damage resulting from incorrect use. 2. Consequential damage. 3. Receivers with removed or defaced serial numbers. N.B. Damaged or broken telesco
