Our goal is to provide you with a quick access to the content of the user manual for Zanussi ZBB 7294. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Zanussi ZBB 7294.
If looking through the Zanussi ZBB 7294 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Zanussi ZBB 7294 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Zanussi ZBB 7294. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety.You MUST read it care
Disposal of old Appliances At the end of the Appliance Life The symbol on the product or on its packaging indicates that this product may not be treated as When disposing of your appliance, use an household waste. Instead it shall be handed over to authorised disposal site. the applicable collection point for the recycling of Remove the plug and ensure that any locks or electrical and electronic equipment. By ensuring this catches are removed, to prevent young children product is disposed of
OPERATION Pay careful attention not to exceed load limit Before using stated on the side of the upper section (where Remove all securing tapes. Wash inside the applicable). appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Caution Do not use soap or detergent as the smell may linger. Dry thoroughly. In the event of a power cut do not open the door. The food in the freezer will not be affected if the power Setting the temperature cut is short and if the freezer i
Thawing Fresh food refrigeration Frozen food, prior to being used, can be thawed in To obtain the best performance, do not store warm the fridge or at room temperature depending on the food or evaporating liquids in the refrigerator; do time available. Small food items may even be cooked cover or wrap the food, particularly if it has a strong from frozen; in this case cooking will take longer. flavour. Any frozen food which is allowed to thaw accidentally Do not cover the shelves with any protec
Movable shelves The walls of the refrigerator have runners so that the shelves can be positioned as desired . For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be adjusted in height. To do this proceed as shown in the diagram. The top shelf can be removed for easier cleaning. Freezing Calendar The symbols show different types of frozen goods. The numbers indicate
HINTS AND TIPS Food Storage In the Event of a Power Failure To obtain the best results from your appliance, If there is a power failure during the storage of frozen neither hot foods nor liquids which may foods, keep the door closed. If the temperature within evaporate, should be placed in the larder your freezer should rise do not refreeze the food compartment. without checking it’s condition. Keep the time between buying chilled food and The following guidelines should assist you. placing
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried Changing the light bulb out, DISCONNECT the appliance from the ELECTRICITY supply. Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply, then replace the bulb as follows; Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHL
Remember to wash the defrost cleaner in hot soapy water at regular intervals. Dry throughly before replacing. Freezer When the frost has reached a thickness of up to 4mm it can be removed using the ice scraper provided with the appliance. During this operation it is not necessary to disconnect the appliance from the mains and remove the food. Never use metal tools for this operation. For complete defrosting (once or twice a year) proceed as follows: - turn the thermostat control knob to the «OFF
SOMETHING NOT WORKING Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Service Force Centre, check the following points: Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown. The light does not come on Ensure t
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been u
TECHNICAL SPECIFICATIONS POWER SUPPLY VOLTAGE AND FREQUENCY 230-240 V / 50 Hz TOTAL POWER ABSORBED 120 W AVERAGE DAILY UNITS ELECTRICITY * 0.87 kWh GROSS CAPACITY Fridge 214 l Freezer 76 l NET CAPACITY Fridge 210 l Freezer 70 l STAR RATING * This figure is based on standard test results in accordance with European Standard EN 153. Actual consumption will depend on how the appliance is used and where it is located. 13
INSTALLATION Important Warning IF YOU ARE DISCARDING AN OLD APPLIANCE It must be possible to disconnect the appliance from THAT HAS A LOCK OR CATCH ON THE DOOR, the mains power supply; the plug must therefore be YOU MUST ENSURE THAT IT IS MADE easily accessible after installation. UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions under
For replacement, use a 13amp BSI362 fuse. Only ASTA or BSI approved fuses should be used. Electrical connections The plug must not be used if the fuse cover/carrier is Any electrical work required to install this appliance lost. The cover/carrier is indicated by the coloured should be carried out by a qualified electrician or insert at the base of the plug. competent person. A replacement cover/carrier must be obtained from WARNING:THIS APPLIANCE MUST BE your local Zanussi Service Force Centre.
Instructions for totally built-in appliances Door reversal The appliance is supplied with the right or left door opening.To change the opening direction of the door proceed as in the following instructions before installing it. 1. Unscrew the upper pin and remove the spacer. 2. Remove the upper pin and the upper door. 3. Unscrew the middle hinge. 4. Remove the lower door. 5. Unscrew the lower pin and refit it on the opposite side 6. Refit the lower door. 7. Rescrew the middle hinge und the
Make sure that a distance of 44 mm is maintained in the lower part between the kitchen furniture and the border of the appliance. The lower hinge cover inserted in the accessories 1 bag, is useful to guarantee the exact position of the kitchen furniture and the appliance. Also make sure that the appliance does not clamp 2 the mains cable Fasten the appliance with 4 screws provided in the kit included with the appliance. (I = short) (P = long) I P Apply the sealing strip pushing it between the re
Separate parts Ha, Hb, Hc, Hd as shown in the figure. Place guide (Ha) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied. Fix cover (Hc) on guide (Ha) until it clips into place Open the appliance door and the furniture door at 90°. Insert the small square (Hb) into guide (Ha). Put together t
Place the small square on the guide again and fix it with the screws supplied. Should the lining up of the furniture door be necessary, use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly. Fix cover (Hd) on guide (Hb) until it clips into place. If the appliance is to be fitted laterally to the kitchen unit, it will be sufficient to loosen the screws of the little plates (D), move them as shown in Fig.
© Electrolux plc 2007