Our goal is to provide you with a quick access to the content of the user manual for Zanussi ZBB6284. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Zanussi ZBB6284.
If looking through the Zanussi ZBB6284 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Zanussi ZBB6284 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Zanussi ZBB6284. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
EN User manual
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Helpful hints and tips _ _ _ _ _ _
or damaged power plug may overheat and cause a Care and cleaning fire. • Before maintenance, switch off the appliance and dis- 3. Make sure that you can come to the mains plug of connect the mains plug from the mains socket. the appliance. • Do not clean the appliance with metal objects. 4. Do not pull the mains cable. • Do not use sharp objects to remove frost from the ap- 5. If the power plug socket is loose, do not insert the pliance. Use a plastic scraper. power plug. There is a risk of elec
Environment Protection insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations This appliance does not contain gasses which could to obtain from your local authorities. Avoid damaging the damage the ozone layer, in either its refrigerant cir- cooling unit, especially at the rear near the heat exchang- cuit or insulation materials. The appliance shall not be er. The materials used on this appliance marked by the discarded together with the
Important! In the event of accidental defrosting, for Positioning the door shelves example due to a power failure, if the power has been off To permit storage of food for longer that the value shown in the technical packages of various sizes, characteristics chart under "rising time", the defrosted the door shelves can be food must be consumed quickly or cooked immediately and then re-frozen (after cooling). placed at different heights. Thawing Deep-frozen or frozen food, prior to being used, ca
Fruit and vegetables: these should be thoroughly cleaned • lean foods store better and longer than fatty ones; salt and placed in the special drawer(s) provided. reduces the storage life of food; Butter and cheese: these should be placed in special air- • water ices, if consumed immediately after removal from tight containers or wrapped in aluminium foil or polythene the freezer compartment, can possibly cause the skin to bags to exclude as much air as possible. be freeze burnt; Milk bottles: th
Defrosting of the refrigerator 3. Leave the door open and insert the Frost is automatically eliminated from the evaporator of plastic scraper in the refrigerator compartment every time the motor com- the appropriate pressor stops, during normal use. The defrost water seating at the bot- drains out through a trough into a special container at the tom centre, placing back of the appliance, over the motor compressor, where a basin underneath it evaporates. to collect the de- It is important to peri
Problem Possible cause Solution The appliance does not operate. The appliance is switched off. Switch on the appliance. The lamp does not operate. The mains plug is not connected to the Connect the mains plug to the mains mains socket correctly. socket correctly. The appliance has no power. There is Connect a different electrical appliance no voltage in the mains socket. to the mains socket. Contact a qualified electrician. The lamp does not work. The lamp is in stand-by. Close and open the do
power and specifically designed for household appli- Replacing the lamp ances (the maximum power is shown on the lamp Caution! Disconnect the plug from the mains cover). socket. 4. Install the lamp cover. 1. Remove the screw 5. Tighten the screw to the lamp cover. from the lamp cov- 6. Connect the plug to the mains socket. er. 7. Open the door. Make sure that the light comes on. 2. Remove the lamp Closing the door cover (refer to the illustration). 1. Clean the door gaskets. 3. Replace the used
1. Connect the wire coloured green and yellow to the Warning! This appliance must be earthed. terminal marked either with the letter “E“ or by the The manufacturer declines any liability should these earth symbol or coloured green and yellow. safety measures not be observed. 2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 1 2 3. Connect the wire coloured brown to the terminal ei- ther marked with the “L“ or coloured red. 4. Check that no cu
Ventilation requirements Installing the appliance Caution! Make sure that the mains cable can move The airflow behind the ap- freely. min. 50 mm pliance must be sufficient. 2 200 cm Do the following steps: min. 2 200 cm x 2 I 4mm x 1 44mm I If necessary cut the adhe- Install the appliance in the Adjust the appliance in the Attach the appliance to the sive sealing strip and then niche. niche. niche with 4 screws. apply it to the appliance as Push the appliance in the Make sure that the distance s
Ha Hb G C D H E Hc E B Hd Remove the correct part Attach the covers (C, D) to Connect the appliance lat- Disconnect the parts (Ha), from the hinge cover (E). the lugs and the hinge erally to the kitchen furni- (Hb), (Hc) and (Hd). Make sure to remove the holes. ture sidewall: part DX, in the case of right Install the vent grille (B). 1. Loosen the screws of hinge, SX in opposite case. Attach the hinge covers (E) the part (G) and move to the hinge. the part (G) till the fur- niture sidewall. 2. T
Hb Hd Hb Place the small square on Press the part (Hd) on the the guide again and fix it part (Hb). with the screws supplied. Align the kitchen furniture door and the appliance door by adjusting the part Hb. Do a final check to make sure that: Important! If the ambient temperature is low (for example, in the Winter), the size of the gasket decreases. The size of • All screws are tightened. the gasket increases when the ambient temperature • The magnetic sealing strip is attached tightly to th