Our goal is to provide you with a quick access to the content of the user manual for Zanussi ZD 50/17 RAL. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Zanussi ZD 50/17 RAL.
If looking through the Zanussi ZD 50/17 RAL user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Zanussi ZD 50/17 RAL but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Zanussi ZD 50/17 RAL. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
ZD 50/17 R
ZD 50/17 RAL
IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety. You MUST read it car
CONTENTS Instructions for the user Instructions for the installer Important Safety Information 2 Technical specification 14 Description of the appliance 4 Installation 15 Operation 5 Positioning 15 Before use 5 Rear Spacers 15 Setting the temperature 5 Freezing fresh food 5 Electrical Connection 16 Storage of frozen food 5 Door Reversability 17 Thawing 6 Making ice cubes 6 Fresh food refrigeration 7 Movable shelves 7 8 Hints and Tips Maintenance and Cleaning 9 Internal cleaning 9 External cleani
9 3 6 DESCRIPTION OF THE APPLIANCE A B C D E N M F L I H G A- Ice trays B - Shelves for freezing fresh foods C - Freezer calender D- Frozen food storage E- Dairy compartment (for dairy products to prevent tainting) F- Can storage shelf G- Bottle storage shelf H- Salad crisper (to keep fruit and vegetables fresh) I- Glass shelf (for storing fresh meat) L- Drain channel M- Cooked foods storage shelves N- Thermostat control for both compartments 4 12
OPERATION that, in this condition the refrigerator compartment Before using temperature might drop below 0¡ C. Remove all securing tapes. Wash inside the If this occurs reset thermostat knob to a warmer appliance with lukewarm water and bicarbonate of setting. soda (5 ml to 0.5 litre of water). In any 24 hours you can freeze up to 3 kg. Do not use soap or detergent as the smell may Place the food to be frozen on the shelf of the linger. Dry thoroughly. freezer as this is the coldest part. Setti
Thawing Fresh food refrigeration To obtain the best performance, do not store warm Deep frozen or frozen food, prior to being used, can food or evaporating liquids in the refrigerator; do be thawed in the fridge or at room temperature cover or wrap the food, particularly if it has a strong depending on the time available. Small food items flavour. may even be cooked from frozen; in this case cooking will take longer. Do not cover the shelves with any protective material, such as paper, cardboard
Movable shelves The walls of the refrigerator have runners so that shelves can be positioned as desired. D040 The door shelves can be easily removed for cleaning D307 D058 7
HINTS AND TIPS Energy Saving Advice Normal Operating Sounds ¥ You may hear faint gurgling or bubbling sounds ¥ Do not install the appliance close to sources of when the refrigerant is pumped through the coils heat, such as a boiler or radiator. or tubing at the rear, to the cooling ¥ Locate the appliance in a cool well ventilated plate/evaporator. room and make sure that the air openings of the ¥ When the compressor is on, the refrigerant is appliance are not obstructed. being pumped round, and
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried Changing the light bulb out, DISCONNECT the appliance from the Should the interior light fail to work, first switch off ELECTRICITY supply. the appliance and disconnect from the electricity supply, then replace the bulb as follows; Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHL
Remember to wash the defrost cleaner in hot soapy water at regular intervals. Dry throughly before replacing. Freezer When the frost has reached a thickness of up to 4mm it can be removed using the ice scraper provided with the appliance. During this operation it is not necessary to disconnect the appliance from the mains and remove the food. Never use metal tools for this operation. For complete defrosting (once or twice a year) proceed as follows: - turn the thermostat dial to the ÇOFFÈ positi
SOMETHING NOT WORKING Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Service Force Centre, check the following points: Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown. The light does not come on Ensure t
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For further details please see the accompanying Customer Care Booklet. Before calling out an engineer, please ensure you have read the details under the heading ÔSomething Not Working? When y
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been u
TECHNICAL SPECIFICATIONS DIMENSIONS Height 120 cm Width 49.5 cm Depth 60 cm POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 150 W AVERAGE DAILY UNITS ELECTRICITY * 0.98 kWh GROSS CAPACITY Fridge 138 l Freezer 42 l NET CAPACITY Fridge 136 l Freezer 42 l * This figure is based on standard test results in accordance with European Standard EN 153. Actual consumption will depend on how the appliance is used and where it is located. 14
INSTALLATION Warning IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on ÒDoor reversal directionsÓ paragraph. Positioning This appliance is designed to operate in ambient temperatures between 10¡C (50¡F) and 32¡C (90¡F). It sh
For replacement, use a 13amp BSI362 fuse. Only ASTA or BSI approved fuses should be used. Electrical connections The plug must not be used if the fuse cover/carrier is Any electrical work required to install this appliance lost. The cover/carrier is indicated by the coloured should be carried out by a qualified electrician or insert at the base of the plug. competent person. A replacement cover/carrier must be obtained from WARNING: THIS APPLIANCE MUST BE your local Zanussi Service Force Centre
Door reversibility 1. Unplug the appliance from the power supply before carrying out the below-mentioned operations. G 2. Remove the feets (3). 3. Unscrew the bottom hinge (1). 4. Remove the freezer door by releasing it from the middle hinge (H). 5. Unscrew the middle hinge. 6. Remove the fridge door by releasing it from the top hinge pin (G). 7. Remove the pin (G) from the top hinge, then mount these on the opposite side. 3 8. Refit the fridge door, after having removed the plugs(I) which must