Our goal is to provide you with a quick access to the content of the user manual for Zanussi ZRB638FW. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Zanussi ZRB638FW.
If looking through the Zanussi ZRB638FW user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Zanussi ZRB638FW but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Zanussi ZRB638FW. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
User manual 2
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• It is dangerous to alter the specifications or modify this • Ice lollies can cause frost burns if consumed straight product in any way. Any damage to the cord may cause from the appliance. a short-circuit, fire and/or electric shock. Care and cleaning Warning! Any electrical component (power cord, • Before maintenance, switch off the appliance and dis- plug, compressor) must be replaced by a certified connect the mains plug from the mains socket. If you service agent or qualified service pers
• This product must be serviced by an authorized Service discarded together with the urban refuse and rubbish. The Centre, and only genuine spare parts must be used. insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations Environment Protection to obtain from your local authorities. Avoid damaging the This appliance does not contain gasses which could cooling unit, especially at the rear near the heat exchang- damage the ozone layer, in e
Thawing Removal of freezing baskets from the freezer Deep-frozen or frozen food, prior to being used, can be The freezing baskets have a limit stop to prevent their thawed in the refrigerator compartment or at room tem- accidental removal or falling out. At the time of its removal perature, depending on the time available for this opera- from the freezer, pull the basket towards yourself and, tion. upon reaching the end point, remove the basket by tilting Small pieces may even be cooked still fr
For safety, store in this way only one or two days at the • do not allow fresh, unfrozen food to touch food which most. is already frozen, thus avoiding a rise in temperature Cooked foods, cold dishes, etc..: these should be covered of the latter; and may be placed on any shelf. • lean foods store better and longer than fatty ones; salt Fruit and vegetables: these should be thoroughly cleaned reduces the storage life of food; and placed in the special drawer(s) provided. • water ices, if consume
Defrosting of the refrigerator Defrosting of the freezer Frost is automatically eliminated from the evaporator of The freezer compartment of this model, on the other hand, the refrigerator compartment every time the motor com- is a "no frost" type. This means that there is no buildup pressor stops, during normal use. The defrost water of frost when it is in operation, neither on the internal walls drains out through a trough into a special container at the nor on the foods. back of the appliance
Problem Possible cause Solution Water flows on the ground. The melting water outlet does not flow Attach the melting water outlet to the in the evaporative tray above the com- evaporative tray. pressor. There is too much frost and ice. Products are not wrapped properly. Wrap the products better. The door is not closed correctly. Refer to "Closing the door". The Temperature regulator may be set Set a higher temperature. incorrectly. The temperature in the appliance The Temperature regulator may
7. Connect the plug to the mains socket. 2. If necessary, adjust the door. Refer to "Installation". 8. Open the door. Make sure that the light comes on. 3. If necessary, replace the defective door gaskets. Con- tact the Service Force Center. Closing the door 1. Clean the door gaskets. Technical data ZRB632FW ZRB634FW ZRB638FW Dimension Height 1750 mm 1850 mm 2010 mm Width 595 mm 595 mm 595 mm Depth 632 mm 632 mm 632 mm Rising Time 16 h 18 h 18 h The technical information are situated in
socket is a serious safety (shock) hazard. Ensure that it is 1 2 disposed of safely. Rear spacers and levelling 2 1 3 3 4 5 In the bag with the docu- When placing the appli- mentation, there are two ance ensure that it stands spacers which must be fit- level. This can be achieved ted as shown in the figure. by two adjustable feet at Slacken the screws and in- the bottom in front. Important! The wires in the mains lead are coloured in sert the spacer under the accordance with the following code:
m1 m2 1 m5 m3 m4 • Open the doors. Un- • Unscrew the lower hinge • Remove the plugs (1) on • Unscrew the upper screw the middle hinge (b1) the upper side of both hinge pivot and place it (m2). Remove the plas- doors and move them to on the opposite side. • Remove the left-hand tic spacer (m1). the other side. cover pins (b4) and • Fit the upper door on the • Remove the doors. move to the other side. • Re-insert the lower door upper door pivot. on the lower hinge pivot • Remove the left-hand • Re
To buy accessories, consumables and spare parts at our online shop please visit: www.electrolux.co.uk www.electrolux.ie www.zanussi.com 210620128-02022009