Our goal is to provide you with a quick access to the content of the user manual for Haier Refrigerator HYC-580. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Haier Refrigerator HYC-580.
If looking through the Haier Refrigerator HYC-580 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Haier Refrigerator HYC-580 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Haier Refrigerator HYC-580. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Read the Operation Manual carefully before using your appliance.
Keep the Operation Manual in a safe place.
Appearance, color and layout of the door may vary.
Product Pharmaceutical refrigerator Model HYC-940 HYC-580 Volume 940L 580L External panel Sprayed steel sheet Internal panel Sprayed steel sheet Insulation Styrene polyurethane foam (Freon-free) Rack 6 6 Cooling Air circulation Compressor Sealed Condenser Finned pipes Evaporator Finned pipes Rrfrigerant R134a Defrosting Automatic Thermostat Electronic control system Over-temp warning Indicator blinks for buzzer and remote warning Low-temp warning Indicator blinks, without deferred buzzer alarm D
2~8 . 2~8 .
Control Light switch pannel Door lock Inner light Rack Casters HYC-940 Diagram
3 4.Rack There are 6 racks inside. 5.Inner light
8 10 min later 10 min
2~8 . 8 Temperature adjusting: Press and hold both SENSOR SELECT button and CALIB CANCEL button for more than 3s until original setting starts flashing to indicate that it enters temperature setting mode. With each press of CALIB CANCEL button, temperature setting increases 0.1 until reaching upper limit, which is defaulted as 8 . If press again, it returns to lower limit, which is defaulted as 2 . It repeats the above cycle. When it reaches your desired temperature, if you don't press the butto