Summary of the content on the page No. 1
ENGLISH FRANÇAIS ESPAÑOL
77-20LR55000000
Z
LP-R550USB
CD recorder with turntable/cassette player
OWNER’S MANUAL
MODE D’EMPLOI
MANUAL DEL USUARIO
Summary of the content on the page No. 2
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 3) Heed all warnings. NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 4) Follow all instructions. PERSONNEL. 5) Do not use this apparatus near water. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the 6) Clean only with dry cloth. presence o
Summary of the content on the page No. 3
ENGLISH < Do not expose this apparatus to drips or splashes. For U.S.A. This equipment has been tested and found to comply with < Do not place any objects filled with liquids, such as vases, on the the limits for a Class B digital device, pursuant to Part 15 of the apparatus. FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential < Do not install this apparatus in a confined space such as a book installation. This equipment gener
Summary of the content on the page No. 4
Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Using the Unit ............................................ 5 Handling Records ................................................ 5 How to Replace the Stylus ........................................ 6 Discs ............................................................ 6 Handling Cassette Tape .......................................... 8 Remote Control Unit ...........................
Summary of the content on the page No. 5
ENGLISH Before Using the Unit Handling Records What’s in the box Handling precautions Check to be sure the box includes all the supplied accessories < Do not touch the record’s grooves. Only handle records, by shown below. the edges or the label, with clean hands. Skin oils from even Please contact the store where you purchased this unit if any clean hands can leave a residue on the record surface that will of these accessories are missing or have been damaged during gradually deteriorate the
Summary of the content on the page No. 6
How to Replace the Stylus Discs The stylus should last about 50 hours under normal use. Please use CD, CD-R and CD-RW discs bearing the However, it is recommended that the stylus be replaced as soon as “DIGITALAUDIO” mark. you notice a change in sound quality. CD Prolonged use of a worn-out stylus may damage the record. Wear and tear on the stylus will be accelerated under frequent use of 78 RPM records because of its higher speed. CAUTION: CD-R CD-RW < Do not disassemble or bend the stylus. <
Summary of the content on the page No. 7
ENGLISH CAUTION: About CD-R and CD-RW discs < Do not play any disc that is warped, deformed or damaged. CD-R discs can be recorded once only. Once they have been used Playing such discs may cause irreparable harm to the playing for recording, they cannot be erased or re-recorded. mechanisms. However, if space is available on the disc (and the disc has not been finalized), additional material can be recorded. < Printable CD-R and CD-RW discs are not recommended, as the label side might be st
Summary of the content on the page No. 8
Handling Cassette Tape CAUTION: Tape types < Do not open a cassette or pull out the tape. There are several types of cassette tapes. < Do not touch the tape surface. < Do not use cassette tapes in areas with high temperatures and Automatic tape-type Metal (Type IV) detection holes humidity. Chrome (Type II) Normal (Type I) Storage precautions < Keep cassette tapes away from magnets or magnetized items because they may cause noise or erase recorded contents. < Do not leave cassette tapes
Summary of the content on the page No. 9
ENGLISH Remote Control Unit Turntable Cover Using the provided remote control unit, you can also operate the To attach the turntable cover unit. 1. Slide the hinges into the hinge sockets on the rear of the When operating the remote control unit, point it toward the remote turntable. sensor on the front panel of the unit. 2. Align the hinge sockets on the turntable cover with the top of the < Even if the remote control unit is operated within the effective hinges, and slide the cover down into
Summary of the content on the page No. 10
Connection A B C D White White Red White Red White LR R L LINE OUT LINE IN Cassette Tape Deck, etc. CAUTION: B AM loop antenna < Switch off the power to all equipment before making To stand the loop antenna on a surface, insert the tab into the connections. slot in the antenna base. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the A
Summary of the content on the page No. 11
ENGLISH Parts of the Turntable L K J Before use, detach the stylus guard (white plastic cover) by pulling it straight off the front of the cartridge in the direction of the arrow. A Turntable G Cassette tape operation button PLAY (y) B Transport locking screw Use this button to play a tape. Before use, completely loosen the screw by turning it clockwise with a coin or screwdriver. F.FWD (,) Use this button to fast-forward a tape. REW (m) Side view of transport locking screw Use this butt
Summary of the content on the page No. 12
Unit Functions and Remote Control A POWER Press this button to turn the unit on or off. B PHONO/TAPE/AUX, CD, FM/AM To play a record, select PHONO by pressing the PHONO/TAPE/ AUX button. To play a tape, select TAPE by pressing the PHONO/TAPE/AUX button. To listen to the external source connected to the AUX IN jack, select AUX by pressing the PHONO/TAPE/AUX button. To play a CD, press the CD button. To listen to the radio, press the FM/AM button. C MANUAL/AUTO REC, PRESET Use this button to se
Summary of the content on the page No. 13
ENGLISH Basic Operation H Skip/Search (.m/,/), TUNING ( ) In CD mode, use these buttons to skip tracks. Hold down these buttons to search for a part of a track. In FM/AM mode, use these buttons to tune in a station. I RECORD Use this button to enter record pause mode. J CD operation buttons PLAY/PAUSE (y/J) Use this button to start or pause playback or recording. STOP (H) Use this button to stop playback or recording. K Speakers (stereo) 1 Press the POWER button to turn the unit on. L OPEN/CL
Summary of the content on the page No. 14
Listening to the Radio FM MODE 1 Select FM or AM using the FM/AM button. FM MODE button Pressing this button alternates between STEREO mode and MONO mode. 2 Select the station you want to listen to. STEREO Auto selection FM stereo broadcasts are received in stereo and the “STEREO” indicator lights in the display. < If the sound is distorted and the “STEREO” indicator blinks, the signal is not strong enough for good stereo reception. In this case, change to MONO mode. Hold down the TUNING but
Summary of the content on the page No. 15
ENGLISH Preset Tuning You can store FM and AM stations into preset channels 1 to 9 How to select preset stations respectively. 1 Press the FM/AM button to select a band. 1 1 2 Tune in a station you want to listen to (see steps to of page 14). 2 Press the MEMORY button. 2 Press the PRESET button repeatedly until the desired preset station is found. “FM” and “MHz” or “AM” and “kHz” start blinking. < You can tune in another station even after the MEMORY button has been pressed. 3 Select a p
Summary of the content on the page No. 16
Listening to a Record adaptor transportation screw 4 Select the speed. < Before use, completely loosen the transportation screw by turning it clockwise with a coin and remove the stylus guard. 1 Press the PHONO/TAPE/AUX button once or twice to select PHONO. 5 Gently push the clamper to the right to release the tone arm. 2 Gently open the dust cover. clamper 6 Raise the cue lever to lift the tone arm off the tone arm support. tone arm < When opening the cover, pay attention to prevent your
Summary of the content on the page No. 17
ENGLISH 7 To stop playback Move the tone arm gently to the edge of the record (or the starting point of a track). When the playback has been finished, the tone arm automatically returns to the tone arm holder and the rotation stops. The turntable will begin to turn. To stop playback manually, slightly lift the tone arm using the cue lever and return it to the tone arm holder. tone arm 8 Gently lower the tone arm by slowly releasing the cue lever. You can lower the tone arm manually if the c
Summary of the content on the page No. 18
Listening to a CD 4 Press the OPEN/CLOSE button (L) to close the tray. < Be careful not to pinch your finger. < It takes a few seconds for the unit to load the disc. No buttons will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed. disc type indicator 1 Press the CD button. total number of the tracks total play time of the disc < The disc type indicator shows the type of disc currently loaded. “--” blinks for a few seconds. When
Summary of the content on the page No. 19
ENGLISH A D To pause playback Search for a part of a track Press the PLAY/PAUSE button (y/J) during playback. During playback, hold down the .m or ,/ button Playback stops at the current position. and release it when the part you want to listen to is found. To resume playback, press the PLAY/PAUSE button (y/J) again. B To stop playback Press the STOP button (H) to stop playback. C To skip to the next or a previous track During playback, repeatedly press the .m or ,/ button until the desire
Summary of the content on the page No. 20
Programmed Playback Up to 32 tracks can be programmed in the desired order. 2 3 Repeat steps and to program more tracks. < Insert a disc and select “CD” before beginning programming. < To select the same track consecutively, press the PROGRAM button again. < Shuffle playback does not work during programmed playback. < You can program up to 32 tracks. < Programmed playback works with finalized discs only. < To cancel the program mode, press the STOP button (H). 1 Press the PROGRAM button in th
