Summary of the content on the page No. 1
COMPACT DISC PLAYER
Operating Instructions
Summary of the content on the page No. 2
Consumer Guide Thank you for your purchasing of Vincent product. Please read this manual carefully to obtain the best performance of the CD-S6MK on your system. Warning .............................................................................................. 1 Function introduction Front panel controls ............................................................................. 2 Display controls .................................................................................. 4
Summary of the content on the page No. 3
Function introduction Front Panel Controls 1 2 COMPACT DISC PLAYER CD-S6MK COMPACT DIGITAL AUDIO POWER LEVEL SR WARM UP PHONES 10 12 3 4 5 6 7 8 9 11 13 1. Disc Tray Set a disc on this tray with its label side up.The tray slides out toward you when the OPEN/CLOSE button is pressed in any operation mode. When the OPEN/CLOSE button, PLAY/PAUSE " " button is pressed, the disc tray will move in. 2 . Multi-Function Display Window This display shows the state of play and e
Summary of the content on the page No. 4
Function introduction 7. PLAY/PAUSE Button ( ) Press this button first time to start normal play, or programmed play. The " " indicator will light while the disc is being played . Press this button second time to suspend play . The " " indicator will light while the disc is being suspend played. 8. OPEN/CLOSE Button ( ) When this button is pressed , the disc tray will slide out. When it is pressed again , the disc tray will slide back into
Summary of the content on the page No. 5
Function introduction Display Controls REPEAT 1 ALL A B PGM 1 2 3 4 RAN 5 6 7 8 MIN IN TR O 9 10 11 12 13 14 15 16 OV ER REMAIN a. Repeat indicators b.Program indicator c.Random indicator d.Track number indicator e.Play/Pause indicator f.Remain indicator g.Track indicator h.Elapsed playing time i.Intro indicator j.Over track number indicator when the disc has over 16 tracks, the indicator will light. 4
Summary of the content on the page No. 6
Function introduction Rear Panel Controls 1 2 3 4 5 + _ _ R L 1.COMMON 2.HOT ( ) 3.COLD ( ) R L AUDIO OUTPUTS 1. Analog Output RCA / XLR Jacks These jacks connect the power amplifier input RCA /XLR jacks. 2. Digital Output RCA Jack This jack connect the D/A coverter input RCA jacks. 3. Lamp Switch Press to adjust the tube windows brightness of front panel. 4. Fuse Box The compact disc player overloads as soon as fuse melting up at once A replacement of fuse by
Summary of the content on the page No. 7
Function introduction Incept Windows Remote Controls OPEN/CLOSE Button 1 2 6 3 7 4 8 5 Remote Control REPEAT Button BACK/NEXT Button PLAY/PAUSE Button 9 When Operating the remote control, point it STOP Button 10 at the remote sensor located on the amplifier is front panel. The remote control can be used up to 7 m from the amplifier and within a 30 angle on each side of the sensor. Notes : Exposing the remote sensor to direct sunlight or strong light may cause faulty operation. 1. REMAI
Summary of the content on the page No. 8
Function introduction 6. CANCEL Button In the stop mode, this button is used to cancel tunes which have been programmed. 7. PGM (Program) Button Press this button in the stop mode, to activate the programming operation. When this button is pressed, the " PGM " indicator lights in the display of the unit. To release the programming mode, press this button again. 8. RANDOM Button When this button is pressed , the player enters random play mode ( tracks in t
Summary of the content on the page No. 9
Precautions 8
Summary of the content on the page No. 10
Troubleshooting Basic troubleshooting of a CD player is similar to troubleshooting any other electronic equipment. Always check the most obvious possible causes first. To give you a few ideas of what to look for, check the following: Remedy Problem Probable Cause No power when POWER is Power plug not inserted Plug in securely. pressed securely. Disc loaded upside down. Load with label side up. No playback when disc is loaded Disc dirty. Clean disc surface. Connections are made Check connect
Summary of the content on the page No. 11
Technical Specifications 1. Frequency Response ................................................................ : 10Hz-20kHz 0.5dB 2. Audio Output Voltage .............................................................. : 2V 1.6dB 3. Dynamic Range ..................................................................... : 100dB 4. S/N Ratio ................................................................................ : 95dB > 5. Frequency Distortion ...........................................
Summary of the content on the page No. 12
