Grizzly H8192 user manual

User manual for the device Grizzly H8192

Device: Grizzly H8192
Category: Sander
Manufacturer: Grizzly
Size: 6.72 MB
Added : 4/3/2013
Number of pages: 36
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Grizzly H8192. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Grizzly H8192.

For your convenience

If looking through the Grizzly H8192 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Grizzly H8192 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Grizzly H8192 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Grizzly H8192 User manual - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Grizzly H8192 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Grizzly H8192. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

MODEL H8192
1" BELT/8" DISC
COMBINATION SANDER
OWNER'S MANUAL
COPYRIGHT © AUGUST, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS9703 PRINTED IN CHINA

Summary of the content on the page No. 2

����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������

Summary of the content on the page No. 3

Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .................................................................................................................................... 2 Contact Info ................................................................................................................................ 2 Machine Data Sheet ................................

Summary of the content on the page No. 4

INTRODUCTION Foreword Contact Info If you have any comments regarding this manual, We are proud to offer the Model H8192 please write to us at the address below: 1" Belt/8" Disc Combination Sander. This machine is part of a growing Grizzly family of fine Grizzly Industrial, Inc. woodworking machinery. When used according C /O Technical Documentation Manager to the guidelines set forth in this manual, you can P.O. Box 2069 expect years of trouble-free, enjoyable operation Bellingham, WA 9

Summary of the content on the page No. 5

Machine Data Sheet � � � � � � �� � � � �� � � � � � � � �� � � � �� �� � � � � �� � �� � � � � �� � � � � � � � �� �� � �� � � � � �� � � � � �� � � � � �� � � � � � � � �� �� � � �� � �� � � � � �� � � � � � � � � ������ ����� ��� ��� ����� ������� ����� ����� ������ ������� ���� ��������������������������������������������������������������� � ������������������������������������������������������������������������������������������� ������ ����� �������� ����������� � ������� ���������������

Summary of the content on the page No. 6

Identification B A C D F E G H P L I J M O K N Figure 1. Model H8192 identification. A. Sanding Belt 1" x 42" I. Motor B. Sanding Belt Tracking Knob J. Disc Table Angle Scale C. Sanding Disc 8" K. Disc Table Lock Handle D. Miter Gauge L. Disc Dust Port E. Disc Table M. ON/OFF Switch with Disabling Key F. V-Belt Safety Cover N. Rubber Machine Feet G. Sanding Belt Safety Cover O. Sanding Belt Table Lock Handle H. Sanding Belt Dust Port P. Sanding Belt Table -4- Model H8192 1" Belt/8" Disc Combo Sa

Summary of the content on the page No. 7

� � � �� � �� � �� � � � �� � � � �� � � � �� � � �� � � � � � � �� � � � �� � � � � � � �� � � �� � � � � � �� � � � � ��� � � � � � � � � �� � � � �� � � � � � � � � � �� � � � � � � �� � �� � � � � � �� � � � � � � �� � �� � �� � � � � � � �� � �� �� � � � � � � � � �� � �� � � � � � � � �� � � � � � � ���� � � � � �� � � � � �� � � � �� � � � � � �� �� � �� �� � � � � � �� � �� � � � � � � �� � � �� � � � � � �� � � � � �� � � � � � � � �� � �� � � � � � �� � � �� � � � � �� � �� � � � � � �

Summary of the content on the page No. 8

� � � � � �� � � � � � � �� � � � �� � � �� � � � � � � � � � ��� ����� ������ �������� ���� ���� � ���� � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� ���������� ����� �� ������ ��� ��������� ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � ����� ���� ���������� ��������� ������� ���� � ���������� ������������� ���� ����� ���� �������� ���� ���������� �� � ����������� ���� � � � � � � � � � � � � � � � � � � � � � � �

Summary of the content on the page No. 9

Additional Safety Instructions for Belt and Disc Sanders 1. RESPIRATOR AND SAFETY GLASSES. 6. UNATTENDED OPERATION. Never leave Always wear a respirator and safety glasses the machine running attended. while operating the sander. Dust and chips are created when sanding. Some debris will 7. DUST COLLECTION SYSTEM. Always be ejected, becoming hazards to the eyes operate the sander with an adequate dust and lungs. collection system in place and running. 2. AVOIDING ENTANGLEMENT. DO NOT 8. FEED

Summary of the content on the page No. 10

SECTION 2: CIRCUIT REQUIREMENTS 110V Operation Electrocution or fire could result if this machine is not grounded correctly or if your electrical Serious personal injury could occur if you configuration does not connect the machine to the power source comply with local and state before you have completed the set up pro- codes. Ensure compliance cess. DO NOT connect the machine to the by checking with a power source until instructed to do so. qualified electrician! Amperage Draw The Mo

Summary of the content on the page No. 11

SECTION 3: SETUP Setup Safety Items Needed for Setup The following items are needed to complete the This machine presents setup process, but are not included with your serious injury hazards machine: to untrained users. Read through this entire Description Qty manual to become • Safety Glasses (for each person) .............. 1 familiar with the controls • Phillips Head Screwdriver .......................... 1 and operations before • Wrench 14mm ........................................

Summary of the content on the page No. 12

Inventory The following is a description of the main B components shipped with your machine. Lay the A components out to inventory them. C Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally D we pre-install certain components for shipping F purposes. G E Inventory: (Figures 3–4) Qty Figure 3. Model H8192 inventory items A–G. A. Motor and Base .......................................... 1 B. Belt

Summary of the content on the page No. 13

Hardware Recognition Chart -11- Model H8192 1" Belt/8" Disc Combo Sander

Summary of the content on the page No. 14

Clean Up Site Considerations The unpainted surfaces are coated with a waxy Placement Location oil to prevent corrosion during shipment. Remove Consider existing and anticipated needs, size of this protective coating with a solvent cleaner or material to be processed through each machine, citrus-based degreaser such as Grizzly’s G7895 and space for auxiliary stands, work tables or Citrus Degreaser. To clean thoroughly, some parts other machinery when establishing a location for must be r

Summary of the content on the page No. 15

Assembly Assembly To avoid risk of serious injury, DO NOT connect the sander to power until told to do so in the Test Run subsection. To assemble your combo sander: Figure 7. Cap screws securing the belt housing 1. Using 13mm wrenches, loosen the four motor assembly (viewed from underneath the base). mount hex bolts (Figure 6) so you can adjust the motor position in the next steps. Belt Housing Assembly Motor Mounting Base Hex Bolts (2 of 4) Figure 8. Belt housing assembly installed. Figu

Summary of the content on the page No. 16

Deflection 5. Position the belt housing assembly so there 7. Secure the right side of the V-belt cover with 1 is about ⁄4" V-belt deflection when moderate one M4-.7 x 10 Phillips head screw and flat pressure is applied to the V-belt between the washer. pulleys (see Figure 10)—then fully tighten the cap screws to secure the belt housing 8. Position the V-belt rear cover, as shown in assembly in place. Figure 12, and secure it in place with the M4- .7 x 40 Phillips head screw and wingnut. Wing

Summary of the content on the page No. 17

9. Peel the backing from the 8" sandpaper disc 15. Lay the sander down on a flat surface, as and apply it to the aluminum disc. shown in Figure 15, and place a thin piece of 1 cardboard approximately ⁄16" thick over the 10. Thread the M5-.8 x 5 set screw into the sanding disc. This piece of carboard will act aluminum disc shaft. as a spacer when you install the disc table. 11. Slide the aluminum disc onto the motor arbor, making sure to align the arbor key with the disc keyway. 12. Rotate

Summary of the content on the page No. 18

1 17. Secure the dust port, as shown in Figure 17, 20. Install the belt table with a ⁄16" clearance from with the M6-1 x 15 Phillips head screw and the sanding belt, and secure it in place with flatwasher. the table lock handle (see Figure 19). Mounting Screw Figure 17. Disc dust port installed. Figure 19. Sanding belt table installed. Note: Make sure the dust port covers the 21. Loosen the cap screw shown in Figure 20, 1 entire opening in the dust cover. adjust the belt support approximatel

Summary of the content on the page No. 19

5. Turn the machine OFF. Test Run 6. Remove the switch disabling key, as shown in Figure 21. Once the assembly is complete, test run your sander to make sure it runs properly and is ready for regular operation. The test run consists of verifying the following: 1) The motor powers up and runs correctly, and 2) the switch disabling mechanism on the switch works correctly. If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine

Summary of the content on the page No. 20

Mounting Mounting Sander Dust Collection Once you have confirmed that your machine is running properly, mount it to a workbench. DO NOT operate the Model H8192 without The strongest mounting option is a "Through an adequate dust collection system. This Mount" where holes are drilled all the way through sander creates substantial amounts of wood the workbench, and hex bolts, washers, and dust while operating. Failure to use a dust lock nuts are used to secure the sander to the collection


Alternative user manuals
# User manual Category Download
1 Grizzly 7" Angle Polisher H0593 User manual Sander 0
2 Grizzly 37'' WIDE BELT G0446 User manual Sander 0
3 Grizzly 37'' WIDE BELT G0539 User manual Sander 1
4 Grizzly Air Belt H0596 User manual Sander 0
5 Grizzly Belt G0581 User manual Sander 2
6 Grizzly Bending Brake T21319 User manual Sander 0
7 Grizzly 9962ZX User manual Sander 0
8 Grizzly BLU-RAY DISC DRIVE GBC-H20L User manual Sander 2
9 Grizzly Belt H2933 User manual Sander 0
10 Grizzly 37'' WIDE BELT G0571 User manual Sander 1
11 Grizzly Double head Wide Belt G0581 User manual Sander 1
12 Grizzly Drum H2882 User manual Sander 0
13 Grizzly Disc G0724 User manual Sander 0
14 Grizzly Double head Wide Belt H2933 User manual Sander 1
15 Grizzly G0446 User manual Sander 0
16 3Com Tech Note Wireless Remote Control TT24 User manual Sander 2
17 Agilent Technologies 16440A SMU User manual Sander 0
18 Alpha Industries AEP-458 User manual Sander 0
19 Bausch & Lomb DISCOVERER 78-1600 User manual Sander 12
20 Agilent Technologies 83485A User manual Sander 1