Summary of the content on the page No. 1
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 1
®
PRO 7000
™
Professional Reference PowerSource
™
with Dual Balanced Pure Power
Owner’s Manual
Summary of the content on the page No. 2
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 2
Summary of the content on the page No. 3
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page i TABLE OF CONTENTS Important Safety Precautions ..................................................................................................................................ii Proper Grounding and Installation Tips ....................................................................................................................v Monsterous Introduction .......................................................................................
Summary of the content on the page No. 4
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page ii IMPORTANT SAFETY PRECAUTIONS Please read and observe the following safety points at all times. WARNING - Power Sources Do not plug your Monster PowerSource into a power outlet that differs from the source indicated for safe use on the Monster PowerSource. If you don’t know the type of electrical power that is supplied to your place of business, please consult your local power company. WARNING - Grounding and Polarization A. Your Monster Powe
Summary of the content on the page No. 5
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page iii WARNING - Liquid: Avoiding Electrical Shocks Do not operate your Monster PowerSource if liquid of any kind is spilled onto or inside the unit. Do not operate your Monster PowerSource near rain or water that’s spilled or openly exposed (e.g., bathtub, kitchen or bathroom sink). WARNING - Power Cord Safety A. When routing your Monster PowerSource AC power cord, do not place it near heavy foot traffic areas (e.g., hallways, doorways, and kitch
Summary of the content on the page No. 6
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page iv WARNING - Storm Precautions In the event of a lightning storm, immediately disconnect your Monster PowerSource from its power source. It’s not necessary to disconnect any components from your Monster PowerSource. WARNING - No User Serviceable Parts Inside If, for any reason, your Monster PowerCenter is not operating properly, do not remove any part of the unit (cover, etc.) for repair. Unplug the unit and consult this owner’s manual for warr
Summary of the content on the page No. 7
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page v PROPER GROUNDING AND INSTALLATION TIPS CAUTION - Proper Grounding Monster PowerSource requires a properly grounded 3-wire outlet to protect connected equipment. If your AC outlet is improperly wired (no ground or reverse polarity), the green ”SYSTEM GROUNDED” LED on the front panel of the Professional Reference PowerSource PRO7000 will not light up. Many older buildings are inadequately wired. It’s very common for a building to be improperly g
Summary of the content on the page No. 8
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 2 MONSTEROUS INTRODUCTION ™ Thank you for purchasing Monster Power’s Professional Reference PowerSource PRO7000. PowerSource products reflect Monster’s commitment to creating performance -enhancing solutions for stage and studio, delivering superior tone and sound quality. Ordinary AC power accessories may seriously compromise the equipment they power. The advanced technologies and innovative design of the PowerSource solves this problem and off
Summary of the content on the page No. 9
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 3 MONSTER’S PATENTED CLEAN POWER STAGES ™ ™ Each PowerSource has its own Clean Power stage. Clean Power performs two tasks that are vital ™ to high-performance analog, computer and digital reproduction: filtration and isolation. The higher the Clean Power stage number, the more sophisticated and advanced the filters. Also, the higher the number, the greater the isolation between connected equipment for maximum component-generated noise rejection
Summary of the content on the page No. 10
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 4 MONSTER T2 TECHNOLOGY The Monster Power Professional Reference PRO 7000 features Monster’s exclusive T2 technology. T2 is an active electronic microprocessor-controlled circuitry that sits in front of the surge protection MOVs in Monster Power products. T2 monitors the line, neutral and ground lines and disconnects the Power Center (and so its outlets) from the AC power line when a long duration low voltage sag or high voltage swell occurs — th
Summary of the content on the page No. 11
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 5 BEHIND THE MONSTER POWERSOURCE DESIGN Richard Marsh – There are few experts able to solve the complex problems of AC power, and Richard Marsh is one of the illustrious few. He’s designed best-selling power conditioners costing more than $3,000, and now brings his expertise to Monster Power. Richard developed Monster’s exclusive Clean Power circuitry, and several other groundbreaking designs. Richard’s background and research into amplifier and
Summary of the content on the page No. 12
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 6 MONSTER CHECKLIST Before you do anything, make sure you have all the components you need to enjoy your new high performance Monster PowerSource. You’ll need the following items to get started: 1) This owner’s manual. 2) Your favorite pen or a computer with an Internet browser (to register your Monster warranty information). 3) One Monster Power Professional Reference PowerSource PRO7000. 5
Summary of the content on the page No. 13
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 7 HOOKUP GUIDE STEP 1 Phone Line Hookup The PowerSource has facilities to protect a single phone line. FOR STANDARD TELEPHONE LINE PROTECTION A) Connect a phone cable from a telephone wall jack to the PRO7000 IN jack (figure 1a). B) Connect a second phone cable from the PRO 7000 OUT jack to the telephone (figure 1b). 6
Summary of the content on the page No. 14
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 8 Step 2 Outlet Programming All PowerSource outlets on the rear panel are programmable. To set up each outlet pair, use the front panel MENU and SET buttons to choose between SWITCHED ON, SWITCHED ON AFTER DELAY and UNSWITCHED (Always On) independently for each outlet pair. You can change the settings, whenever you like. Using the outlet pair labeled ANALOG FILTER as an example, the following diagrams illustrate how it’s done: A) Power up the
Summary of the content on the page No. 15
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 9 C) Set the Outlet Pair to SWITCHED ON AFTER DELAY: Press MENU until the display shows the status of the Analog outlet pair. Press the SET button until the time delay changes to the required delay in seconds before the outlet pair will turn on after the ON/OFF button is pressed, as in figure 4. When the PowerSource is SWITCHED ON by pressing the front panel ON/OFF button, or by an external trigger signal, the outlet pair will go “live” after t
Summary of the content on the page No. 16
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 10 Step 3 Over- and Under-Voltage Audible Alarm Setting This feature enables or disables the audible alarm indicating an abnormal line voltage condition. When set to ENABLE, the unit will sound an alarm when the line voltage tops 130V or drops below 100V. A) Press MENU until the displays shows the alarm setting, as in figure 6: B) Press SET to toggle between ENABLE and DISABLE, as in figure 7. 9
Summary of the content on the page No. 17
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 11 Step 4 Over- and Under-Voltage Automatic Shutdown Setting This feature enables or disables the automatic shutdown feature for abnormal line voltage. When set to ENABLE, the unit will shut itself down whenever the line voltage tops 134V or drops below 96V. A) Press MENU until the display shows: B) Press SET to toggle between ENABLE and DISABLE as in figure 8 and 9. 10
Summary of the content on the page No. 18
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 12 Step 5 Remote AC Control Hookup This feature allows your PowerSource to be turned on or off by a component with a switched 120V output. A) Insert the (included) Remote AC Control Cord’s female plug into your PowerSource REMOTE IN AC 120V jack (see diagram below). B) Insert the Remote AC Control Cord’s 2-prong male plug into a switched AC power outlet on your receiver or preamplifier. When you turn this device on, the outlets programmed as S
Summary of the content on the page No. 19
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 13 Step 6 Remote DC Control Hookup This feature allows your PowerSource to be turned on and off with an Automatic Switching Control. A component that shouldn’t be powered on constantly (such as an amplifier) can be plugged into one of the SWITCHED ON AFTER DELAY outlets and activated when needed. This feature also allows the DC low-voltage cable to control multiple PowerSources. A) Plug a 1/8“ mini-plug cable into the REMOTE IN DC 3 - 30V outl
Summary of the content on the page No. 20
LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 14 Step 7 XLR Jack Hookup NOTE: You’ll need an additional Monster XLR light to connect to the PRO7000’s XLR light Jack. ® Use the dimmer knob to control light intensity. To remove the Monster XLR light from the XLR Jack, press the PUSH tab, and gently pull on the metal housing of the XLR plug. XLR LAMP PUSH 13
