A&D HC-15Ki user manual

User manual for the device A&D HC-15Ki

Device: A&D HC-15Ki
Category: Scale
Manufacturer: A&D
Size: 1.05 MB
Added : 9/23/2013
Number of pages: 60
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for A&D HC-15Ki. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with A&D HC-15Ki.

For your convenience

If looking through the A&D HC-15Ki user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual A&D HC-15Ki on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual A&D HC-15Ki to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
A&D HC-15Ki User manual - Online PDF
Advertisement
« Page 1 of 60 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual A&D HC-15Ki but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to A&D HC-15Ki. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Counting Scale
HC-30Ki
HC-15Ki
HC-6Ki
HC-3Ki
WM+PD4001164

Summary of the content on the page No. 2

This manual and Marks All safety messages are identified by the following, “WARNING” or “CAUTION”, of ANSI Z535.4 (American National Standard Institute: Product Safety Signs and Labels). The meanings are as follows: A potentially hazardous situation which, if not avoided, could result WARNING in death or serious injury. A potentially hazardous situation which, if not avoided, may result in CAUTION minor or moderate injury. This is a hazard alert mark. This mark informs you abo

Summary of the content on the page No. 3

Contents 1. INTRODUCTION..................................................................................................................................3 1-1. Introduction....................................................................................................................................3 1-2. Unpacking......................................................................................................................................4 1-3. Parts Overview ....................

Summary of the content on the page No. 4

11. AWA FUNCTION...............................................................................................................................39 11-1. AWA Audible Weighing Assist................................................................................................39 11-2. To Enable/Disable AWA Function...............................................................................................39 12. OP-02 BATTERY..................................................................

Summary of the content on the page No. 5

1. INTRODUCTION 1-1. Introduction Thank you for your Purchase! This manual describes the functions of your counting scale and how to get the most out of it. Read this manual carefully before use. Features The HC-i counting scales have the following features: The scales have the high internal resolution for a wider range of counting applications. HC-3Ki / 6Ki / 30Ki: 1/600,000 HC-15Ki: 1/750,000 There are the following ways to enter a unit weight (of the sample piece). The way t

Summary of the content on the page No. 6

1-2. Unpacking Unpack the scale carefully and keep the packing material if you are likely to transport the scale again in the future. HC-i SERIES In the carton you should find this manual plus: The counting scale. INSTRUCTION MANUAL An AC adapter (check that the AC input rating is correct). Remove the protective packing materials from around the scale and between the pan and scale casing. Instruction Manual Remove Packing Material AC Adapter Please confirm that the AC adapter type

Summary of the content on the page No. 7

1-4. Setting Up Your Scale 1. Place the scale on a suitable weighing surface (see “Best Conditions For Weighing” below) and turn the adjustable feet until the spirit level shows that the scale is level. 2. Plug in the AC adapter. The AC input requirements could be l00, 120, 220, 230 or 240 Volts (50/60Hz) depending AC adapter jack on the area in the world so please check that the adapter is correct. Earth the chassis if you think static electricity may be a problem. Earth terminal 3. P

Summary of the content on the page No. 8

1-5. Simple Operation Mode If desired, the HC-i scale can be set in a Simple Operation Mode. Set the F-Function f-01-01 at “1”. In this mode, only front panel keys that would be used in “3-3. Unit Weight By a Sample” counting operations are active. All others will not operate. The following keys are active in Simple Operations Mode: Keys that will operate in Simple Operation Mode: ON ZERO TARE SAMPLE ENTER 0~9 RESET OFF 1-6. kg or lb Weighing Units USA Version ONLY The HC-i scale can weig

Summary of the content on the page No. 9

3. Press the ENTER key. The scale will recall the previous unit ENTER 888.8.888 . 0 weight. 8880000 . 881.23450 This feature cannot be used in Simple Operation Mode. Automatic Last Unit Weight Used When you turn the display ON, the scale can automatically recall the last unit weight used from memory, if desired. Set the F-Function f-01-04 at “1”. The scale will recall the last unit weight used, when the display is turned ON. 7

Summary of the content on the page No. 10

2. Front Panel Overview 8 2. Front Panel Overview The M+ key accumulates the Count The key sets or The TOTAL data. recalls target weight to The PRINT key annunciator comes use the AWA function. The M+ sends Count, Weight ON when the COUNT The key displays The TOTAL key or Unit Weight data. annunciator comes display is showing the comparator limits, works displays the ON when Count data The RESET key TOTAL value. as M- key or toggles accumulated data on is be

Summary of the content on the page No. 11

3. BASIC OPERATIONS 3-1. Basic Operations ON OFF Turn The Power ON and OFF 1. Press the ON/OFF key to turn the power ON. COUNT All the display symbols will turn on. After a few seconds, the display turns off once. TOTAL888.8.88. .8.8 Then, the scale will automatically take M+ zero (power-on zero) and the display SAMPLE HI OK LO TOO LIGHT shows zero. WEIGHT UNIT WEIGHT STABLE TARE ENTERED888.8.8.88. 888.8.8.88. .8. ZERO ACAI 2. Press the ON/OFF key again, and the COUNT power will be sw

Summary of the content on the page No. 12

TARE The TARE key will subtract the displayed container weight. WEIGHT STABLE 1. Remove everything from the weighing pan and TARE press the ZERO key to zero the scale. ENTERED8880000 . ZERO 2. Place a tare container on the WEIGHT weighing pan. The weight STABLE display will show the weight of TARE ENTERED8880.650 the container. ZERO Container weight WEIGHT 3. Press the TARE key. Then the STABLE weight display shows “-------” TARE TARE and waits for the weighing data to ENTERED 88800

Summary of the content on the page No. 13

3-2. To Start Counting 1. Press the ON/OFF key to turn the COUNT scale ON. Or press the RESET key to initialize any previous operations. TOTAL888.8.888 . 0 M+ SAMPLE HI OK LO TOO LIGHT 2. The three LED’s on the UNIT WEIGHT WEIGHT UNIT WEIGHT BY keys will blink. This is to prompt you STABLE TARE to select a method for entering a unit ENTERED8880.000880.00000 weight for operation. ZERO ACAI 3. Select one of the ways to enter or recall the unit weight (the weight of one item of what you a

Summary of the content on the page No. 14

3-3. Unit Weight By a SAMPLE 10 Sample Size 1. The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you are going to use a tare container, place it on the weighing pan. COUNT 2. Press the SAMPLE key. Any tare container will be automatically tared. SAMPLE 888.8.88. 10 The display Will show “add” “10 pcs”. WEIGHT UNIT WEIGHT If weight isn’t zero, press the TARE. 8880.00088add000 COUNT 3. Place l0 sample pieces on the we

Summary of the content on the page No. 15

5, 25, 50 or 100 Sample Size 1. The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you are going to use a tare container, place it on the weighing pan. COUNT 2. Press the SAMPLE key. Any tare container will be automatically tared. SAMPLE 888.8.88. 10 The display will show “add” “10 pcs”. WEIGHT UNIT WEIGHT If weight isn’t zero, press the TARE. 8880.00088add000 10 5 25 50 100 3. Press the SAMPLE key to do throug

Summary of the content on the page No. 16

Desired Sample Size 1. The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you are going to use a tare container, place it on the weighing pan. COUNT 2. Press the SAMPLE key. Any tare container will be automatically tared. SAMPLE 888.8.88. 10 The display Will show “add ” “10 pcs”. WEIGHT UNIT WEIGHT If weight isn’t zero, press the TARE. 8880.00088add000 COUNT 3. Use the 0 9 10-key pad to display the sample size desir

Summary of the content on the page No. 17

Desired Sample Size Not Using The SAMPLE Key 1. The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you are going to use a tare container, place it on the weighing pan and press the TARE key. Be sure to set the weight display is “0”. COUNT TARE 888.8.881 . 0 WEIGHT UNIT WEIGHT If weight isn’t zero, press the TARE. 8880.000880.000000 00 COUNT 2. Place sample pieces on the weighing pan (or in the tared 888.8.8.820 contain

Summary of the content on the page No. 18

3-4. Unit Weight By KEYBOARD 1. The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you are going to use a tare container, place it on the weighing pan and press the TARE key. Be sure to set the weight display is “0”. COUNT 2. Press the KEYBOARD key. KEY- BOARD The unut weight display and the 888.8.8.810 ENTER key LED will blink. WEIGHT UNIT WEIGHT 8880000 . 88add0000 00 COUNT 3. Use the 0 9 and . 10-key pad to displ

Summary of the content on the page No. 19

3-5. Unit Weight By ID Number 1. If there are no unit weights stored into memory, see “5-1. Store unit weight by ID Numbers”. The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key to clear any unit weight. COUNT 2. Press the ID key. ‘id-00’ will be displayed with 00 888.8.8810 . blinking. WEIGHT UNITWEIGHT ID. 8880.00088aid-00 COUNT 3. Use the 0 9 10-key pad to display the ID number. 888.8.8.810 If you hit the wrong key, press the WEIGHT UNIT

Summary of the content on the page No. 20

4. ENTERING A TARE WEIGHT There are two methods of tare operations. Using the TARE key to subtract the displayed container weight directly. Please see “3-1. Basic Operations ”. Using the KEYBOARD TARE key to enter a tare weight via the 10-key pad. 4-1. Using the KEYBOARD TARE Key 1. Remove everything from the weighing pan and press the ZERO key to zero the scale. COUNT 2. Press the KEYBOARD TARE key. The weight display will blink (display is 888.8.8.810 any tare weight previously ente


Alternative user manuals
# User manual Category Download
1 A&D Ej Series Compact Balance EJ-1500 User manual Scale 17
2 A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 User manual Scale 13
3 A&D Ej Series Compact Balance EJ-440 User manual Scale 0
4 A&D FG-150KAL User manual Scale 1
5 A&D Ej Series Compact Balance EJ-2000 User manual Scale 2
6 A&D Ej Series Compact Balance EJ-4100 User manual Scale 5
7 A&D Ej Series Compact Balance EJ-120 User manual Scale 2
8 A&D Ej Series Compact Balance EJ-6100 User manual Scale 5
9 A&D FG-150KBM User manual Scale 0
10 A&D GR Series GR-300 User manual Scale 11
11 A&D GR Series GR-120 User manual Scale 12
12 A&D FG-60KAM User manual Scale 3
13 A&D FS-30Ki User manual Scale 7
14 A&D FG-60KAL User manual Scale 13
15 A&D HC-30Ki User manual Scale 12
16 A&D Ej Series Compact Balance EJ-1500 User manual Scale 17
17 A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 User manual Scale 13
18 A&D Ej Series Compact Balance EJ-440 User manual Scale 0
19 A&D FG-150KAL User manual Scale 1
20 A&D Ej Series Compact Balance EJ-2000 User manual Scale 2