A&D HW100KGV user manual

User manual for the device A&D HW100KGV

Device: A&D HW100KGV
Category: Scale
Manufacturer: A&D
Size: 1.9 MB
Added : 9/23/2013
Number of pages: 71
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for A&D HW100KGV. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with A&D HW100KGV.

For your convenience

If looking through the A&D HW100KGV user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual A&D HW100KGV on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual A&D HW100KGV to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
A&D HW100KGV User manual - Online PDF
Advertisement
« Page 1 of 71 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual A&D HW100KGV but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to A&D HW100KGV. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

HW-G Series
HW-G Series
Digital Platform Scales
Digital Platform Scales
Instruction Manual
0Z1M v1a
HW-10KGL HW-10KGV
HW-60KGL HW-60KGV
HW-100KGL HW100KGV
HW-200KGL HW-200KGV

Summary of the content on the page No. 2

Summary of the content on the page No. 3

 1 Compliance ........................................................................................3 1.1 Compliance with FCC rules ...........................................................3 2 Outline and Features .........................................................................4 3 Unpacking ..........................................................................................5 3.1 Accessories and Options list .........................................................6 4 C

Summary of the content on the page No. 4

14 Calibration (Adjusting the Scale)......................................................39 14.1 The Gravity Acceleration Table ...................................................40 14.2 The Complete Calibration Procedure ..........................................41 14.2.1 Gravity Acceleration Correction ...............................................41 14.2.2 Preparation ..............................................................................41 14.2.3 Calibration of the Zero Point.......

Summary of the content on the page No. 5

       Please note that this equipment generates, uses and can radiate radio frequency energy. This equipment has been tested and has been found to comply with the limits of a Class A computing device pursuant to Sub-part J of Part 15 of FCC rules. These rules are designed to provide reasonable protection against interfer- ence when this equipment is operated in a commercial environment. If this unit is operated in a residential area it might cause some inte

Summary of the content on the page No. 6

     The HW-G series is a platform scale with a minimum resolution of 1/10000 . Type L scales have an LCD (Liquid Crystal Display) and use batteries as a power source to provide portability. This type can also use an AC mains adaptor. Type V scales have a fluorescent display so the weighing value can be read in dim light. This type uses the AC power line as a power source. The base unit (platform) is water-resistant in accordance with IP-65 specifications. The counting mode fu

Summary of the content on the page No. 7

                                       ## $%"&'("  )%  " ' #*#                         +  ,-. . / 

Summary of the content on the page No. 8

      Accessories for HW-G series Type Products Accessories HW-10KGV Display unit cover Instruction manual Type V HW-60KGV Display unit cover HW-100KGV 5mm Allen wrench HW-200KGV Instruction manual HW-10KGL Display unit cover AC adaptor Instruction manual Type L HW-60KGL Display unit cover HW-100KGL 5mm Allen wrench HW-200KGL AC adaptor Instruction manual HW-G Instruction Manual Page 6 HW-G OZIM v1a

Summary of the content on the page No. 9

Options List Order code or option name Accessories OP-03 RS232C interface / Relay output / Buzzer Connector JA:TCP0586 OP-04 RS422/485 interface / Relay output Connector TM:BLA9 AC adaptor OP-06 Built-in printer for type V Paper PP156 Ink ribbon ERC-05 AX-K0557A RS232C cable, D-sub 25 pin, 2m AX-KO1786-200 RS232C cable, D-sub 9 pin, 2m Consumables AX-PP156-S Special roll paper (10 rolls in a set) AX-ERC-05-S Ink ribbon (5 ribbons in a set) HW-G Instruction Manual Page 7 HW-G OZIM v1a

Summary of the content on the page No. 10

         !  Consider the following conditions to get the most from your scale. The best operation is where the temperature and relative humidity are stable, the scale is installed on a solid floor or bench and there is no draft. Do not install the scale in direct sunlight. Do not install the scale near heaters or air conditioners. Do not install the scale where there is flammable or corrosive gas present. Do not install the scale near equipment which pro

Summary of the content on the page No. 11

"   !  This procedure includes all of the steps for installing the HW-G series scales *  Step 1 Unpacking Remove the weighing pan from the carton and 0 place to one side. Remove the base unit and column from the carton, taking care not to pull on the loadcell cable. 0 Step 2 Secure the Column Step 2a Remove the 4 Allen screws from  the column lower bracket.  ) Step 2b Pull the excess loadcell cable 0) through the column as you position

Summary of the content on the page No. 12

Select the place where you intend to instal the scale. ))+ Consider “4. Caution” on page 8. Step 5 Level the Scale Level the base unit by using the “Bubble spirit level” +&% and “Levelling feet”. 0 2 3 Step 6 Adjust the Display Unit Press the caps at the pole top from both sides and adjust the angle of the display unit. 0 Step 7 Connect the Power Install the batteries (see page 11) or connect the AC adaptor or mains cable. Check the weighing accuracy. If

Summary of the content on the page No. 13

"  #  $% & Step 1 If necessary turn off the display and remove the AC adaptor. Step 2 Press and slide downwards to remove the external cover. Press the hook of the internal cover to the left side and lift off the cover. Step 3 Insert six new dry cells ensuring correct polarity (+,-). Battery size is ‘D’. Step 4 Replace the covers removed in step 2. Caution Replace used dry cells with six new ones, when BATT is displayed. Do not mix used and new batteries. It may caus

Summary of the content on the page No. 14

' (   #&4  *  &"  $0 .*5% ( * *#!" *)&"!&"' +&6 ))0+ * 5% ' HW-G Instruction Manual Page 12 HW-G OZIM v1a

Summary of the content on the page No. 15

' )  % !% *  Display and Symbols Meaning Stability mark. When the current weight value is not changing, this mark is displayed. The reading may now be taken. Zero point mark. With nothing on the pan and pressing the ZERO switch or with a mass on the pan and pressing the TARE switch, this mark is displayed. The zero point is the starting point to weighing. Net mark. After pressing the TARE switch this mark is displayed to show net weight is displayed Preset tare mark. When storin

Summary of the content on the page No. 16

Display and Symbols Meaning Example:- Display of the counting mode. This mode uses the registered unit mass, counts the PCS quantity of articles on the pan. The unit is . Example:- Storing the unit mass in the counting mode. This is a display of zero point for counting mode and uses 20 pieces for the unit mass registration. Example:- Storing the unit mass in the counting mode. Sign “-” means “weighing value is not zero”. Sample number is 10 pieces. Example:- Percentage mode. This mode uses the r

Summary of the content on the page No. 17

Displays and Symbols Meaning Calibration error. Means “Calibration mass is too heavy”. Check the base unit and weighing pan. Weighed value is unstable due to drift, vibration etc. when turning on the scale. Check around the weighing pan. Check the connection of the load cell cable. Remove everything from the weighing pan. Check around weighing pan. Perform zero point calibration of the scale. Accumulated data count Total mass value of the accumulated data. Comparator function = display is an

Summary of the content on the page No. 18

Set switch. Can be used to turn the comparator on/off. (Refer to  ) Counting mode, it is used to enter the mode to store the unit mass. Percentage mode, it is used to enter the mode to store the 100% mass. In the full/dribble batch function, it is used as a start switch. In the preset tare, and selecting calibration mass, it is used to select a figure. Mode switch. Used to change the current unit. While setting modes, this switch is used for “storing a parameter and proceeding the next step”.

Summary of the content on the page No. 19

+ #      +$ ! ,-#  .   7.1.1 Type V or Type L with AC adaptor Step 1 Ensure that the pan is empty. Step 2 Confirm that local voltage and receptacle type match your scale. Step 3 The scale turns on/off using the ON/OFF switch alternately. Step 4 Check the accuracy of weighing. If you calibrate the scale, perform it after allowing the scale to warm up for 30 minutes. Step 5 Press the ZERO switch to display zero. (With nothing on the pan.) Step 6 Place

Summary of the content on the page No. 20

7.1.2 Type L with Batteries Step 1 Install six new batteries. Refer to “5.1. Installing the batteries for Type L”. Step 2 Ensure that the pan is empty. Step 3 The scale turns on/off using the ON/OFF switch alternately. Step 4 Check the accuracy of weighing. If you calibrate the scale, perform it after warming up the scale for 30 minutes. You will need to disable the auto power off function. See 15.2 page 43. Step 5 Press the ZERO switch to display zero. (With nothing on the pan.) Step 6 Gent


Alternative user manuals
# User manual Category Download
1 A&D Ej Series Compact Balance EJ-1500 User manual Scale 17
2 A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 User manual Scale 13
3 A&D Ej Series Compact Balance EJ-440 User manual Scale 0
4 A&D FG-150KAL User manual Scale 1
5 A&D Ej Series Compact Balance EJ-2000 User manual Scale 2
6 A&D Ej Series Compact Balance EJ-4100 User manual Scale 5
7 A&D Ej Series Compact Balance EJ-120 User manual Scale 2
8 A&D Ej Series Compact Balance EJ-6100 User manual Scale 5
9 A&D FG-150KBM User manual Scale 0
10 A&D GR Series GR-300 User manual Scale 11
11 A&D GR Series GR-120 User manual Scale 12
12 A&D FG-60KAM User manual Scale 3
13 A&D FS-30Ki User manual Scale 7
14 A&D FG-60KAL User manual Scale 13
15 A&D HC-30Ki User manual Scale 12
16 A&D Ej Series Compact Balance EJ-1500 User manual Scale 17
17 A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 User manual Scale 13
18 A&D Ej Series Compact Balance EJ-440 User manual Scale 0
19 A&D FG-150KAL User manual Scale 1
20 A&D Ej Series Compact Balance EJ-2000 User manual Scale 2