Toshiba TEC SL-9000-FFH-CA user manual

User manual for the device Toshiba TEC SL-9000-FFH-CA

Device: Toshiba TEC SL-9000-FFH-CA
Category: Scale
Manufacturer: Toshiba
Size: 0.53 MB
Added : 7/9/2014
Number of pages: 92
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Toshiba TEC SL-9000-FFH-CA. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Toshiba TEC SL-9000-FFH-CA.

For your convenience

If looking through the Toshiba TEC SL-9000-FFH-CA user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Toshiba TEC SL-9000-FFH-CA on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Toshiba TEC SL-9000-FFH-CA to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Toshiba TEC SL-9000-FFH-CA User manual - Online PDF
Advertisement
« Page 1 of 92 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Toshiba TEC SL-9000-FFH-CA but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Toshiba TEC SL-9000-FFH-CA. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

TEC Electronic Computing Scale
SL-9000/9000N-FFH-US/CA/QR
Owner’s Manual

Summary of the content on the page No. 2

Summary of the content on the page No. 3

TABLE OF CONTENTS Page 1. INTRODUCTION..................................................................................................... 1- 1 1.1 APPLICABLE MODEL ................................................................................... 1- 2 1.2 ACCESSORIES............................................................................................. 1- 2 2. SPECIFICATION..................................................................................................... 2-

Summary of the content on the page No. 4

Page 11. PROGRAMMED DATA VERIFICATION REPORTS................................................. 11- 1 12. PASSWORD SECURITY......................................................................................... 12- 1 12.1 SETTING PASSWORD AND PROTECT MENU............................................. 12- 1 12.2 CALLING MENU BY ENTERING PASSWORD .............................................. 12- 3 13. OPERATING PROCEDURES ...........................................................................

Summary of the content on the page No. 5

Summary of the content on the page No. 6

1. INTRODUCTION 1. INTRODUCTION 1. INTRODUCTION Thank you for purchasing the TEC SL-9000 electronic computing scale. The TEC SL-9000 is designed to be hung from the ceiling. As you will discover, it has many features and functions designed for user friendliness as well as complete customer satisfaction. The 256x64 dot fluorescent display provides customers with ample information, the 216 speed keys realize a higher degree of operability, and the 3 inch/sec. print speed ensures fast and clear p

Summary of the content on the page No. 7

1. INTRODUCTION 1.1 APPLICABLE MODEL 1.1 APPLICABLE MODEL • SL-9000-15M-FFH-CA • SL-9000-30M-N-FFH-US • SL-9000-15M-FFH-QR • SL-9000-15M-N-FFH-CA • SL-9000-15M-N-FFH-QR The description of the model number is as follows. SL-9000-30M-N-FFH-US Destination Code ex.) US, CA, QR, etc. Max. Capacity 30M: 30 lbs (decimal pound Scale Type /multi-interval) H: Hanging scale 15M: 15 Kg (multi-interval) Display Type FF: Fluorescent full dot display N: LAN (Option) is available. Blank: LAN (Option) is

Summary of the content on the page No. 8

2. SPECIFICATION 2.1 SCALE 2. SPECIFICATION 2.1 SCALE Item US CA QR Maximum Capacity 30 lb 15 Kg (30 lb) Minimum Scale Division 0.005 lb (0 to 15 lb.) 0.002 Kg (0 to 6 Kg) 0.005 Kg (6 to 15 Kg) 0.01 lb (15 to 30 lb.) 0.005 lb (0 to 15 lb) 0.01 lb (15 to 30 lb) Display Range 0 to 30.05 lb 0 to 15.025 Kg (0 to 30.05 lb) Maximum Tare 2.000 lb 1.000 Kg (2.205 lb) Unit Price Presettable $ 0.01 to 99.99 $ 0.01 to 99.99 0 to 99999 Minimum Price Display $ 0.01 $ 0.01 1 Power Requirement AC 120 V ±10%, 6

Summary of the content on the page No. 9

2. SPECIFICATION 2.2 OPTION 2.2 OPTION Model No. Option Name Description Source or Part No. LON Connector Part No. A modular connector used to connect scales See TM8P-88P EAJ-0028001 to each other in a LON configuration. Note 2 Part No. A modular resistor attached to the scales See LON Terminal EAJ-0029001 connected at both ends of the LON Note 2 Resistor 285D-8P LON configuration. Part No. An 8-pin telephone cable used with the LON See LON Cable 10319100003 connectors attached to both ends of t

Summary of the content on the page No. 10

3. APPEARANCE 3. APPEARANCE 3. APPEARANCE LAN Interface LON Interface (SL-9000N option) TMCC Interface (Option) Power Inlet Front Display Rear Display Main Power Switch Keyboard Frame Printer Cover Operation/Speed/ Programming Keyboard CMT/PL-3 Interface Print Head Platter NOTE: To set the speed/operation key sheet, open the keyboard frame and insert the two tabs of the key sheet into the two slots of the keyboard frame bottom. 3- 1

Summary of the content on the page No. 11

4. DISPLAY 4.1 US TYPE 4. DISPLAY 4.1 US TYPE n Front Display Panel SL-9000N x o CAPACITY WEIGHT e=d SCROLLING MESSAGE INDICATES 0 15 lb 0.005 lb SCALE AT ZERO 15 30 lb 0.01 lb n Rear Display Panel SL-9000N CAPACITY WEIGHT e=d SCROLLING MESSAGE INDICATES 0 15 lb 0.005 lb SCALE AT ZERO 15 30 lb 0.01 lb 4- 1

Summary of the content on the page No. 12

4. DISPLAY 4.2 CA/QP TYPE 4.2 CA/QR TYPE n Front Display Panel SL-9000N x o CAPACITY WEIGHT e=d WEIGHT e=d 0 6 kg 0.002 kg 0 15 lbs 0.005 lbs 6 15 kg 0.005 kg 15 30 lbs 0.01 lbs CAPACITÉ n Rear Display Panel SL-9000N CAPACITY WEIGHT e=d WEIGHT e=d 0 6 kg 0.002 kg 0 15 lbs 0.005 lbs 6 15 kg 0.005 kg 15 30 lbs 0.01 lbs CAPACITÉ NOTE: For the SL-9000 model, the model name on the display panel is “SL-9000”. 4- 2

Summary of the content on the page No. 13

5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD 5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD NOTE: Blank keys have no function. Programming Keyboard Function Name of Key Function 1. Clears numeric data just entered. CLEAR 2. Releases the scale from the error mode. Selects the upper case or lower case. SHIFT Calls the PLU # which follows the PLU # currently called. SET NEXT Sets the media transparency on the sensor. Calls the PLU # registered right after currently called PLU #. NEXT PLU Sets “AUTO CODE”. AUTO

Summary of the content on the page No. 14

5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD Name of Key Function 1. Displays the preceding PLU data. 2. Used to set an auto code. 3. Calls the preceding label format # when setting the print position. Moves the cursor to left. Moves the cursor to right. 1. Deletes a character selected by the cursor when setting the commodity name or DELETE message. (A) 1/2 2. Sets a unit price per 1/2 lb. 1. Inserts a space at the cursor position when setting the commodity name or INSERT message. 1 2. Sets a

Summary of the content on the page No. 15

5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBORAD 5.2 OPERATION KEYBOARD AND SPEED KEYBOARD LB/kg (4) (3) NOTES: 1. Pressing the key enables another 108 PLUs assignment. 2. When the initial setting #8-7 is set to 1 (SL-9000) or #28-4 is set to 1 (SL-9000N), the (3) key will function as a Tare% key instead of a speed key. 3. When the initial setting #12-8 is set to 1, the (4) key will function as an AUTO/MANUAL key instead of a speed key. Operation Keyboard Function Name of Key Functi

Summary of the content on the page No. 16

5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBORAD Operation Keyboard Function Name of Key Function Corrects data just after the registration. VOID 1. Selects the speed key page. 2. Selects the function for change Print/OFF. Returns to the main menu. ESC. Accesses print item, auto message timer, print format and issue mode selection PROG. mode. Turns the display on/off when the scale power is on. POWER Changes between 1/2 lb and 1/4 lb (US type only). 1/2 1/4 Changes the unit of measure t

Summary of the content on the page No. 17

6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERATION 1. Ask an authorized installing dealer for the scale installation. Please contact your nearest TOSHIBA TEC representative. 2. Hang the platter arm from the scale. (See page 7-1.) 3. Load the label or receipt. 4. Set the following programming menus: Menu Page ITEM No. Programming Name 2 0 PRINT FORMAT 2 1 DATE/TIME SETTING 1 1 PLU DATA SETTING If necessary, set the following program menu: Menu Page ITEM No

Summary of the content on the page No. 18

7. INSTALLATION PROCEDURE 7. INSTALLATION PROCEDURE 7. INSTALLATION PROCEDURE Scale installation on the wall or ceiling The installation should be an authorized installing dealer. Please contect your nearest TOSHIBA TEC representative. Platter 1. Attach the two platter mount plates to the platter arm with the four D-4x8 screws. Screw Platter Arm Platter Mount Plate 2. Fit the notch of the platter arm on the joint nut of the scale. Joint nut Platter Arm 7- 1

Summary of the content on the page No. 19

8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 1. Open the printer cover and turn the head-up lever to the anticlockwise. 2. Pull out the roll stopper and backing paper stopper, then remove the receipt/label core with the backing paper. You can loosen the backing paper by turning the paper winding shaft anti- clockwise. Receipt/Label Core Roll Stopper Head-up Lever Backing Paper (Labels only) Backing Paper Stop

Summary of the content on the page No. 20

8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL 4. Insert the tip of the receipt/label into the print head. 5. Align the two media guides with the right edge of the receipt/label. Media Guide Media Guide 6. Thread the receipt/label as shown below. NOTE: Labels and receipts should be left-aligned as viewed from the front of the machine, and always threaded in parallel with the media shaft and the print head. Failure to do this may cause a paper jam or a sk


Alternative user manuals
# User manual Category Download
1 Toshiba SL39N User manual Scale 2
2 Toshiba TEC EM1-31064 User manual Scale 1
3 Toshiba TEC EM-31061A User manual Scale 1
4 Toshiba TEC EM1-31015 User manual Scale 1
5 Toshiba SL39N Series User manual Scale 1
6 Toshiba SL-9000 User manual Scale 58
7 Toshiba TEC EM1-31064JE User manual Scale 1
8 Toshiba TEC EM1-31071GE User manual Scale 1
9 Toshiba SL-5300 Series User manual Scale 302
10 Toshiba TEC EM1-31074EE User manual Scale 1
11 Toshiba TEC EM1-31074 User manual Scale 1
12 Toshiba TEC EM1-31059 User manual Scale 1
13 Toshiba TEC EM1-31076 User manual Scale 0
14 Toshiba TEC EM1-31071 User manual Scale 0
15 Toshiba TEC EMl-31055 User manual Scale 1
16 A&D Ej Series Compact Balance EJ-1500 User manual Scale 17
17 A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 User manual Scale 13
18 A&D Ej Series Compact Balance EJ-440 User manual Scale 0
19 A&D FG-150KAL User manual Scale 1
20 A&D Ej Series Compact Balance EJ-2000 User manual Scale 2