DeLonghi HR720B user manual

Summary of the content on the page No. 1

ELECTRIC HEATING CONVECTOR
HR720B
Please retain these instructions for future reference
instr uctions

Summary of the content on the page No. 2

Pilot light Display Thermostat knob Switch A Fig.2 Fig.1 2 HR

Summary of the content on the page No. 3

Thank you for choosing this De’Longhi convector. To get the very best out of your new convector it is advisable to read these instructions before using it. This will ensure that you gain optimum results and use the convector safely. Assembling the feet Fit the feet to the convector as follows: - Insert the foot ensuring that the bigger hole A on the foot coincides with the screw mounted on the base of the convec- tor (see figure 1); then screw in the remaining three screws (see figure 2) which

Summary of the content on the page No. 4

Cleaning and maintenance The convector should not require any maintenance. However before carrying out any cleaning or maintenance, unplug the con- vector from the mains and wait for it to cool (this should take around 5 minutes). It is sufficient to remove external dust with a soft, dry cloth. Never use abrasive powders or solvents. If neces- sary, remove concentrated areas of dirt with a vacuum cleaner. Warnings - Do not use the convector in a bathroom or in the vicinity of bathtubs, wash ba

Summary of the content on the page No. 5

Warning - this appliance Electrical requirements must be earthed Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your Green and Yellow to Earth local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug 13 amp Fuse having a fuse of 13 amp capacity. Should this plug not fit the socket out- lets in your home, it should be cut off and

Summary of the content on the page No. 6

319IDL/09.04