Summary of the content on the page No. 1
HOMEOWNER'S CARE AND
OPERATION INSTRUCTIONS
DIRECT VENT
MULTI-OPEN SERIES
VENTED GAS FIREPLACE HEATERS - DIRECT VENT MODELS
P/N 725,001M REV. F 09/2005
MODELS
CDST (See-through) CDPF (Peninsula)
Ms illivolt Models Electronic Model
CN DST-CMNCN DCL-CMCN DST-CE CDCL-CE
CP DST-CMPCP DCL-CMCP DST-CE CDCL-CE
CN DPF-CMNCN DCR-CMCN DPF-CE CDCR-CE
CP DPF-CMPCP DCR-CMCP DPF-CE CDCR-CE
A French manual is available upon request. Order Form Number
725,001CF.
CDCL (Corner-Left) CDCR (Corner-Right)
Ce manu
Summary of the content on the page No. 2
GENERAL INFORMATION CONGRATULATIONS! Note: Installation and repair should be per- In selecting this SUPERIOR Direct-Vent Gas Appliance you have chosen the finest and formed by a qualified service person. The appli- most dependable fireplace to be found anywhere. It's a beautiful, prestigious alternative ance should be inspected annually by a quali- to a wood burning fireplace. Welcome to a Family of tens of thousands of satisfied fied professional service technician. More fre- SUPERIOR Firepla
Summary of the content on the page No. 3
Do not use these appliances if any part has Carbon Monoxide Poisoning: Early signs of Operation of millivolt and electronic gas con- been under water. Immediately call a qualified, carbon monoxide poisoning are similar to trol systems are different. Before lighting professional service technician to inspect the the flu with headaches, dizziness and/or nau- and operating your appliance determine if sea. If you have these signs, obtain fresh air appliance and to replace any parts of the you have a
Summary of the content on the page No. 4
I O O L I P T O IGNITER it OFF ON CONTROL TPTH TP TH L I P F L F O Note: Clean glass after first two weeks of Variable Flame Height Adjustment Inlet Pressure Port operation. Manifold Pressure Port WARNING: DO NOT USE ABRASIVE CLEANERS. NEVER CLEAN THE GLASS WHEN IT IS HOT. CAUTION: DO NOT TOUCH THE FRONT ENCLOSURE GLASS WITH YOUR HANDS WHILE THE FIREPLACE IS IN USE. Main Gas Maintenance Control Knob The appliance and venting system should be Piezo Ignitor thoroughly inspected before initial use
Summary of the content on the page No. 5
Maintenance Schedule Annually (Before the onset of the Burning Season) Maintenance Task Accomplishing Person Procedure Inspecting/Cleaning Burner, Logs Qualified Service Technician Inspect valve and ensure it is properly operat- ing. Check piping for leaks. Vacuum the con- and Controls trol compartment, fireplace logs and burner area. Check Flame Patterns and Flame Height Qualified Service Technician Refer to Figure 6 on page 7 and verify that the flame pattern and height displayed by the applia
Summary of the content on the page No. 6
Refer to Figure 4 and remove the front glass Burner Adjustments Air Shutter enclosure panel as follows: Adjusting Burner The following paragraphs address burner ad- Rod Air Shutter Venturi justment concerns and procedures. Opening Tube 1. Remove the top louver assembly or radiant panel. Flame Appearance and Sooting Orifice Proper flame appearance is a matter of taste. 2. Open the control compartment access panel. Generally most people prefer the warm glow of To open the control compartment acces
Summary of the content on the page No. 7
Log Placement WARNING: LOG SET GETS VERY HOT AND WILL REMAIN HOT UP TO ONE HOUR AFTER GAS SUPPLY IS TURNED OFF. HANDLE ONLY WHEN LOG SET IS COOL. TURN OFF ALL GAS TO THE APPLIANCE BEFORE INSTALLING THE GRATE AND LOG SET. WARNING: THIS APPLIANCE IS NOT DESIGNED TO BURN WOOD. ANY AT- TEMPT TO DO SO COULD CAUSE IR- REPARABLE DAMAGE TO YOUR APPLI- ANCE AND PROVE HAZARDOUS TO Figure 6 YOUR SAFETY. NOTE: INSTALL REAR BURNER FIRST, BURNER POSITIONING THEN FRONT BURNER. WARNING: THE SIZE AND POSITI
Summary of the content on the page No. 8
TH TH TP TP Electronic Appliance Checkout Electronic Wiring Diagram (Honeywell) Electronic Wiring Diagram (Honeywell) To light the burner, refer to the lighting instruc- Showing the Blower Wiring for the Optional Showing the Blower Wiring for the Optional tions on page 14 and 15. Ensure the ignitor FBK-100 and FBK-200 Kits FBK-250 Kits lights the pilot. The pilot flame should engulf the 1. If any of the original wire as supplied must be replaced, 1. If any of the original wire as supplied must
Summary of the content on the page No. 9
ACCESSORY COMPONENTS Door Frame Kits Two types of decorative door frame kits are available for use with these appliances - one in polished brass finish, the other, in brushed stain- less steel finish. The DFK is designed to attach directly to the front face of the appliance at its extreme edges. The DFK provides a picture frame finish for the appliance. The door frame kit can be Remote Control System (Standard) H0249 RCL retrofitted onto previously installed appliances. Standard Remote Control
Summary of the content on the page No. 10
ACCESSORY COMPONENTS CONTINUED Clean Faced Panel Kit A clean faced panel kit is available to convert the standard louvered appliances to radiant models more suited for finishing around the firebox open- ing with non-combustible materials such as tile. Black Clean Faced Panel Kits CATALOG NO. / MODEL NO. AND NUMBER OF SETS Remote Control System (Deluxe) H0251 RCL-T Deluxe Remote Control System for 24 in. wide for 40 in. wide Unit Glass Door Glass Door (Model RCK-D) Model No. 80L79 80L77 The Model
Summary of the content on the page No. 11
ACCESSORY COMPONENTS CONTINUED Door Frame Kits (2-Piece, Top and Bottom) Two types of decorative door frame kits are avail- able for use with these appliances - one, in pol- ished brass finish; the other, in brushed stainless steel finish. The DTK is designed to attach directly to the front face of the appliance at the glass enclosure panels top and bottom edges. The DTK provides a touch of elegance to the appliance. The door frame kit can be retrofitted onto previously Screen Panel Kit install
Summary of the content on the page No. 12
I O O L I P T O it TPTH TP TH L I P F L F O LIGHTING INSTRUCTIONS – MILLIVOLT GAS VALVE FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A. This appliance has a pilot which must be lighted with a piezo • Do not use any phone in your building. ignitor. When lighting the pilot, follow these instructions • Immediately call your gas supplier from a neighbor’s phone.
Summary of the content on the page No. 13
I O O L I P T O it TPTH TP TH L I P F L F O INSTRUCTIONS D’ALLUMAGE – VANNE GAZ MILLIVOLT POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L’ALLUMAGE AVERTISSEMENT : SI VOUS NE SUIVEZ PAS CES INSTRUCTIONS À LA LETTRE, IL POURRAIT S’EN SUIVRE UN INCENDIE OU UNE EXPLOSION CAUSANT DES DOMMAGES MATÉRIELS, DES BLESSURES CORPORELLES OU MÊME DES PERTES DE VIE. A. Cet appareil est muni d’une veilleuse qui doit être allumée avec un • Appelez immédiatement votre compagnie de gaz en utilisant le téléphone
Summary of the content on the page No. 14
IGNITER OFF ON CONTROL LIGHTING INSTRUCTIONS — ELECTRONIC FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A. When lighting the appliance, follow these instructions • Immediately call your gas supplier from a neighbor’s exactly. phone. • If your gas supplier cannot be reached, call the fire B. BEFORE OPERATING smell all around the appliance area department. for g
Summary of the content on the page No. 15
IGNITER OFF ON CONTROL INSTRUCTIONS D’ALLUMAGE — ELECTRONIC POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L’ALLUMAGE AVERTISSEMENT: SI VOUS NE SUIVEZ PAS CES INSTRUCTIONS À LA LETTRE, IL POURRAIT S’EN SUIVRE UN INCENDIE OU UNE EXPLOSION CAUSANT DES DOMMAGES MATÉRIELS, DES BLESSURES CORPORELLES OU MÊME DES PERTES DE VIE. A. Lorsque vous allumez l’appareil, suivez exactement ces instruc- • Appelez immédiatement votre compagnie de gaz en utilisant tions. le téléphone du voisin. • S’il vous est
Summary of the content on the page No. 16
TROUBLESHOOTING THE MILLIVOLT GAS CONTROL SYSTEM Note: Before troubleshooting, make sure that the appliance main line gas shut-off valve and the gas control valve are in the "OPEN" position and the burner ON/OFF switch is in the “ON” position. Important: Valve system troubleshooting should only be accomplished by a qualified service technician. POSSIBLE CAUSES SYMPTOM CORRECTIVE ACTION A. Defective ignitor 1. Spark ignitor will not light Check for spark at electrode and pilot; if no spark and (
Summary of the content on the page No. 17
TROUBLESHOOTING THE ELECTRONIC IGNITION SYSTEM Note: Before troubleshooting, make sure that the appliance main line gas shut-off valve and the gas control valve are in the "OPEN" position and the burner ON/OFF switch is in the “ON” position. Important: Valve system troubleshooting should only be accomplished by a qualified service technician. SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 1. Burner will not light. A. Faulty Valve System. See Below. B. “OFF/ON” or wall switch Disconnect the two black
Summary of the content on the page No. 18
REPLACEMENT PARTS LIST Natural and Propane NN o. DESCRIPTIO P. art No. Q. ty Q. ty Q. ty Qty CF DSTCL DPCR DC CDC 1. aHZ ood, black - 24 in Le B-91941E n1 on 1 1 1. bHZ ood, black - 40 in L2 B-91941C 2 1 1 2. aUE pper Louver Panel, black - 24 in Le B-92404 n1 on 1 1 2. bUC pper Louver Panel, black - 40 in L2 B-92404 2 1 1 3. aGE lass Enclosure Assembly - 24 in Le B-92534 n1 on 1 1 3. bGC lass Enclosure Assembly - 40 in L2 B-92534 2 1 1 4. aLE ower Louver Panel, black - 24 in Le B-92405 n1 on 1 1
Summary of the content on the page No. 19
REPLACEMENT PARTS LIST GAS CONTROLS — SIT MILLIVOLT Ne atural Propan NN o. DESCRIPTIO P. art No.Q. tyP. art No Qty 3T 0.G1 as Valve - SI 41 3K070 81 8J5301 3r 1.P1 iezo Ignite 11 0K860 11 0K8601 3y 2.P1 ilot Assembl 61 9L170 61 9L1801 3r 3.P1 ilot Generato 61 0J790 61 0J7901 3e 4.T1 hermocoupl 71 4L570 71 4L5701 3e 5.P1 ilot Tub 71 4L560 71 4L5601 3e 6.E1 lectrode And Cabl 71 4L580 71 4L5801 3e 7.O1 rific 62 0J800 12 9L5201 GAS CONTROLS — HONEYWELL ELECTRONIC Ne atural Propan NN o. DESCRIPTIO P.
Summary of the content on the page No. 20
REPLACEMENT PARTS Model CDPF Shown - see table on page 18 and 19 for replacement parts applicable to CDST, CDCR and CDCL Cabinet 7 Firebox 8 6 15 14 12 1b 13a 9 13b 2b 12 3b 10a 10b 17 34 33 16 36 4b 32 5 30 11 31 37 44 42 35 1a 2a 43 3a 40 41 4a 45 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distrib
