DigiPower ACD-100 user manual

Summary of the content on the page No. 1

®

Item No. ACD-100
Universal AC Power Supply

For Use With Digital Cameras


Thank you for purchasing the newest addition to the DIGIPOWER line of Universal
Power Products. Now, you no longer need to purchase many adaptors for your different
products. This one simple Universal Adaptor is easy to use and specifically designed for use
with your Digital Camera. Unlike other AC Adaptors, the ACD-100 changes Voltage and
Amperage with

Summary of the content on the page No. 2

6.5V 6V 5V 4.5V If you have a portable device other than a Digital Camera and would like to use the ACD-100 to power it up, then use the following guidelines: 1. Your device must be rated between 3V and 10V DC and no more than 2.5 Amp (2500mAh) of current. 2. Use the chart below (FIGURE 2) to determine the output current from the ACD-100. 3. The ACD-100’s output current must be equal to or greater than the current your portable device requires. Remember: 1.5Amp = 1500mAh, 2Amp = 20

Summary of the content on the page No. 3

ONE YEAR WARRANTY: Mizco International, Inc. warrants this product to be free from defects in materials and workmanship to the original purchaser for a period of One Year from the original purchase date. Mizco’s responsibility with regard to this limited warranty shall be limited solely to the repair or replacement, at it’s own option, of the ACD-100 which fails during normal use. This warranty does not extend to damage or failure, which results from misuse, neglect, accident, al