Summary of the content on the page No. 1
SMART Board®
800i5 and 800i5-SMP
Interactive whiteboard systems
C o n f i g u r a t i o n a n d u s e r ’ s g u i d e
Read this guide on your smart phone or other mobile device.
Summary of the content on the page No. 2
FCC warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communicatio
Summary of the content on the page No. 3
Important information Before you install and use your SMART Board® 800i5 interactive whiteboard system, read and understand the safety warnings and precautions in this user’s guide and the included warnings document. These safety warnings and precautions describe the safe and correct operation of your interactive whiteboard system and its accessories, helping you to prevent injuries and equipment damage. Ensure that your interactive whiteboard system is always being used correctly. In this docum
Summary of the content on the page No. 4
I M P O R T A N T I N F O R M A T I O N l Two people are required to mount your SMART product because it may be too heavy for one person to safely maneuver. When you lift your interactive whiteboard, you and your assistant should stand on either side of the screen, supporting its weight at the bottom while balancing the top with your other hands. l When mounting the projector boom on a framed or hollow wall, attach both the mounting bracket and the safety tether to a stud to safely support the p
Summary of the content on the page No. 5
I M P O R T A N T I N F O R M A T I O N l You must connect the USB cable that came with your SMART Board interactive whiteboard to a computer that has a USB compliant interface and that bears the USB logo. In addition, the USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid damage to the SMART Board interactive whiteboard. I I M P OR T A N T l Use the SMART Board 880i5 and 885i5 in
Summary of the content on the page No. 6
I M P O R T A N T I N F O R M A T I O N l Viewing 3D content may cause sickness, including nausea, dizziness, headache, eyestrain, blurred vision or numbness. If you experience any of these symptoms, stop viewing 3D content immediately. If these symptoms persist, consult a doctor. l Parents and teachers should monitor children and students for adverse effects resulting from viewing 3D content since children and teenagers may be more susceptible than adults to related health risks. l To avoid adv
Summary of the content on the page No. 7
I M P O R T A N T I N F O R M A T I O N l There are no projector menu options on the ECP. Keep your remote control in a safe place because the ECP is not a substitute for the remote control. l Do not disconnect cables from the ECP to connect peripheral devices because you could disconnect controls for your interactive whiteboard. l Disconnect the product from its power source when it’s not used for a long period. Cleaning C C A U T I ON l Before you clean the projector, press the Power button
Summary of the content on the page No. 8
I M P O R T A N T I N F O R M A T I O N Service W W A R N I N G l There are no user-serviceable parts inside the pen tray. Only qualified personnel should disassemble the pen tray’s printed circuit boards, and this procedure must be done with proper electrostatic discharge (ESD) protection. C C A U T I ON l Do not adjust any settings in the service menu other than those listed in the following procedures. Changing other settings might damage or affect the operation of your projector and may
Summary of the content on the page No. 9
I M P O R T A N T I N F O R M A T I O N Environmental requirements Before you install your SMART Board 800i5 interactive whiteboard system, review the following environmental requirements. Environmental Parameter requirement Operating temperature 41°F to 95°F (5°C to 35°C) from 0' to 6000' (0 m to 1800 m) l 41°F to 86°F (5°C to 30°C) from 6000' to 9800' (1800 m to 3000 m) l Storage temperature -40°F to 122°F (-40°C to 50°C) l Humidity 30% to 80% relative humidity, non-condensing l Water and flui
Summary of the content on the page No. 10
Summary of the content on the page No. 11
Contents Important information i Safety warnings, cautions and important information i Environmental requirements vii Chapter 1: About your interactive whiteboard system 1 SMART Board 800i5 interactive whiteboard system features 2 Included accessories 4 Optional accessories 6 Chapter 2: Installing your interactive whiteboard system 7 Choosing a location 7 Choosing a height 8 Securing your interactive whiteboard system 9 Routing the cables 9 Installing SMART software 10 Chapter 3: Using your inte
Summary of the content on the page No. 12
C O N T E N T S Accessing the service menu 57 Transporting your interactive whiteboard system 59 Appendix A: Remotely managing your system through a network interface 61 Web page management 61 Simple Network Management Protocol (SNMP) 69 Appendix B: Remotely managing your system through an RS-232 serial interface 71 Connecting your room control system to the ECP 71 Projector programming commands 73 Appendix C: Remote control code definitions 85 Appendix D: Hardware environmental compliance 87 Wa
Summary of the content on the page No. 13
Chapter 1 Chapter 1: About your interactive whiteboard system SMART Board 800i5 interactive whiteboard system features 2 SMART Board 800 series interactive whiteboard 2 SMART UF75 or SMART UF75w projector 3 Extended Control Panel (ECP) 4 Included accessories 4 Remote control 4 Pens 4 Eraser 5 VGA connection kit 5 SMART Board 800i5 interactive whiteboard system accessories 5 RCA connector pod 5 SMART Board 800i5-SMP interactive whiteboard system accessories 5 SMART GoWire™ auto-launch cable 5 CAT
Summary of the content on the page No. 14
C H A P T E R 1 About your interactive whiteboard system SMART Board 800i5 interactive whiteboard system features Your SMART Board 800i5 interactive whiteboard system uses the short-throw, high-offset SMART UF75 or SMART UF75w projector. The throw distance of the SMART UF75 or SMART UF75w projectors is half that of the SMART UF65 projector, resulting in a shorter boom and reduced shadows on the projected image. When the projector displays an image from your computer on the touch-sensitive intera
Summary of the content on the page No. 15
C H A P T E R 1 About your interactive whiteboard system Other features of your interactive whiteboard include: l A modular pen tray that automatically detects when you pick up a pen tray pen or the eraser l Pen tray buttons that activate the pens’ colors and the on-screen keyboard, right-click, Orientation and Help functions l A durable hard-coated surface that is optimized for projection and easily cleaned l A security cable lock feature that enables you to lock your interactive whiteboard to
Summary of the content on the page No. 16
C H A P T E R 1 About your interactive whiteboard system l An alert broadcast feature that enables administrators to send notification messages to network-connected projector systems for immediate on-screen display l DLP Link™ technology that ensures compatibility with the emerging 3D content ecosystem l Protected cable routing through a cable cover that limits tampering and clutter l A secure mounting and installation system that includes the following: o An optional projector padlock ring to p
Summary of the content on the page No. 17
C H A P T E R 1 About your interactive whiteboard system Eraser The eraser resembles a rectangular chalkboard eraser. You can use a substitute object, as long as it has a similar shape, reflects infrared light and doesn’t scratch or mark the interactive whiteboard surface. VGA connection kit The VGA connection kit allows you to connect a laptop to your interactive whiteboard system using a VGA cable. The end of the VGA connection kit can be attached to either side of the interactive whiteboard o
Summary of the content on the page No. 18
C H A P T E R 1 About your interactive whiteboard system If you are using a laptop that doesn’t have SMART Meeting Pro software installed, connect the laptop to the interactive whiteboard using your SMART GoWire cable. The SMART Meeting Pro icon appears in the notification area on your laptop once you connect the cable. CAT 5 USB extender The CAT 5 USB extender (Part No. SBX8- CAT5-XT) enables you to connect your interactive whiteboard to a computer up to 50' (15 m) away using a Cat 5, Cat 5e or
Summary of the content on the page No. 19
Chapter 2 Chapter 2: Installing your interactive whiteboard system Choosing a location 7 Choosing a height 8 Securing your interactive whiteboard system 9 Locking the pen tray to your interactive whiteboard 9 Securing the projector to the boom 9 Routing the cables 9 Installing SMART software 10 Consult the SMART Board 800i5 interactive whiteboard system installation document included with your product for instructions on how to install your product. I I M P OR T A N T Use the SMART Board 880i5
Summary of the content on the page No. 20
C H A P T E R 2 Installing your interactive whiteboard system best presentation alignment, mount your interactive whiteboard system in a location that’s central to your audience’s viewing direction. For mobile or adjustable installation options, contact your authorized SMART reseller. W W A R N I N G l Refer to your interactive whiteboard system’s specifications (available at smarttech.com/support) for its weight. Check your local building codes to ensure that your wall can support this weight
