Summary of the content on the page No. 1
SANTO 70322 KG
Electronic Refrigerator/Freezer
Operating Instructions
818 35 28-00/2
Summary of the content on the page No. 2
Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Notes which are important for your safety or for the proper function- 1 ing of the appliance are stressed with a warning triangle and/or with signal words
Summary of the content on the page No. 3
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appliance Transport . . . . . . . . . . . . .
Summary of the content on the page No. 4
Contents Control and Information Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 "Open Door"-Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Function Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Opening the Freezer Compartment Door . . . . . .
Summary of the content on the page No. 5
1 Important Safety Instructions These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Prior to Installation • Check the refrigerator/freezer for transport damage. Under no circumstances should a damaged appliance be installed! In the event of damage, please contact yo
Summary of the content on the page No. 6
Important Safety Instructions If the refrigerant circuit should become damaged: – avoid open flames and sources of ignition; – thoroughly ventilate the room in which the appliance is situated. Child Safety Do not allow children to tamper with the controls or play with the product. Keep packaging material away from children! (There is a risk of suffocation!) During Use This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs only. It is not i
Summary of the content on the page No. 7
Environmental Information Packaging All transit packaging materials are environmentally compatible and can be reused. Wood is un-treated. The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are pure hydrocarbon compounds and can be recycled. The carton parts are made from recycled paper. Please dispose of the packaging with due care for the environment. Old A
Summary of the content on the page No. 8
2. In order to push the appliance into its final position, press carefully at the top of the door and tip the appliance back slightly. The weight is thus transferred to the back wheels and the appliance can be easily pushed. Before Use Packaging 0 1. Remove all adhesive tape and packaging from the interior of the appli- ance. Any remnants of adhesive can be removed with white spirit. 3 2. Remove the transport protection pieces and pull off the adhesive tape. 3. Wash the inside of the app
Summary of the content on the page No. 9
Remove the transport fittings from the storage shelves: 4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf. 5. Slide the storage shelf far enough forward so that it can be hinged downwards and the fittings can be removed from the guides. 818 35 28-00/2 9
Summary of the content on the page No. 10
Installation Installation Location The appliance should be installed in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperature. The appliance should therefore – not be exposed to direct sunlight; – not be installed next to radiators, cookers or other sources of heat; – only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed. The climate classifica
Summary of the content on the page No. 11
Installation The refrigerator/freezer needs ventilation Air is fed under the door through the vent slots in the base and is exhausted upwards along the back wall. To ensure proper air circulation never cover or alter the vent openings. Important! If the appliance is installed under a hanging cabinet, a clearance of at least 10 cm between the top of the appliance and the cabinet above it must be maintained. Please check whether, after installing your appliance and especially after reve
Summary of the content on the page No. 12
Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED 1 The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left. The appliance is supplied with a 13 amp pl
Summary of the content on the page No. 13
Reversing The Door The door hinges can be changed from right (as supplied) to left if required to suit the location where the appliance is installed. Warning! Unplug from the mains, before reversing the door. 1 0 1. Open the freezer compartment door and remove the plinth to the front. Move the door bearing cover on the plinth from the left to the right. 2. Close the freezer compartment door. Open the fridge compart- ment door and unscrew the retaining screw for the self-clos- ing mec
Summary of the content on the page No. 14
Reversing The Door 5. Unscrew the centre door bearing. 6. Remove the fridge compartment door carefully to the front and place on one side. 7. Unscrew the retaining screw for the self-closing mechanism on the bottom of the fridge compart- ment door. 8. Move the upper bearing pivot to the left. 9. Push the cover on the door handle to the left and remove it by bring- ing it towards you. 10. Unscrew the door handle, turn it 180° and screw it back on to the right-hand side of the door. 14
Summary of the content on the page No. 15
Reversing The Door 11. Replace the cover for the door handle and push it towards the left as far as it will go. 12. Fasten the self-closing mechanism to the bottom left of the fridge compartment door. 13. Carefully slide the fridge com- partment door onto the top bear- ing pivot and close. 14. Slide the centre door bearing into the bottom left of the fridge com- partment door and fasten to the housing. 818 35 28-00/2 15
Summary of the content on the page No. 16
Reversing The Door 15. Fasten the self-closing mechanism on the top left of the freezer compartment door. 16. Carefully slide the freezer com- partment door onto the centre bearing pivot and close. 17. Place the lower door bearing with the bearing pivot in the lower left of the freezer compartment door and fasten. 18. Open the freezer compartment door and fit the plinth. 16 818 35 28-00/2
Summary of the content on the page No. 17
Appliance Description View of Appliance á Control panel à Butter and cheese compartment with lid â Door storage compartments ä Bottle compartment ã Fruit and vegetable drawers å Bottle rack ç Shelves é Freezer drawer (only for storage) When defrosting the bottom drawer also serves as a water collecting vessel. è Freezer drawer (for storage and freezing) ê Rating plate 818 35 28-00/2 17
Summary of the content on the page No. 18
Appliance Description Cold Accumulation Block A cold accumulation block is enclosed with the appliance. In the event of power failure or a malfunction of the appliance, the 3 cold accumulation block will increase the hold over period by several hours. The cold accumulation block will be most effective when placed at the front of the upper freezer tray. When defrosting the appliance place the cold accumulation block on top of the frozen food to keep it cold. The block may also be used in a
Summary of the content on the page No. 19
Appliance Description Control Panel 1 ON/OFF button and ON/OFF indicator light (green) 2 Temperature display for refrigerator 3 Temperature setting buttons for refrigerator 4 COOLMATIC button and COOLMATIC indicator light (yellow) COOLMATIC for intensive cooling in the refrigerator 5 FROSTMATIC button and FROSTMATIC indicator light (yellow) FROSTMATIC for fast freezing in the freezer compartment 6 Temperature display for freezer compartment 7 Temperature setting buttons for
Summary of the content on the page No. 20
Appliance Description Temperature setting buttons The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons. These buttons are connected to the temperature display. The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the dis- play of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER). Each time one of the two buttons is pressed agai
