Our goal is to provide you with a quick access to the content of the user manual for Motorola Cell Phone 2.1. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Motorola Cell Phone 2.1.
If looking through the Motorola Cell Phone 2.1 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Motorola Cell Phone 2.1 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Motorola Cell Phone 2.1. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
for the Motorola Q Phone
VSuite 2.1 User Guide July 2007 Copyright 2005, 2007Voice Signal Technologies, Inc. All rights reserved. No part of this manual may be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval systems, without the express written consent of Voice Signal Technologies, Inc. The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed
VSuite 2.1 User Guide Table of Contents TM ABOUT VSUITE 2.1 .......................................................................................4 STARTING VSUITE...........................................................................................5 CALLING A NAME OR NUMBER..................................................................6 SENDING A TEXT MESSAGE.........................................................................8 LOOKING UP A CONTACT............................
VoiceSignal 2.1 User Guide TM About VSuite 2.1 TM VSuite 2.1 by VoiceSignal is an exciting upgrade to the VSuite 1.3 voice recognition application for wireless handsets and devices. VSuite 2.1 offers new features, even better performance, and access to a wide variety of voice-enabled dialing and application services. VSuite 2.1 includes the following features: • The Call command provides natural, one-step commands for placing calls to contact names or numbers. For example, you could s
VSuite 2.1 User Guide Starting VSuite To start VSuite 2.1, you can either: Press and hold the SpeakerPhone Key or… From the Start menu, select Voice Recognition VSuite prompts you to “Say a command” and displays the available commands at the bottom of the screen. Note: When you first start VSuite, it voice-activates the names stored in your contact list. If you have a large number of contacts, you might see the following message while VSuite is reading yo
VSuite 2.1 User Guide Calling a Name or Number Use the Call command to place a call. If the number you want to call is stored in your contact list, you can say the contact name and, optionally, which number (home, mobile, etc.) you want to call. If the number is not in your contact list, you can say the number itself. To call a name or number: 1. Start VSuite. You hear “Say a command.” 2. Say “Call” or… Say “Call” followed by the name of a person in your contact list, and optionally,
VSuite 2.1 User Guide To confirm a name or number, wait for the beep and then say “Yes.” You can also choose the correct name or number from the choice list using the phone’s arrow keys. For information on customizing the behavior of choice lists, see the appendix, “VSuite Settings.” Hints for using Call: • Wait for the beep before saying the command. • When saying a name, speak clearly and say the name of a person in your contact list, first name followed by last name. • If you s
VSuite 2.1 User Guide Sending a Text Message Use the Send Text command to address a text message to any number stored in your contact list or to a specified number. To call a name or number: 1. Start VSuite. You hear “Say a command.” 2. Say “Send Text” followed immediately by the name of a person in your contact list or a valid telephone number. 3. After you say a name or number, you might be prompted, “Did you say, ‘Send Text to…?’” followed by the first of up to three names or
VSuite 2.1 User Guide Looking Up a Contact Use the Lookup command to look up contact information for any person stored in your contact list. To look up contact information: 1. Start VSuite. You hear “Say a command.” 2. Say “Lookup” followed by the name of a person in your contact list. Examples Lookup Angela Martinez Lookup Tom Stewart 3. After you say a name, you might be prompted “Did you say, ‘Lookup…?’” followed by the first of up to three names. To confirm a name, wait f
VSuite 2.1 User Guide Opening an Application Use the “Open” command to open an application on your device. To open an application or access a menu: 1. Start VSuite. You hear “Say a command.” 2. Say “Open” or… Say “Open” followed by the application you want to open. Examples Open (To see a list of applications you can open) Open Calendar (etc.) Hints for using Open: • Wait for the beep before saying the command. • To see a list of applications/menu items you can open, say “O
VSuite 2.1 User Guide Appendix: VSuite Settings You can customize the behavior of the VSuite application using the VSuite Settings menu. To access the menu, start VSuite and then select the Settings soft key. Choice Lists If VSuite is not absolutely confident that it has correctly identified a name or number, it can display a choice list of up to three possibilities, and prompt you to confirm the correct one. You can control when choice lists appear by changing the
VSuite 2.1 User Guide Digit Dialing Use the Digit Dialing menu to adapt digit dialing to your voice. Note: Only adapt digit dialing if the phone is having consistent difficulty recognizing numbers when you use the Call command. Lets you adapt digits, which can improve Adapt Digits voice recognition of phone numbers. Adaptation takes about 60 seconds. Erases any digit adaptation you have done and resets digit recognition to the factory Reset Digits default. If you have not adapted
VSuite 2.1 User Guide Sound You can customize the VSuite user interface by turning playback on or off for prompts, names, and numbers. You can also change the speed and volume of name playback. When you first start using the VSuite application, it is recommended that you leave playback of prompts on. Once you are familiar with the application, you can turn playback of prompts off for faster voice dialing and voice control of applications. Turns playback on or off for prompts such as
VSuite 2.1 User Guide Contacts Update When you first start VSuite, it voice-activates all the names that it finds in your contact list. If you have added or changed contacts since the last time you used VSuite, it automatically re-activates the entire list of names. If you never want to wait for the application to update names, you can configure VSuite to turn off automatic contacts update. This allows you to update the list manually at your convenience. Lets you set Contacts Update to
|1||Motorola 210004||Cell Phone||21|
|2||Motorola 500||Cell Phone||41|
|3||Motorola 60g||Cell Phone||25|
|4||Motorola 3152359||Cell Phone||32|
|5||Motorola 2200||Cell Phone||87|