Summary of the content on the page No. 1
Nokia C2-03/C2-06 User Guide
Issue 1.3
Summary of the content on the page No. 2
2Contents Messaging 19 Contents Send a message 19 Retrieve a multimedia message 20 Safety 4 Listen to voice messages 21 Send an audio message 21 Get started 5 Your dual SIM phone 5 Personalise your phone 21 Keys and parts 5 About the home screen 21 Insert a SIM card and battery 6 Personalise the home screen 22 Insert a second SIM card 7 Personalise your phone tones 22 Insert a memory card 8 Time management 23 Charge the battery 9 Change the time and date 23 Attach a strap 10 Switch the phone on
Summary of the content on the page No. 3
Contents 3 Send a mail 32 Read and reply to mail 32 About Chat 32 Chat with your friends 32 Maps 33 About Maps 33 View your current location on the map 34 Find a place 34 Share your location or a place 34 Create a walking route 35 Nokia's Ovi services 35 Availability and costs of Nokia's Ovi services 35 Access Nokia's Ovi services 35 Find help 35 Support 35 Keep your phone up to date 36 Nokia original accessories 38 Practical rules about accessories 38 Battery 39 Product and safety information 3
Summary of the content on the page No. 4
4Safety Safety Read these simple guidelines. Not following them may be dangerous or illegal. For further information, read the complete user guide. SWITCH OFF IN RESTRICTED AREAS Switch the device off when mobile phone use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free
Summary of the content on the page No. 5
Get started 5 Get started Your dual SIM phone You can insert two SIM cards. Some benefits of a dual SIM phone • You can make savings when you use services from different service providers. • Use one phone number for personal calls and another for work, but carry only one phone. • Avoid network coverage variation between service providers. Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other is una
Summary of the content on the page No. 6
6 Get started 2 Call key 3 Keypad 4 Earpiece 5 Wrist strap hole 6 Volume up/Zoom in key 7 Volume down/Zoom out key 8 Key lock switch 9 End/Power key 10 Microphone 11 Nokia AV Connector (3.5 mm) 12 Micro-USB connector 13 Charger connector 14 Camera lens. Before using the camera, remove the protective tape from the lens. 15 Loudspeaker 16 SIM card slot (SIM 2) To switch between SIM cards, on the home screen, press and hold *. Insert a SIM card and battery Note: Switch the device off and disconnect
Summary of the content on the page No. 7
Get started 7 2 Open the SIM card holder (3), and insert or remove the SIM card (4 or 5). Make sure the contact area of the card is facing down. 3 Line up the contacts of the battery and the battery compartment, and insert the battery (6). To replace the back cover, direct the bottom locking catches toward their slots (7), and press down until the cover locks into place (8). Insert a second SIM card Have a second SIM card, but want to keep using your main SIM card? You can insert or remove a sec
Summary of the content on the page No. 8
8 Get started 1 Open the cover of the external SIM card slot, marked with . 2 Make sure the contact area of the card is facing up, and insert the SIM card. Push the card in, until it locks into place. Close the cover. Remove the second SIM card Insert a memory card Use only compatible memory cards approved by Nokia for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Your phone supports memory cards with a capacity of up to 32 GB.
Summary of the content on the page No. 9
Get started 9 1 Switch the phone off, and remove the back cover and battery. 2 To release the memory card holder, slide the holder in the direction indicated by the arrow on the holder. Lift the memory card holder (1). 3 Insert a compatible memory card. Make sure the contact area of the card is facing down (2). 4 Lower the memory card holder (3). 5 To lock the memory card holder, slide the holder to its original position (4). Remove the memory card 1 Switch the phone off. 2 Remove the back cover
Summary of the content on the page No. 10
10 Get started 1 Connect the charger to a wall outlet. 2 Connect the charger to the phone. 3 When the phone indicates a full charge, disconnect the charger from the phone, then from the wall outlet. You do not need to charge the battery for a specific length of time, and you can use the phone while it is charging. If the battery is completely discharged, it may take several minutes before the charging indicator is displayed or before any calls can be made. If the battery has not been used for a
Summary of the content on the page No. 11
Basic use 11 You may be prompted to get the configuration settings from your network service provider. For more information on this network service, contact your network service provider. GSM antenna The antenna area is highlighted. Avoid touching the antenna area while the antenna is in use. Contact with antennas affects the communication quality and may reduce battery life due to higher power level during operation. Basic use Access codes PIN or PIN2 code These protect your SIM card against un
Summary of the content on the page No. 12
12 Basic use (4-8 digits) You can set your device to ask for the PIN code when you switch it on. If not supplied with your SIM card or you forget the codes, contact your service provider. If you enter the code incorrectly three times in a row, you need to unblock the code with the PUK or PUK2 code. PUK or PUK2 code These are required to unblock a PIN or PIN2 code. (8 digits) If not supplied with your SIM card, contact your service provider. IMEI number This is used to identify valid devices in t
Summary of the content on the page No. 13
Basic use 13 SIM2 — Use the SIM card in the external SIM card slot as the default SIM card to make a call, send a message, or transfer mobile data. Rename a SIM card Select and hold SIM1 or SIM2, and from the pop-up menu, select Rename. Tip: To open the SIM manager from the home screen, press and hold *. Lock or unlock the keys and screen To avoid accidentally making a call when your phone is in your pocket or bag, lock the keys and screen of your phone. Slide the key lock switch. Tip: If the
Summary of the content on the page No. 14
14 Basic use Swipe Place a finger on the screen, and steadily slide your finger in the desired direction. Swipe to open an application or activate a feature You can open applications or activate features when you swipe left or right on the home screen. Assign a function or feature to a swipe action Select Menu > Settings > My shortcuts > Swipe gesture, and select the swipe direction and desired function or feature. Indicators You have unread messages sent to SIM1. You have unread messages sent t
Summary of the content on the page No. 15
Basic use 15 The phone does not ring for incoming calls or text messages. An alarm is set. or The phone is registered to the GPRS or EGPRS network using SIM1. The phone is registered to the GPRS or EGPRS network using SIM2. or A GPRS or EGPRS connection from SIM1 is open. or A GPRS or EGPRS connection from SIM2 is open. or The GPRS or EGPRS connection from SIM1 is suspended (on hold) . or or The GPRS or EGPRS connection from SIM2 is suspended (on hold). Bluetooth is activated. If you h
Summary of the content on the page No. 16
16 Calls 6 If the other phone requires a passcode, enter the passcode. The passcode, which you can define yourself, must be entered in both phones. The passcode in some phones is fixed. For details, see the user guide of the other phone. The passcode is valid only for the current connection. 7 If prompted, allow connection and copying requests. Change the volume of a call, song, or video Use the volume keys. The built-in loudspeaker allows you to speak and listen from a short distance without ha
Summary of the content on the page No. 17
Contacts 17 View your missed calls Want to see who made the call you missed? On the home screen, select View. The caller's name is displayed, if stored in the contacts list. Missed and received calls are logged only if supported by the network, and the phone is switched on and within the network service area. Call back the contact or number Go to the contact or number, and press the call key. View the missed calls later Select Menu > Contacts > Log and Missed calls. Contacts Save a name and phon
Summary of the content on the page No. 18
18 Write text Remove or change a phone number assigned to a number key Select and hold the number key, and from the pop-up menu, select Delete or Change. Make a call On the home screen, press and hold a number key. Deactivate speed dialling Select Menu > Settings and Call > Speed dialling. Write text Switch between text input modes When writing text, you can use traditional or predictive text input. , , and indicate the character cases. indicates that number mode is activated. Activate or de
Summary of the content on the page No. 19
Messaging 19 The available characters depend on the selected writing language. Move the cursor Select or , or tap where you want to place the cursor. Insert a common punctuation mark Press 1 repeatedly. Insert a special character Select and the desired character. Insert a space Press 0. Use predictive text input Write using predictive text input The built-in dictionary suggests words as you select the number keys. 1 Select each number key (2–9) once for each character. 2 To find the desired wo
Summary of the content on the page No. 20
20 Messaging 1Select Create message. 2 To add an attachment , select Options > Insert object. 3 Write your message, and select Continue. 4 To enter a phone number or mail address manually, select Number or mail. Enter a phone number, or select Mail, and enter a mail address. 5Select Send. If prompted, select the SIM card to use. Tip: To insert a special character or smiley, select Options > Insert symbol. Sending a message with an attachment may be more expensive than sending a normal text messa
