Our goal is to provide you with a quick access to the content of the user manual for Nokia COMMUNICATOR 9110. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Nokia COMMUNICATOR 9110.
If looking through the Nokia COMMUNICATOR 9110 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Nokia COMMUNICATOR 9110 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Nokia COMMUNICATOR 9110. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Nokia 9110 Communicator
Quick Guide For Infrared printing
INFRARED PRINTING AND NOKIA 9110 COMMUNICATOR
The Nokia 9110 Communicator can print to various printers with infrared. This Quick Guide shows two
examples. The first is printing with Canon printer models BJC-50 or BJC-80. The second is by using
infrared printing adaptors, such as from Extended Systems and ActiSys.
First of all you may need to install a new printer driver. See the advice in quick guide “Parallel printing
6. click install and wait until the Operation In Progress dialogue box is finished. You may install other drivers as needed, then disconnect the Nokia 9110 Communicator from the PC. Note: You may also install drivers to the communicator using Nokia Server software. 2. Correct settings for the Nokia 9110 Communicator The Nokia 9110 Communicator printing connection type must be set to infrared. From System application, select Settings: Change Print settings and select Connection type to be Inf
CANON BJC-50 and BJC-80 PRINTERS 9110 can print to the Canon printer models Canon BJC-50 and Canon BJC-80. Ensure that you have setup the printer according to the instructions supplied with the Canon printer model. Follow the earlier instructions for how to setup the communicator for the first time. Printing to the Canon printer from Nokia 9110 Communicator To make your first test print, select Notes application and write a note with a few words or sentences. Or open a fax that you have receive
QUESTIONS AND ANSWERS FOR CANON BJC-50 AND CANON BJC-80 Q: Which driver should I install to my 9110 ? A: Canon BJC-70, or Canon BJC-50/70/80. Q: Can I print using Nokia 9000/i Communicators ? A: No. Nokia 9000/i Communicators are not compatible with Canon BJC-50 and Canon BJC-80 printers. Q: Communicator can’ t establish the infrared connection to the printer A: - Check that printer is on, and paper is inserted. - Check that 9110 connection type is infrared in the print setting – see Correct s
INFRARED PRINTING ADAPTERS 9110 can print to printers using adapters supplied by Extended Systems and ActiSys – see the Solutions Guide supplied with your 9110 from more information on the products. Ensure that you have setup the printer according to the instructions supplied with adapter. Follow the earlier instructions for how to setup the communicator for the first time. Printing to the printer from Nokia 9110 Communicator To make your first test print, select Notes application and write a n
The contents of this document is provided "as is". Except as required by the applicable law, no warranty of any kind, either express or implied, is made in relation to the accuracy, reliability or content of the document. Nokia reserves the right to revise the document or withdraw it at any time without prior notice. Nokia is not responsible for any lost of data, income or any consequental damage howsoever caused. Copyright 1995 – 1999 Nokia. All right reserved. 6(6)
|1||Nokia 002P132||Cell Phone||26|
|2||Nokia 103||Cell Phone||92|
|3||Nokia 1006||Cell Phone||75|
|4||Nokia 1101||Cell Phone||46|
|5||Nokia 101||Cell Phone||69|