Vision Fitness T9400HRT user manual

Summary of the content on the page No. 1

Assembly
Guide
T9200, T9300, T9400HRT, T9500HRT,
T9600HRT, T9700HRT, & T9700S
PLATFORM TREADMILLS

Summary of the content on the page No. 2

T9200 T9400HRT T9600HRT T9300 T9500HRT T9700HRT T9700S platform treadmills To avoid possible damage to this Platform Treadmill, please follow these assembly steps in the correct order. Before proceeding though, find your new Platform Treadmill’s serial number, located on the underside of the main frame, and enter here: Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using you

Summary of the content on the page No. 3

TOOLS & PARTS INCLUDED MM 8 Allen Wrench MM 5 Allen Wrench Screwdriver PARTS BOX Water Bottle, Qty: 1 Optional Heart Rate Chest Strap, Qty: 1 (T9400HRT, T9500HRT, T9600HRT, T9700HRT, & T9700S only) Color-coded Hardware Bags Owner’s Guide Assembly Guide Warranty Card

Summary of the content on the page No. 4

HARDWARE INCLUDED BLUE BAG ORANGE BAG M8 x 20L Bolts M8 x 20L Flathead Bolts Quantity: 2 Quantity: 4 M8 x 50L Bolts Quantity: 4 M8 x 135L Bolts Quantity: 4

Summary of the content on the page No. 5

STEP 1 ORANGE BAG • Slide the rubber covers on to the left & right console supports, making sure that the lower cutout is facing inward. • Insert one of the console supports into the console support bracket and secure with two bolts (M8 x 20L) in the side of the console support bracket. STEP • Insert one bolt (M8 x 20L) in the 1 rear of the console support bracket. • Tighten all three bolts with the blue- MM handled 5 Allen wrench. • Repeat this on the opposite side. NOTE: The right console su

Summary of the content on the page No. 6

STEP 2 BLUE BAG MODELS T9700HRT & T9700S: Slide the data cables down the right console support using the white wire tie as a guide. Make sure that the data cable (one large ribbon cable) goes through the large hole in the lower part of the console upright. MODELS T9600HRT & T9500HRT: Slide the data cables down the right console support using the white wire tie as a guide. Make sure that the data cables (1 small & 1 large telephone style cable) go through the large hole in the lower part of the

Summary of the content on the page No. 7

STEP 3 DATA CABLES STEP 3 MODELS T9200, T9300, T9400HRT, T9500HRT, T9600HRT: Plug in the small data cable into the small plug connection on the lower control board. Plug in the large data cable into the large plug connection on the lower control board. MODELS T9700HRT & T9700S: Plug the large 20 ribbon cable into the 20 pin connection on the lower control board. Slide down the rubber covers on the left & right console supports. • Install the motor cover making sure that the rubber covers are ins

Summary of the content on the page No. 8

STEP 4 BELT TENSION STEP 4 • If the running belt slips when used, MM use the supplied 8 Allen wrench to turn the left and right tension bolts 1 clockwise /4-turn at a time until the belt no longer slips. • If the running belt is too far to the MM right side, use the supplied 8 Allen wrench to turn the right tension bolt 1 clockwise /4-turn at a time until the belt remains centered during use. If the running belt is too far to the left side, turn the left tension bolt 1 clockwise /4-turn at a ti