Uniden DCX 490 user manual

Summary of the content on the page No. 1

UZ624BT (DCX490) 9/17/01 11:48 AM Page 1

Summary of the content on the page No. 2

UZ624BT (DCX490) 9/17/01 11:48 AM Page 2 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. Your DCX 490 will work with the following units: DCT 4960 DCT 4960-2 DCT 4980 Charger Cordless Handset Battery pack AC adapter Beltclip (AD-490) (BP-490) Uniden Parts Department at (800) 554-3988 Hours: M-F 7:00 a.m. to 5:00 p.m. CST. We can also be reached on the web at www.uni

Summary of the content on the page No. 3

UZ624BT (DCX490) 9/17/01 11:48 AM Page 3 Install the battery pack Charge the battery pack for at least 12-15 hours before plugging the phone line into your phone. Press in on the battery cover 1 release and slide the cover down until it comes off. Connect the battery pack 2 connector observing the correct polarity (black and red wires) to the jack inside the battery compartment. Do not exert any force on this connection. It could cause damage to the battery or to the handset. The plastic conn

Summary of the content on the page No. 4

UZ624BT (DCX490) 9/17/01 11:48 AM Page 4 Battery use time (per charge) Fully charged • 6 hours continuous use • 3 days when the handset is in the standby mode Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. “BATT” appears on the display and you will hear a beep. If the phone is in use, “BATT” appears on the display and the handset beeps twice. Complete your conversation as quickly as possible a

Summary of the content on the page No. 5

UZ624BT (DCX490) 9/17/01 11:48 AM Page 5 To set up additional handsets Follow the simple steps to register your new additional handset. Check that the phone is not in use (including the intercom), 1 and make sure that the handset is not in the base unit. Press and hold the find handset key on the base 2 for 5 seconds. - The charge/voice mail LED will start flashing to tell you that the system is in the registration mode. Place the NEW (the 3rd) handset in the charging cradle of the 3 base un

Summary of the content on the page No. 6

UZ624BT (DCX490) 9/17/01 11:48 AM Page 6 Changing the Digital Security Code The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary unless you are replacing an extra handset. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. Your DCT 4960-2 has the capability of expanding to 4 handsets. In any event that a handset is lost or damaged,

Summary of the content on the page No. 7

UZ624BT (DCX490) 9/17/01 11:48 AM Page 7 One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further ef

Summary of the content on the page No. 8

UZ624BT (DCX490) 9/17/01 11:48 AM Page 8 Printed in China 381-000805