Summary of the content on the page No. 1
Fuzzy Computerized Automatic
Washing Machine
User's manual
This manual is for
XQB55-10H
Special number:0030506875
Please read this manual
carefully before using.
Retain it for future reference.
Summary of the content on the page No. 2
Contents Names of the parts................................................................................................1 Safety precautions ............................................................................................. 2 Installation and adjustment ...................................................................................4 Preparation before washing .................................................................................8 Put in the laundries ................
Summary of the content on the page No. 3
Names of the parts Before Using Before Using Top lid A Sop mat Water valve Top lid B Cabinet handle Detergent box Drain hose Filter cover Control panel Inner tub Power line Pulsator Control panel film Cabinet back cover Adjustable foot base frame fixed foot (3) Meaning and description of the symbols Contents marked with that symbol are related to the safety Warning sign of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwis
Summary of the content on the page No. 4
Safety precautions Before Using Before Using The power cord plug should be convenient Please plug the plug on special 220V /10A to be pluged in or pluged out with hand receptacle.Be sure to use single-phase while the washing machine runs normally. three pins receptacle.Ensurethe earthing Be sure to pull the plug out and close the prong of the power receptacle is earthed water tap when the machine is idle,when reliably.Use leakage protector if possible. moving the machine,or when cleanin
Summary of the content on the page No. 5
Safety precautions Before Using Before Using Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children.Do not let the children climb the washing machine. Do not put any hot or heavy items (such Do not wash laundries with volatile as the kettle with hot water ) on the materials (such as thinner, petrol etc.) washing machine. The handicapped or chil
Summary of the content on the page No. 6
Before Using Before Using Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Install the bottom plate After you open the package, please lean 1.Press downward to assmble. the washing machine gently down on soft 2.Pull upward to detach. items ( like the towel cloth,blanket, etc. ). Install the bottom plate to the bottom of the machine
Summary of the content on the page No. 7
Before Using Before Using How to change the direction of the drain hose 1.Loosen the fastening screw of the 3.Extend the drain hose from the installation back cover to take off the back cover. hole at the right side of the base frame. Fix Be careful not to do it by force to the drain hose onto the base frame with the prevent breaking the claw of the back drain hose frame and fasten the screw. Then cover.(as indicated in Figure 1) set the drain hose hook on the drain hose and hang the
Summary of the content on the page No. 8
Before Using Before Using Install the water inlet hose Confirm the water tap Water tap,suitable Water tap,not suitable Outlet end surface >10mm It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water tap 1.Use the new water inlet hose provided with the machine to connect to the water faucet.Old hose sets should not be reused.
Summary of the content on the page No. 9
Before Using Before Using Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of the water inlet hose cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swaying it gently to Water absorption cushion confirm if it's suitable. Jointer of the water inle
Summary of the content on the page No. 10
Preparation before washing Using process Using process Preparation before washing 1.Connect the water inlet hose and open the water tap . 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Pay attention to followings before washing the laundries Confirm if Clear the pocket. Fasten the The quantity of When the pulsator there's speci
Summary of the content on the page No. 11
Put in the laundries Using process Using process The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 5.5kg. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and
Summary of the content on the page No. 12
Use the operation buttons Using process Using process Using process Using process a. a. Description of the function of the buttons "PROCEDURE"button With it you can select one or several processes of soak, wash, rinse and spin. STANDARD SOAK JEANS WASH GENTLE RINSE QUICK WASH SPIN WATER LEVEL PROGRAM SELECTION PROCEDURE SELECTION SELECTION " WATER LEVEL"button You can select from the following four programs. The user selects a suitable water level depending on the load. Standard Normal wash
Summary of the content on the page No. 13
RESERVE HOURS LATER "START/PAUSE"button SURPLUS(MIN) After the power is switched on, press it to To indicate -- during sensing. start the machine To indicate remaining min. During During working, push it to pause working. program running. During pause, push this button to restart and continue operation. To indicate remaining reserved time (hrs) during reservation period. To indicate fault symbols for abnormal "POWER ON/OFF"button conditions (see page 16) Page 16 Press "Power On/O
Summary of the content on the page No. 14
RESERVE HOURS LATER Using process Using process b. Operating procedure and explanations for the buttons STANDARD SURPLUS MIN SOAK JEANS WASH GENTLE RINSE QUICK WASH SPIN POWER WATER START ON/OFF LEVEL PROGRAM SELECTION PROCEDURE SELECTION RESERVATION PAUSE SELECTION CALEFACTION 1 Press the "POWER ON/OFF" button to switch on the power supply POWER ON/OFF After switching on, the washing machine heating function will be automatically set inactive. In order to select heating function, the"RESERV
Summary of the content on the page No. 15
Using process Using process 3 Press the button of "PROCEDURE SELECTION" PROCEDURE SELECTION to select suitable processes. After the power is switched on, the washing machine will automatically set a normal program comprising of processes of "Wash, Rinse and Spin" . If other program is desired, press the button of "Process" to select one or several process of soak, wash, rinse and spin. Refer to the paragraph "Processes selecting". Page 10 Attention Even there's no water in the tub, the spinni
Summary of the content on the page No. 16
Using process Using process 4 Press the "WATER LEVEL" button to select suitable water level WATER LEVEL SELECTION After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10. Page 10 RESERVATION CALEFACTION 5 Push the " RESERVATION/CALEFACTION" button to select suitable reserve program After switching on, the washing machine reserved wash program will be automatically set inactive. If yo
Summary of the content on the page No. 17
Disposal after washing Using process Using process After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See to Figure 1) Figure 1 2. Clean th
Summary of the content on the page No. 18
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason How to settle Buzzing upon reservation starts, Nixie tube indicates "E0" The top lid is not closed Close the
Summary of the content on the page No. 19
Packing list Name Quantity Storage position User's manual One Inside the document bag Components of the water inlet hose Inside the accessory bag One Lint filter One Inside the document bag Bottom plate Between the upper cushion of One the washing machine package and the upper seal of the package carton Tapping screws Inside the document bag Five One Automatic washing machine Specification Water level/Water quantity (about) 0.03MPa-0.78MPa Water inlet pressure Rated washing / 5.5 (weight of s
Summary of the content on the page No. 20
