Summary of the content on the page No. 1
600B687/11
OWNER GUIDE
Model 339
Heartbeat Oxysafe 2
LIVE FUEL EFFECT GAS FIRE
(GC No. 32-032-29)
We trust that this guide gives
sufficient details to enable this
appliance to be operated and
maintained satisfactorily. However, if
further information is required, our
Baxi Fires Division Technical
Helpline will be pleased to help.
Telephone 08706 061 065 (National
call rates apply in the United
Kingdom).
In the Republic of Ireland
Telephone 0044 8706 061 065.
This guide is intended to help you ca
Summary of the content on the page No. 2
OWNER GUIDE THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20). THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE). © Baxi Heating U.K. Limited 2007. All rights reserved. No part of this publication may be reproduced in any material form (including photocopying), stored in any medium by electronic means (including in any retrieval system or database) or transmitted, in any form or by any means, whether electronic, mechanical, recording or
Summary of the content on the page No. 3
OWNER GUIDE Safety First. Baxi Fires Division fires are CE Approved and designed to meet the appropriate British Standards and Safety Marks. Quality and Excellence. All Baxi Fires Division fires are manufactured to the highest standards of quality and excellence and are manufactured under a BS EN ISO 9001 quality system accepted by the British Standards Institute. The Highest Standards Baxi Fires Division is a member of the Society of British Gas Industries which works to ensure high standards o
Summary of the content on the page No. 4
OWNER GUIDE LIST OF CONTENTS Section Page SAFETY 4 APPLIANCE DIMENSIONS 6 GAS CONSUMPTION 6 OPERATING YOUR FIRE 7 CLEANING YOUR FIRE 9 MAINTENANCE 10 USEFUL TELEPHONE NUMBERS 11 This gas fire is designed to meet the most stringent quality, performance and safety requirements to provide you with many years’ trouble-free service. This guide aims to improve your understanding and appreciation of your gas fire by providing simple and informative instructions to ensure that you benefit from the excel
Summary of the content on the page No. 5
OWNER GUIDE Do wait three minutes before attempting to relight if the fire is switched off or the flames are extinguished for any reason. (Your fire is fitted with a safety device that will automatically shut off the gas supply to the fire if, for any reason, the flames go out). Do get advice about the suitability of any wall covering near your fire. Soft wall coverings (e.g. embossed vinyl, etc.) which have a raised pattern are easily affected by heat. They may, therefore, scorch or become d
Summary of the content on the page No. 6
OWNER GUIDE Don’t attempt to clean or service the fire until it has been switched off and allowed to cool completely. Don’t allow any combustible material (e.g. Wallpaper, plastic tiling, wood panelling etc) on the surface wall below below the shelf. APPLIANCE DIMENSIONS See graph 1 Figure 1 Dimensions and clearances GAS CONSUMPTION Has a maximum natural gas input of 5.1kW (Gross) Has a maximum natural gas output of 3.6kW Has a minimum natural gas input of 1.5kW (Gross) Has a minimum natural ga
Summary of the content on the page No. 7
OWNER GUIDE OPERATING YOUR FIRE PLEASE NOTE When operating your fire for the first time, some vapours may be given off which may cause a slight odour and could possibly set off any smoke alarms in the immediate vicinity. These vapours are quite normal with new appliances. They are totally harmless and will disappear after a few hours use. The Oxysafe flame sensing and flue blockage safety system. For your safety, this appliance is fitted with a flue blockage safety device that will shut down the
Summary of the content on the page No. 8
OWNER GUIDE changing the burner setting. ·The burner settings are; Control Knob Burner appearance Position 1 / IGN Centre section on low. Outer sections off. 2 Centre section fully on. Outer sections off. 3 Centre section fully on. Outer sections on low. 4 All sections fully on. ·We recommend that the fire is set at position 4 for the first 10 minutes after lighting to warm up the chimney and so obtain full efficiency quickly. ·If operating the appliance for long periods it is beneficial occasi
Summary of the content on the page No. 9
OWNER GUIDE CLEANING YOUR FIRE To maintain the high performance and quality finish of your Baxi Fires Division fire, please follow these guidelines: ·Before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool. The fire will retain heat for some time before cleaning can begin. ·If any pieces of debris are found in the fire box, have the chimney inspected before further use. Metal parts. ·Clean the metal parts with a slightly damp cloth and then dr
Summary of the content on the page No. 10
OWNER GUIDE Ceramic fuel effect. ·This product uses a ceramic fuel effect containing Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres. Excessive exposure to this material may cause temporary irritation to eyes, skin and respiratory tract. Consequently, it makes sense to take care when handling this article to ensure that the release of dust is kept to a minimum. ·Although light coatings of soot are usually burnt off during normal use, the ceramic fuel effect may ben
Summary of the content on the page No. 11
OWNER GUIDE Servicing. ! In the United Kingdom servicing can be carried out either by a Baxi Fires Division service engineer or a CORGI registered installer. ! If you require your fire to be serviced, please contact Baxi Fires Division Service on 08706 090 081 and quote the following details; Model name and number. Appliance serial number (To be found on a label near the bottom left side of the fascia). ! If you wish to replace the ceramic fuel effect, spare parts are available nationwide vi
