Deglon Rotary Cutter user manual

User manual for the device Deglon Rotary Cutter

Device: Deglon Rotary Cutter
Category: Brush Cutter
Manufacturer: Deglon
Size: 4.5 MB
Added : 3/27/2014
Number of pages: 30
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Deglon Rotary Cutter. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Deglon Rotary Cutter.

For your convenience

If looking through the Deglon Rotary Cutter user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Deglon Rotary Cutter on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Deglon Rotary Cutter to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Deglon Rotary Cutter User manual - Online PDF
Advertisement
« Page 1 of 30 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Deglon Rotary Cutter but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Deglon Rotary Cutter. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Parts
General Assembly - 1520 Model
Wing Driveline (pg. 57)
Center Shield
Main Driveline Right Wing Assembly (pg. 43)
Assembly
(pg. 55-56)
Wing Lift Cylinder, 3” x 16” (pg. 53)
(pg. 46)
Rephasing Cylinder, 3” x 8” (pg. 54)
Center Section
Hitch Assembly
Assembly
(pg. 45)
(pg. 41-42)
Right Wheel Strut
(Walking Axle
also available)
(pg. 48)
Tie Bar Assembly (pg. 41)
Center Driveline (pg. 58)
Wing Driveline (pg. 57)
Pan, Blades, &
Hardware (pg. 50)
Left Wing
Assembly
(pg. 43)
Rephasing

Summary of the content on the page No. 2

Center Frame Assembly 500800 - Complete Tie Bar, (no pins) (2) Use non-removable loctite when replacing splitter box 500805 - Tie Bar Clevis, Front (2) bolt hardware. 118973 - Bolt, 1/2” x 2-3/4” UNC (4) 500819 - Pin, 1-1/4” x 2-1/16” (4) 118729 - Lock Nut, 1/2” UNC GRC Unitorque (4) 118110 - Bolt, 5/16” x 1” UNC (4) 118530 - Lock Washer, 5/16” (4) 118731 - Flat Washer, 5/16” SAE (4) 160004 - Cone Shield, 9” Diameter (1) 118456 - Lock Nut, 1” UNC (2) 131020 - Flat Washer, 1” SAE (2) 118843

Summary of the content on the page No. 3

Center Frame Assembly 118901 - Lynch Pin, 3/6” x 1-1/2” (1) Counter Clockwise 170063 - Gearbox 1000 RPM OR 118378 - Bolt, 5/8”x 1-3/4” (2) 170017 - Gearbox 540 RPM 118983 - Bolt, 1/4” x 3/4” (4) 118447 - Lock Nut, 5/8” 118555 - Flat Washer, 1/4” (4) GRC-Unitorque (2) Clockwise 133100 - Manual Holder (1) 170061 - Gearbox 1000 RPM 118537 - Flat Washer, 118555 - Flat Washer, 1/4” (4) OR 5/8” SAE (2) 170019 - Gearbox 540 RPM 118483 - Lock Nut, 1/4” 501005 - Urethane Bumper (2) - U

Summary of the content on the page No. 4

Right / Left Wing Assembly (Right Wing Assembly Shown) 500869 - Wing Skid Shoe - LH (1) 118417 - Lock Nut, 3/8” 500608 - 5 Bolt Chain Safety Bar (3) 118729 - Lock Nut, 1/2” GRC Unitorque (6) UNC GR5 (25) 500912 - Cable, 1/4” x 71” (1) 118512 - Flat Washer, 1/2” (6) 118511 - Flat Washer, (Optional) 3/8” (25) 118642 - Carriage Bolt, 1/2” x 1-1/4” (6) 500600 - 3 Bolt Chain 118964 - Carriage Bolt, 500868 - Wing Skid Shoe - RH (1) Safety Bar (2) 3/8” x 3” (25) Wing Driveline 160002 - (1000 /

Summary of the content on the page No. 5

Counterweight Assembly (1020 Model Only) 118966 - Roll Pin, 5/16” x 1-3/4” (2) 500837 - Hinge Pin, 1-3/16” x 97-3/4” (1) 500265 - Counterweight Frame (1) 500870 - Counterweight Skid (1) 118984 - Bolt, 1-1/4” x 3” GR5 (2) 500257 - Bolt Plate (2) 118445 - Lock Nut, 1-1/4” GR5 (2) 117436 - Bolt, 1” x 8-1/2” GR5 (6) 118417 - Lock Nut, 3/8” UNC GR5 (4) 306356 - Chain, 5/16” - 11 Links (4) 118511 - Flat Washer, 3/8” (8) 118136 - Bolt, 3/8” x 1-1/2” (4) 500869 - Wing Skid Shoe - LH (1) 500868 -

Summary of the content on the page No. 6

Hitch Assembly 143111 - Hose Holder (1) 118024 - Bolt, 5/8” x 1-1/2” UNC (1) 118514 - Washer, 5/8” (1) 500300 - Hitch Frame (1) 118447 - Lock Nut, 5/8” UNC 118422 - Lock Nut, 3/4” UNC (3) Unitorque (1) 118516 - Flat Washer, 3/4” (6) 500328 - Jack Holder (1) 118043 - Bolt, 3/4” x 2” UNC (3) 118336 - Grease Fitting, 1/4” (1) 118962 - Lock Nut, 1-1/4” UNF GR8 (1) 117111 Bushing (2) 131206 - Flat Washer, 1-1/4” SAE (1) 500312 - Swivel Hitch (1) 132051 - Sidewind Jack (1) 118929 -

Summary of the content on the page No. 7

Center Shield and Hydraulic Hose Clamps 500715 - Center Shield Assembly (1) - includes - 133093 - Capscrew, M8 x 1.25 x 30mm (2) 133092 - Plastic Handle (1) 133094 - Nut, M8 x 1.25mm (2) Hose Clamp Layout Assembly (See Detail Below) Single Acting Hose Clamp Layout Double Acting Hose Clamp Layout 118945 - Bolt, 5/16 x 2-3/4 UNC (1) 118144 - Bolt, 5/16 118144 - Bolt, 5/16 x 1-1/2 UNC (2) x 1-1/2 UNC (1) 780279 - Top Plate (2) 780279 - Top Plate (2) 780278 - Hose Clamp Block (2) 7802

Summary of the content on the page No. 8

Rockshaft Assembly 500840 - Transport Lock Rockshaft Suspension Detail 243500 - Lock Pin, 5/16” x 2-1/2” Preloading of rubber spring required on all strut assemblies. Exposed thread length should be 131020 - Flat Washer 1” SAE (2) approximately 1/2” 118966 - Roll Pin, 5/16” x 1-3/4” (2) when using correct 500412 - Pin, 1” x 4-11/16” hardware. 500400 - Rockshaft 117111 - Bushing, 1-1/2” OD x 1” 500330 - Bolt, 1-1/4” x 7-1/2” UNF 118962 - Lock Nut, (c/w Grease Fitting) 1-

Summary of the content on the page No. 9

Wheel Strut Assemblies Upper Strut Wing Suspension Detail Common Preloading of rubber spring required 500450 - Upper Strut, on all strut assemblies. Exposed - Right Side (Not Shown) thread length should be approximately 3/8” 500455 - Upper Strut, when using correct - Left Side (Shown) hardware. 500330 - Bolt, 1-1/4” x 7-1/2” UNF (c/w Grease Fitting) Suspension Components 131206 - Flat Washer,1-1/4” SAE 118962 - Lock Nut,1-1/4” UNF GR8 117461 - Bolt, 5/8” x 6” UNC GR8

Summary of the content on the page No. 10

Hub & Spindle 131390 - Hub & Spindle Assembly 131382 - Spindle, S517-1 (1) This model comes with a three 131393 - Seal, Retainer - CTD 2762C (1) piece seal and different hub. All other components common with 131392 - Seal, V - CTD 2764 (1) 131380 Hub/Spindle Assembly. 131391 - Seal, C/Face - CTD 2763C (1) 131024 - Cone, Bearing - LM48548 (1) 131025 - Cup, Bearing - LM48510 (1) 131389 - Hub, CTD 517-7 (c/w studs & cups) (1) 118336 - Grease Fitting (1) 131380 - Hub & Spindle Assembly 131386 -

Summary of the content on the page No. 11

Note: See Gearbox Details pg. 60-64 for correct Cutter Pan Mounting Hardware Blades, Pan, & Hardware including nuts, coned washers, & cotter pins. Standard Blade Carrier Assembly 117417 - Blade Lock Nut (Tapered) (1) 500525 - Blade Carrier (1) Coned Washer Castle Nut Cotter Pin 117415 - Blade Bolt - Square Clockwise Blades Shoulder (Tapered) (1) Optional Skid Pan Assembly 501015 - 4” High Suction Blade (1) 118949 - Blade Bolt Lock Nut (1) 501029 - 4” High Suction- Twist

Summary of the content on the page No. 12

Hydraulic Schematics Height Control Cylinders - 1520 Model (Note: Cylinder details are shown on a separate page) 141581 - Coupler, Tip (2) 141515 - Nipple, (2) 126666 - Hose, 3/8 x 192” 126667 - Hose, 3/8 x 246” 141504 - Elbow, 90° 141515 - Nipple 126503 - Hose, 3/8 x 82” 141616 - Elbow, 45° (4) 122836 - Wing 122830 - Wing Height Cylinder Height Cylinder (3-1/4” x 8”x 1-1/4”) (3” x 8”x 1-1/4”) 126626 - Hose, 3/8 x 168” 122850 - Center Height Cylinder, (3-1/2” x 8” x 1-1/4”) Wing Lift Cy

Summary of the content on the page No. 13

Hydraulic Schematics Height Control Cylinders - 1020 Model Hydraulic Fitting Guide (Note: Cylinder details are shown on a separate page) 141581 - Coupler, Tip - 3/4 ORB F 141581 - Coupler, Tip (2) 141515 - Nipple, (2) 141506 - Orifi ce, 126666 - Hose, 3/8 x 192” Plate 0.0700” ID 126667 - Hose, 3/8 x 246” 141515 - Nipple, - 3/4 JIC M x 3/4 ORB M 141513 - Elbow, 90° - 3/4 JIC M x M 141504 - Elbow, 90° 141501 - Tee, 141515 - Nipple - 3/4 JIC M x M x M 126503 - Hose, 3/8 x 82” 122850 -

Summary of the content on the page No. 14

Cylinders 122875 - Wing Lift Cylinder (with Internal Compression Spring) - 3” x 16” x 1-1/2” 122879 - Rod/Clevis - 1-1/2” x 16” 118796 - Bolt, Shoulder - 1/2” UNC 122556 - Cap, Open - 3” x 1-1/2” 118924 -Flat Washer - .591” ID x .905” OD 122558 - Lock Ring, 3” 118930 - Pin, - 1” x 2-13/16” 122877 - Barrel, 3” x 16” 143500 - Spring, Compression 122881 - Piston, 3” 118441 - Lock Nut, 7/8 UNF Unitorque 122523 - Seal Kit 118930 - Pin, - 1” x 2-13/16” 118924 - Flat Washer - .591” ID x .905” OD 1

Summary of the content on the page No. 15

Cylinders 122836 - Wing Height Control Cylinder (with Rephasing Grooves) - 3-1/4” x 8” x 1-1/4” (1520 Model - Left Wing, 1020 Model - Right Wing) 118796 - Bolt, Shoulder - 1/2” UNC 118924 -Flat Washer - .591” ID x .905” OD 118930 - Pin, - 1” x 2-13/16” 122085 - Rod/Clevis - 1-1/4” x 10” 122840 - Cap, Open - 3-1/4” x 1-1/4” 122842 - Lock Ring, 3-1/4” 122838 - Barrel, 3-1/4” x 8” 122843 - Piston, 3-1/4” 118441 - Lock Nut, 7/8 UNF Unitorque 122849 - Seal Kit 118930 - Pin, - 1” x 2-13/16” 1189

Summary of the content on the page No. 16

Drivelines 160000 - 1000 PTO Driveline - Main Driveline with 80° CV Joint - B&P SFT S6 160078 - Sleeve 160069 - Shield 160073 - Screw (6) Optional 160070 - Ring 160102 - Yoke, S6 -1 3/4 20 spline (c/w Sleeve) 160071 - Shield 160050 - Yoke, S6 -1 3/8 160051 21 spline (c/w Sleeve) Cross Kit 160055 - CV Body, S6 160054 - Yoke, S6 160056 - Tube 160072 - Shield 160053 160073 160064 - Ring Grease Screw Fitting 160065 - Cone/Tube (4) 160073 - Screw (4) 160058 Pin, Roll 160086 -

Summary of the content on the page No. 17

Drivelines 160001 - 540 PTO Driveline - Main Driveline with 80° CV Joint - B&P SFT S8 160108 - Sleeve 160104 - Shield 160073 - Screw (6) 160105 - Ring 160106 - Shield 160087 - Yoke, S8 -1 3/8 160088 6 spline (c/w Sleeve) Cross Kit 160091 - CV Body, S8 160090 - Yoke, S8 160092 - Tube 160107 - Shield 160053 160073 160099 - Ring Grease Screw Fitting 160100 - Cone/Tube (4) 160073 - Screw (4) 160094 Pin, Roll 160116 - Shield Kit 160112 Outer Shaft (c/w Shielding) 160063 Grease 160113

Summary of the content on the page No. 18

Drivelines 160010 - 540/1000 PTO Driveline - Wing Driveline with Torque Limiter - B&P SFT S6 160061 Cross Kit 160151 - Torque Limiter - 950 NM (Detail - pg. 59) 160123 - Yoke, S6 160124 - Tube 160126 - Ring 160169 - Shield 160147 160073 - Screw (3) Outer Shaft 160156 - Cone/Tube (c/w Shielding) (Outer) 160171 - Shield Kit 160095 Pin, Roll 160063 Grease Fitting (2) 160148 Inner Shaft (c/w Shielding) 160157 - Cone/Tube (Inner) 160125 - Tube 160073 - Screw (3) 160059 - Pin, Roll 160169 - Sh

Summary of the content on the page No. 19

160003 - 1000 PTO Driveline - Center Drivelines Driveline with 950 NM Torque Limiter - B&P S5 160005 - 540 PTO Driveline - Center Driveline with 1450 NM Torque Limiter - B&P S5 160151 - Torque Limiter - 950 NM 1000 PTO Driveline (Detail - pg. 59) - OR - 160155 - Torque Limiter - 1450 NM 540 PTO Driveline (Detail - pg. 59) 160061 Cross Kit 160122 - Yoke, S5 160152 - Spline, Male 160153 - Pin, Roll 160122 - Yoke, S5 160154 - Yoke, S5 (c/w Bolt) 160120 - Bolt, Pivot (c/w Tapered Nut)

Summary of the content on the page No. 20

160151 - Torque Limiter 950 NM - Wing 540/1000 PTO Drivelines 950 NM - Center 1000 PTO 160155 - Torque Limiter 1450 NM - Center 540 PTO Note: All parts are common with the exception of the torque limiter spring. (See Below) 160134 - Bolt & Nut (8) 160135 - Plate, Flange Yoke (1) 160136 - Bushing (1) 160132 - Lining, Torque Limiter (1) 160138 - Lining, Plate (1) 160132 - Lining, Torque Limiter (1) 160121 Bolt, Pivot (c/w Nut & Washer) (1) 160141 or Socket Head 160170 - Bolt, Pivot (c/w


Alternative user manuals
# User manual Category Download
1 Deglon 1020 User manual Brush Cutter 0
2 Alamo SR14 User manual Brush Cutter 1
3 Alamo SR20 User manual Brush Cutter 2
4 Alamo GR60 User manual Brush Cutter 2
5 Alamo GR72 User manual Brush Cutter 1
6 Alamo TW84 User manual Brush Cutter 2
7 Ariens 946150 ST622 CARB User manual Brush Cutter 20
8 Bahco Cut & Hold Secateur PX-Rose User manual Brush Cutter 0
9 Bench 32PFL7582D User manual Brush Cutter 1
10 Bench PRC 9.6 User manual Brush Cutter 2
11 Billy Goat BC2402IC, BC2402H, BC2402HE, BC2402ICE User manual Brush Cutter 2
12 Billy Goat BC2401IC User manual Brush Cutter 1
13 Billy Goat GZ401H User manual Brush Cutter 0
14 Billy Goat BC2402HE User manual Brush Cutter 1
15 Billy Goat BC2403 Series User manual Brush Cutter 2