Woods Equipment S20CD user manual

User manual for the device Woods Equipment S20CD

Device: Woods Equipment S20CD
Category: Chipper
Manufacturer: Woods Equipment
Size: 3.81 MB
Added : 10/22/2013
Number of pages: 68
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Woods Equipment S20CD. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Woods Equipment S20CD.

For your convenience

If looking through the Woods Equipment S20CD user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Woods Equipment S20CD on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Woods Equipment S20CD to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Woods Equipment S20CD User manual - Online PDF
Advertisement
« Page 1 of 68 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Woods Equipment S20CD but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Woods Equipment S20CD. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

FLAIL
SHREDDER
Center Drive
S15CD
S20CD
S22CD
S25CD
S27CD
MAN0506
(Rev. 11/8/2011)
OPERATOR'S MANUAL

Summary of the content on the page No. 2

TO THE DEALER: ® Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Operator’s Manual are completed before releasing equipment to the owner. The dealer must complete the online Product Registration form at the Woods Dealer Website which certifies that all Dealer Check List items have been completed. Please contact your dealer to comp

Summary of the content on the page No. 3

TABLE OF CONTENTS INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 BALANCE STATEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of the content on the page No. 4

SPECIFICATIONS Maximum Outside Body Width: 15′ . . . . . . . . . . . . . . . . . . 189 in. (4.9 m) 20′ . . . . . . . . . . . . . . . . . . 253 in. (6.4 m) 22′ . . . . . . . . . . . . . . . . . . 277 in. (7.0 m) 25′ . . . . . . . . . . . . . . . . . . 309 in. (7.8 m) 27′ . . . . . . . . . . . . . . . . . . 334 in. (8.4 m) Cutting Height: . . . . . . . . . . . . . . . . . . . . 3 - 18 in. (7.62 cm to 45.7 cm) Width of Cut: 15′ . . . . . . . . . . . . . . . . . . 183 in. (4.6 m) 20′ . . . . . . . .

Summary of the content on the page No. 5

IMPORTANT! BALANCE STATEMENT Both of the Woods Center Drive Shredder flail tubes wear unevenly. This can reduce their chopping are balanced as rotor assemblies to meet or exceed effect and also increase vibration levels. factory standards before installation. After installation, ● Hitting large rocks or other foreign objects can the shredders are statistically inspected to check bal- damage knives and other rotor parts, causing ance. These factory efforts allow the shredder to oper- excessive vi

Summary of the content on the page No. 6

SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! PREPARATION Safety is a primary concern in the design and Use a suitable lifting device of sufficient capac- manufacture of our products. Unfortunately, our ity. Use adequate personnel to handle heavy com- efforts to provide safe equipment can be wiped ponents. out by an operator’s single careless act. Check that all hardware is properly installed. In addition to the design and configuration of Always tighten to torque chart specif

Summary of the content on the page No. 7

SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Connect PTO driveline directly to power unit attachments are in transport position. Without this PTO shaft. Never use adapter sleeves or adapter weight, front tractor wheels could raise up result- ing in loss of steering. The weight may be attained shafts. Adapters can cause driveline failures due to incorrect spline or incorrect operating length and with front wheel weights, ballast in tires or front tractor weights. Weigh the trac

Summary of the content on the page No. 8

SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! (Safety Rules continued from previous page) Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- Look down and to the rear and make sure area ponents. is clear before operating in reverse. Always wear relatively tight and belted clothing Do not operate or transport on steep slopes. to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective Do not sto

Summary of the content on the page No. 9

SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Make sure all safety decals are installed. Leak down or failure of mechanical or hydraulic Replace if damaged. (See Safety Decals section for system can cause equipment to drop. location.) Make sure shields and guards are properly STORAGE installed and in good condition. Replace if dam- Block equipment securely for storage. aged. Keep children and bystanders away from stor- Do not disconnect hydraulic lines until engine is age

Summary of the content on the page No. 10

SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! 3 - SERIAL NUMBER PLATE 1 - YELLOW REFLECTOR PN 20034004 2 - RED REFLECTOR PN 57123 MODEL NO. SERIAL NO. 4 - RED-ORANGE FLUORESCENT MATERIAL PN 20034034 Woods Equipment Company Oregon, Illinois, U.S.A. 5 - PN 50030977 CAUTION PRECAUCION 1. Read Operator's Manual before starting. 1. Lea el Manual del Operario antes de empezar. 2. Stop tractor engine, place all controls in 2. Pare

Summary of the content on the page No. 11

SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! DANGER DANGER PELIGRO PELIGRO ROTATING FLAIL HAZARD ROTATING DRIVELINE HAZARD To prevent serious injury or death from To prevent serious injury or death from rotating flails: rotating driveline: 1. Stop engine, remove ignition key, and wait 1. Keep all guards in place when operating. for moving parts to stop before servicing. 2. Operate only at 1000 RPM. 2. Keep hands and feet awa

Summary of the content on the page No. 12

SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! (Safety Decals continued from previous page) 12 - PN 50530728 11 - PN 50530707 WARNING 14 - PN 50530315 ADVERTENCIA 16 - PN 33347 15 - PN 18864 HIGH-PRESSURE FLUID HAZARD DANGER To prevent serious injury or death: 1. Relieve pressure on system before repairing, adjusting, or disconnecting. 2. Wear proper hand and eye protection when searching for leaks. Use wood or c

Summary of the content on the page No. 13

OPERATOR SIGN-OFF RECORD Woods Equipment Company follows the general safety Do not operate or allow anyone else to operate this standards specified by the American Society of Agri- equipment until this information has been reviewed. cultural and Biological Engineers (ASABE) and the Review this information annually, before the season Occupational Safety and Health Administration start-up. Make periodic reviews of the Safety and (OSHA) for agricultural equipment. Operation sections standard practi

Summary of the content on the page No. 14

OPERATION The Woods Flail Shredder is designed to pick up and shred crop and plant residue left in the field. Rotational CAUTION power to the flails is provided by the tractor PTO. Always comply with all state and local lighting Be familiar with the flail shredder before starting. and marking requirements. The owner is responsible for training operators in the Always wear relatively tight and belted clothing safe operation of the flail shredder. to avoid getting caught in moving parts. Wear s

Summary of the content on the page No. 15

1. Crossmember 2. Rubber belt shield 3. Skid assembly 4. Rubber belt shield 5. Body weldment 6. Flail tube assembly RH 7. Flail tube assembly LH 8. Woods model decal 9. Gearbox 10. Bearing assembly Figure 1. Flail Shredder Principal Components ___ Inspect all hydraulic lines, hoses, couplers, and PRE-OPERATION CHECK LIST fittings. Tighten, repair, or replace any leaking or (OWNER'S RESPONSIBILITY) damaged components. ___ Install and secure all guards, doors, and covers. NOTICE ■ This Pre-Opera

Summary of the content on the page No. 16

6. Drawbar (Pull-Type Models Only) Table 1: Tractor Horsepower (6-8) vs. Unit Width The tractor drawbar must be set to provide 16" (406 Width Minimum Horsepower mm) on 1-3/8 - 21 or 20" (508 mm) 1-3/4 - 20 between the end of the PTO shaft and the center of the drawbar 15′ 90 pin for all 1000 rpm PTO. See Figure 4. This dimension 20′ 120 will provide the required clearance for the CV (Con- stant Velocity) joint on the front of the driveline. 22′ 132 NOTICE 25′ 150 ■ Do not use PTO shaft adapters

Summary of the content on the page No. 17

ATTACHING SHREDDER TO TRACTOR 1. Place unit on a level, dry area free of debris and other foreign object. Keep bystanders away from equipment. 1. Clear the area of all bystanders. Keep bystanders away from equipment. 2. Attach the 3-point hitch to the unit but not the PTO driveline. Connect PTO driveline directly to power unit PTO shaft. Never use adapter sleeves or adapter 3. Raise the unit until the tractor PTO and gearbox shafts. Adapters can cause driveline failures due

Summary of the content on the page No. 18

Without Quick Hitch Attachment: 1. Back tractor lower 3-point arms between lower mast plates and align with lower 3-point hole. 2. Place 1-3/4 OD spacer through 3-point arm pivot (both sides). 3. Push tractor’s 3-point arm to the inside and slide a 1-7/16 OD spacer between to take up the empty space. Secure with lower 3-point hitch pin assembly, 1-3/4 OD spacer, and 7/16 x 2 klik pin. 4. Repeat steps 5 and 6 for other side. Figure 8. Drawbar & Safety Chain 5. Lower the tractor’s top link arm an

Summary of the content on the page No. 19

Keep hands, feet, hair, and clothing away from Raise Stands equipment while engine is running. Stay clear of all 1. Use hitch ratchets or 3-point hitch to raise the front moving parts. of the machine. Before dismounting power unit or performing 2. Unpin front frame stands. Raise and pin in their any service or maintenance, follow these steps: upper position. See Figure 10. disengage power to equipment, lower the 3-point hitch and all raised components to the ground, REMOVING SHREDDER FROM TRAC

Summary of the content on the page No. 20

the flails under all operating conditions. (See Balance 4. 3-Point models only: Be sure the floating mast is Statement, page 5.) free to slide in its mounting frame to allow the machine to follow ground contours. Refer to Figure NOTE: To avoid unnecessary wear on knives and 13. related parts, never set the unit lower than the recom- mended setting. (See Balance Statement, page 5.) Floating Top Mast 7109 7111 Figure 11. 3-Point Hitch Models Figure 13. Free-Float Position SET OPERATING HEIGHT FL


Alternative user manuals
# User manual Category Download
1 Woods Equipment S30CD User manual Chipper 0
2 Woods Equipment 8100 User manual Chipper 0
3 Woods Equipment 8000 User manual Chipper 1
4 Woods Equipment S27CD User manual Chipper 0
5 Woods Equipment S22CD User manual Chipper 0
6 Woods Equipment S15CD User manual Chipper 0
7 Woods Equipment S25CD User manual Chipper 0
8 Woods Equipment TCH4500 User manual Chipper 0
9 Philips SVGA COLOUR MONITOR 7CM5209 User manual Chipper 0
10 Agri-Fab Chip-N-Vac 2468 User manual Chipper 1
11 Philips SVGA COLOUR MONITOR 7CM5279 User manual Chipper 2
12 Agri-Fab Chip-N-Vac 552493 User manual Chipper 0
13 Agri-Fab Chip-N-Vac 502493 User manual Chipper 1
14 Agri-Fab Chip-N-Vac 45-0253 User manual Chipper 0
15 Ashly CLX-52 User manual Chipper 16