Summary of the content on the page No. 1
®
9” QUICK RELEASE
WOODWORKING VISE
94386
OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For techn
Summary of the content on the page No. 2
SPECIFICATIONS Jaw Width 9 Inches Throat Depth 3 Inches Maximum Jaw Opening 10-5/16 Inches Jaw Hardness 25-30 HRC Rear Mounting Hole Dimensions .435” Diameter x 2 and .420”W x .714”H x 2 Overeall Dimension 6.0”L X 9.0”W X 18.0”H Net Weight 24 Lbs. SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, operating and maintenance procedures, parts list and diagram. Keep your in- voice with this manual. Write the invoice number on the inside of the front cover. Keep th
Summary of the content on the page No. 3
8. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. 9. MAINTAIN PRODUCT WITH CARE. Keep this product clean and dry, and moving parts lightly lubricated for better performance. Keep the Handle dry, clean and free from oil, grease, and solvents. 10. USE THE RIGHT PRODUCT FOR THE RIGHT
Summary of the content on the page No. 4
5. From the underside of the workbench, put the appropriate size washers, lock washers and nuts on the bolts (not provided). Tighten all the nuts, securing the Vise Plate (1) to the workbench. Be sure the Vise is securely attached to the workbench before working with the Vise. Mounting Holes Thumb on Quick Release Lever (4) Vise Plate (1) Figure 1 OPERATING INSTRUCTIONS Note: By pushing down on the Quick Release Lever (4), you can release the Jaws so the Jaws can be easily and quickly slid op
Summary of the content on the page No. 5
PARTS LIST PART # DESCRIPTION QTY 1 1 Vise Plate 2 2 Jaws 3 1 Handle 1 4 Quick Release Lever 5 Lead Screw 1 Part (4) Note: No replacement parts are available for this product. PARTS DESCRIPTION Lead Screw (5) Part (1) Part 3 Part 2 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND T
Summary of the content on the page No. 6
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of maintenance. We shall in no e
