Harbor Freight Tools 40195 user manual

Summary of the content on the page No. 1

RechaRgeable -3 headed
Sha VeR
40195
chaRging and OpeRating inStR uctiOnS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
tO pReVent SeRiOuS inju Ry, Read and unde RStand
all waRningS and inStR uctiOnS befORe uSe.
© ®
Copyright 2002 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may b

Summary of the content on the page No. 2

SpecificatiOnS Body Construction Molded PVC, Stamped & Ground Stainless Steel Head 3 Removable Flex Foils Charging Power Source 120 V~ / 60 Hz, 2,450 RPM Internal NiCd ‘AA’ type Battery iMpORtant! Remove before disposal, see page 5. Power Cord 3’3” Length. UL Listed, 2-Prong Plug Charging Time 8 - 16 hrs. Trimmer Width 7/8” Number of Cutters 3 Cutters with 6 Blades per Cutter SaVe thiS Manual You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and

Summary of the content on the page No. 3

10. always unplug this appliance from the electrical outlet immediately after us - ing. 11. unplug this appliance before cleaning. 12. t his appliance should never be left unattended when plugged in. Close supervi- sion is necessary when this appliance is used by, on, or near children or invalids. 13. use this appliance only for its intended use, as described in this manual. 14. never operate if damage is done to cord or plug, or if the shaver has been dropped or damaged. 15. do not operate wi

Summary of the content on the page No. 4

chaRging inStR uctiOnS note: All numbers referenced below refer to the parts listed on page 6 of this manual. 1. Rechargeable Shaver (1) is charged by attaching Power Cord (4) to Shaver and electrical outlet. Push the Switch (5) down. Charging Indicator Light (3) will tell you that charging is taking place. This will take 8-16 hours to charge. When fully charged, your shaver can be used about 7 days. When charge is complete, disconnect power cord. 4 3 5 2. Charging more than 16 hrs. can d

Summary of the content on the page No. 5

diSpOSal inStR uctiOnS important! note: this item contains a nicd battery that must be recycled or disposed of properly. do not dispose of this item without first removing the nicd battery for proper disposal/recycling. Removing the battery will destroy the shaver and should only be done prior to disposal. 1. Remove the two Screws on the back of the shaver towards the bottom. 2. Flip up the Trimmer (2) and remove the two screws from the holes that are now exposed. 3. Swing the back housing

Summary of the content on the page No. 6

paR tS liSt and diagRaM part description q’ty 1 Shaver 1 2 Trimmer 1 3 Indicator Light 1 4 Power Cord 1 5 Switch 1 6 Travel/Storage Pouch 1 7 Protective Cap 1 8 Shaver Brush 1 9 Cutting Heads 3 10 Removable Plastic Foil Cover 1 6 8 4 2 7 9 10 1 5 3 Record product’s Serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. fo