Harbor Freight Tools 91091 user manual

Summary of the content on the page No. 1

91090 91091
WHITE PAINTED VARNISHED
ADIRONDACK ADIRONDACK
CHAIR CHAIR
ASSEMBLY AND OPERATING INSTRUCTIONS
91091 Pictured
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
© ®
Copyright 2004 by Harbor Freight Tools . All rights reserved.
No portion of this manual or any artwork contained herein may be
reproduced in any shape or form without the express written consent
of Harbor Freight Tools.
For technical questions and replacement parts, please call

Summary of the content on the page No. 2

Specifications SKU 91090 SKU 91091 Comfortable White-Painted Fir Comfortable Varnished Fir wood Adirondack chair. wood Adirondack chair. Dimensions: Overall: 33”L x 36”W x 37”H Back Seat Height: 10” Seat Area:18-1/2”D x 22”W Back Slat Length: 32” Arm Rest:31-1/4”L x 5-1/8”W Front Legs: 21”L x 3”W x 7/8” Front Seat Height: 15” Side Legs: 35-1/2”L Weight: 20 lbs. Weight Capacity: 250 lbs. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, oper

Summary of the content on the page No. 3

8. Use eye and ear protection. Always wear ANSI approved impact safety goggles during assembly. Wear a full face shield if you are producing wood chips. Wear an ANSI approved dust mask or respirator when working around wood, and chemical dusts and mists. 9. Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When cutting these materials extra care should be taken to avoid inhalation and minimize skin contact. 10. Check for damaged parts.

Summary of the content on the page No. 4

Assembly Carefully unpack the parts and check for damaged or missing parts. 1. Attach Left Front Leg (C1) and Right Front Leg (C2) to Seat (B) using 3 Bolts (H) per side. Use the included washers and nuts to tighten. 2. Attach both Back Supports (D) to the inner sides of the Seat (B) using 2 Bolts (H) per side. Tighten using the included washers and nuts. 3. Attach the Left Arm (E1) and Right Arm (E2) to the Front Legs (C1, C2) using 2 Wood Screws (G) per side. Attach the Arms (E1, E2) to the Ba

Summary of the content on the page No. 5

Assembly Drawings SKU 91090-91091 Page 5

Summary of the content on the page No. 6

Parts List Back Seat Left Front Leg Right Front Leg Back Support Left Arm Right Arm Front Support Wood Screws 55mm Bolt 65mm Bolt with Washer and Nut with Washer and Nut NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE M