Summary of the content on the page No. 1
English
MODEL Variable speed CORDLESS DRIVER DRILL
MODÈLE PERCEUSE-VISSEUSE À BATTERIE
FDS 9DVA • FDS 12DVA
MODELO TALADRO ATORNILLADOR A BATERÍA
FDS9DVA
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
WARNING
Improper and unsafe use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read
and understand this manual before operating the power tool. Please keep this
manual available for others before they use the powe
Summary of the content on the page No. 2
English CONTENTS English Page Page ASSEMBLY AND OPERATION ............................. 12 IMPORTANT INFORMATION ............................. 3 APPLICATIONS .................................................. 12 MEANINGS OF SIGNAL WORDS ....................... 3 REMOVAL AND INSTALLATION METHOD OF BATTERY .................................................. 12 SAFETY .................................................................... 4 CHARGING METHOD ........................................ 12 GE
Summary of the content on the page No. 3
English IMPORTANT INFORMATION Read and understand all of the operating instructions, safety precautions and warnings in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures. Basic safety precau
Summary of the content on the page No. 4
English SAFETY GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS 1. Work Area (1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. (2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools creat
Summary of the content on the page No. 5
English 4. Tool Use and Care (1) Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. (2) Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. (3) Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must
Summary of the content on the page No. 6
English SPECIFIC SAFETY RULES AND SYMBOLS 1. Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 2. Never touch moving parts. Never place your hands, fingers or other body parts near the tool’s moving parts. 3. Never operate without all guards in place. Never operate this tool without all guards or safety features in place and in
Summary of the content on the page No. 7
English IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER 1. This manual contains important safety and operating instructions for battery charger Model UC9SD and UC12SD. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. To reduce risk of injury, charge HITACHI rechargeable battery type FEB9S for UC9SD and FEB12S for UC12SD. Other type of batteries may burst causing personal injury and damage. 4. D
Summary of the content on the page No. 8
English 10. Do not operate battery charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 11. Do not disassemble battery charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 12. To reduce risk of electric shock, unplug charger from receptacle before attempting any maintenance or cleaning. Removing the battery will not reduce this risk.
Summary of the content on the page No. 9
English DISPOSAL OF THE EXHAUSTED BATTERY WARNING: Do not dispose of the exhausted battery. The battery must explode if it is incinerated. The product that you have purchased contains a re- chargeable battery. The battery is recyclable. At the end of it’s useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. SAVE T
Summary of the content on the page No. 10
English FUNCTIONAL DESCRIPTION NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own power tool MODEL FDS9DVA: with charger (UC9SD) and case FDS12DVA: with charger (UC12SD) and case NAME OF PARTS 1. Cordless Driver Drill (FDS9DVA and FDS12DVA) Keyless Chuck Shift Knob Housing Bit Cap Push Nameplate
Summary of the content on the page No. 11
English 2. Battery Charger (UC9SD and UC12SD) Air vent Battery Installation Hole Cord Pilot Lamp Plug Caution Name Fig. 2 Plate Plate SPECIFICATIONS 1. Cordless Driver Drill Model FDS9DVA FDS12DVA Motor DC motor Low 0–280/min 0–350/min No-load speed High 0–840/min 0–1050/min Capacity Drilling Wood (Thickness 23/32"(18mm) 13/16"(21mm) 11/16" (18mm)) (Soft Wood) (Soft Wood) 3/8" (10mm) 15/32" (12mm) (Mild Steel) (Mild Steel) Metal (Thickness 1/16"(1.6mm)) 15/32" (12mm) 19/32" (15mm) (Aluminum) (Al
Summary of the content on the page No. 12
English ASSEMBLY AND OPERATION APPLICATIONS Use as a drill Drilling of soft steel, wood, plastic and aluminum materials. Use as a screwdriver Tightening and loosening of machine screws, wood screws and tapping screws. REMOVAL AND INSTALLATION METHOD OF BATTERY How to install the battery. Align the battery with the groove in tool Handle handle and slip it into place. Always insert it all the way until it locks in place with a little click, If not, it may acciden- Latch tally fall out of t
Summary of the content on the page No. 13
English 3. Charging When the plug of battery charger has been inserted into the receptacle, charging will commence and the pilot lamp will light on. NOTE: If the pilot lamp dose not light, pull out the plug from the receptacle and check if the battery is properly mounted. In approx. one hour, when the battery is fully charged, the pilot lamp will go out. NOTE: The battery charging time becomes longer when a temperature is low or the voltage of the power source is too low. When the pilot lamp
Summary of the content on the page No. 14
English (2) Avoid recharging at high temperatures. A rechargeable battery will be hot immediately after use. If such a battery is recharged immediately after use, its internal chemical substance will deteriorate, and the battery life will be shortened. Leave the battery and recharge it after it has cooled for a while. BEFORE USE Check the work area to make sure that it is clear of debris and clutter. Clear the area of unnecessary personnel. Ensure that lighting and ventilation is adequate. OPERA
Summary of the content on the page No. 15
English 3. Check the rotational direction The bit rotates clockwise (viewed from the rear side) by Triger pushing the R-side of the selector button. switch The L-side of the selector button is pushed to turn the bit counterclockwise. (See Fig. 6). (The L and R marks are marks marks R L provided on the body.) When the trigger switch is depressed, the tool rotates. When the trigger is released, the tool stops. R L The rotational speed of the drill can be controlled by varying the amount that
Summary of the content on the page No. 16
English 5. Confirm the cap position (see Fig. 9) The tightening torque of this unit can be adjusted accord- Triangle mark Cap ing to the cap position, at which the cap is set. mark Weak (1) When using this unit as a screwdriver, line up the one of the numbers “1, 3, 5 ... 22” on the cap, or the black dot, with the triangle mark on the outer body. Strong (2) When using this unit as a drill, line up the cap drill mark “ ” with the triangle mark on the outer body. Fig. 9 CAUTION: The cap cannot
Summary of the content on the page No. 17
English THE SCOPE AND SUGGESTIONS FOR USES Table 3 Work Cap position Suggestions Wood Drilling Steel Use for drilling purpose. Aluminum Machine Use the bit and socket matching the screw 1 – 22 screw diameter. Screw tightening Wood 1 – Use after drilling a pilot hole. screw HOW TO SELECT TIGHTENING TORQUE Table 4 Cap Tightening torque Operation example position Approximately 9 in-lbs. (10 kg-cm) 1 Machine screw Approximately 15 in-lbs. (17 kg-cm) 3 tightening Screw tightening for Approximately 23
Summary of the content on the page No. 18
English MAINTENANCE AND INSPECTION CAUTION: Pull out battery before doing any inspection or maintenance. 1. Checking the condition of the bit. The bits should be checked regularly. If worn or broken bits can slip or decrease the efficiency of the motor and burn it out. Replace worn bits with new ones. CAUTION: If you use a driver bit of which point is worn or broken, it will be dangerous since it slips. So replace it with a new one. 2. Check the Mounting Screws Loose mounting screws are dangerou
Summary of the content on the page No. 19
English ACCESSORIES WARNING: Accessories for this power tool are mentioned in this Instruction Manual. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. NOTE: Accessories are subject to change without any obligation on the part of the HITACHI. STANDARD ACCESSORIES 1 2 3 4 FDS9DVA 1 Phillips bit (No. 2 × 55L)(Code No. 318236) ....... 1 2 Battery (FEB9S) .................................................... 2 3 Battery Charger (UC9SD) .......
Summary of the content on the page No. 20
English OPTIONAL ACCESSORIES.....sold separately 1. Battery (FEB9S)(For FDS9DVA) 2. Battery (FEB12S)(For FDS12DVA) NOTE Specifications are subject to change without any obligaiton on the part of the HITACHI. 20
