Summary of the content on the page No. 1
Register your product and get support at
AJB1002
EN User manual
Summary of the content on the page No. 2
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, par
Summary of the content on the page No. 3
m Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install the battery correctly. • Remove the battery when the unit is not used for a long time. n Apparatus shall not be exposed to dripping or splashing. o Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Notice This product complies with the radio interference requirements of the European Community. A n y c h
Summary of the content on the page No. 4
normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be re
Summary of the content on the page No. 5
• Quick start guide Overview of the main unit nn a c m b l k c j d i h g f e
Summary of the content on the page No. 6
a + TUNING - • Tune to radio stations. b REPEAT ALARM/BRIGHTNESS CONTROL • Repeat alarm. • Adjust display brightness. c AL 1/AL 2 • Set alarm. • Activate/deactivate alarm timer. d /SOURCE • Turn on/off the unit. • Select a source: FM/DAB tuner or MP3 link. e - Volume + • Adjust volume. f Battery compartment g FM ANT • Improve FM reception. h DC 5V • Connect power. i MP3-LINK • Connect external audio device. j SLEEP • Set sleep timer. k SET TIME/PROG/MENU • Set clock. • Program radi
Summary of the content on the page No. 7
• Show current status. • Switch between mono and stereo broadcast. • C o n fi r m a s e l e c t i o n . n Display panel 3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rea
Summary of the content on the page No. 8
Caution • R i s k o f e x p l o s i o n ! K e e p b a t t e r i e s a w a y f r o m h e a t , s u n s h i n e o r fi r e . N e v e r d i s c a r d b a t t e r i e s i n fi r e . • R isk of product damage! When the apparatus is not used for long periods, remove the battery. • T he battery contains chemical substances, so it should be disposed of properly. • The battery can not be used as power supply of this unit. F or fi rst -time use: 1 Remove the protective tab to activate the
Summary of the content on the page No. 9
Connect power Caution • Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or the underside of the apparatus. • Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. • Before connecting the AC power cord, ensure that you have completed all other connections. 1 Connect the power adapter to • the DC 5V socket on the back of the main unit. • the power socket.
Summary of the content on the page No. 10
Turn on 1 Press to turn on the unit. 2 Press repeatedly to switch between standby mode and different sources (FM/DAB/ MP3-LINK). » The time and date (if set) are displayed. To switch the unit to standby mode: 1 Press for 3 seconds. Set clock 1 In standby mode, press SET TIME for over 3 seconds. » [SYNC ON Y] is displayed. 2 Press PRESET +/RRESET - to select [Y] (Yes) or [N] (No). • If [Y] is selected, the clock of the unit synchronizes with that of DAB station. 3 Press SET TIME t o c o n
Summary of the content on the page No. 11
4 Listen to DAB radio Tune to DAB radio station Digital Audio Broadcasting (DAB) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, more information and better sound quality. 1 Press SOURCE repeatedly to select DAB. » The radio begins to scan DAB radio stations automatically. When scan is complete , the unit tunes to the fir st a vailab le station. » If no DAB station is found, [No DAB Station]appears, then [Manual tune] is displa
Summary of the content on the page No. 12
1 In DAB mode, press MENU until [Manual tune] is displayed, then press ENTER t o c o n fi r m . » A channel and its frequency appear on the display. 2 Press + TUNING - repeatedly to tune to your desired station. 3 Press ENTER t o c o n fi r m . [DRC value] • [DRC off]: DRC (Dynamic Range Control) is switched off. • [DRC high]: DRC is switched on (the default option recommended for noisy environment). • [DRC low]: DRC is set to half normal level. Store DAB radio stations in memory You can s
Summary of the content on the page No. 13
Show DAB information 1 While listening to DAB radio, press DISPLAY repeatedly to scroll through the following information (if available): » Dynamic label segment (DLS) » Program type (PTY) » Ensemble Name » Channel and frequency » Signal error rate » Bit rate and audio status » Time/date 5 Listen to FM radio Tune to FM radio station Note • For optimal reception, fully extend and adjust the position of the antenna. 1 Press SOURCE repeatedly to select FM tuner. » [FM] and current radio frequency
Summary of the content on the page No. 14
Store FM radio stations automatically Note • You can store a maximum of 20 preset radio stations. 1 Press SOURCE repeatedly to select FM tuner. 2 Press PROG for over 3 seconds. » All available stations are stored in the order of waveband reception strength. » The fir st stored r adio station broadcasts automaticall y . Store FM radio stations in memory 1 Tune to an FM radio station. 2 Press PROG. » The preset channel number is displayed. 3 Press PRESET +/PRESET - repeatedly to select a preset
Summary of the content on the page No. 15
Select a preset FM radio station 1 In FM tuner mode, press PRESET +/RRESET - to select a preset number. Select stereo/mono broadcast Note • For stations with weak signals, to improve the reception, change to monaural sound. 1 In FM tuner mode, press and hold ENTER to switch between mono and stereo broadcast. 6 Other features Set alarm Warning • Ensure that you have set the clock correctly. 1 Press AL 1 or AL 2 for over 2 seconds. 2 Press PRESET +/PRESET - to select your desired alarm source:
Summary of the content on the page No. 16
Note • If no button is pressed in one minute, the system exits alarm setting mode. Activate/Deactivate alarm timer Note • Ensure that you have already set the alarms successfully. 1 Press AL1 or AL2 repeatedly. » If the alarm timer is activated, or appears. » If the alarm timer is deactivated, or disappears. Snooze alarm 1 When the alarm sounds, press REPEAT ALARM/ BRIGHTNESS CONTROL. » The alarm sounds again 9 minutes later. » The alarm icon begins to blink. Note • If no button is pressed i
Summary of the content on the page No. 17
Set sleep timer The unit can switch to standby mode automatically after a period. 1 Press SLEEP repeatedly to select time period. » is displayed. » The volume decreases gradually in the last 5 minutes. To turn off the sleep timer: 1 Press SLEEP repeatedly until [Sleep off] is displayed. » disappears. Adjust display brightness 1 Press REPEAT ALARM/BRIGHTNESS CONTROL repeatedly to select different brightness levels of the display: • Full brightness • Half brightness • Backlight off Listen t
Summary of the content on the page No. 18
7 Product information Note • Product information is subject to change without prior notice. Specifications Tuner (FM) Tuning Range 87.5 - 108MHz Tuning grid 50KHz Sensitivity - Mono, 26dB S/N Ratio <22 dBf Search Selectivity >28dBf Total Harmonic Distortion <3% Signal to Noise Ratio >50dB
Summary of the content on the page No. 19
General information AC Power Input: 220 - 230 V, 50 Hz Operation Power Consumption 3.0 W Dimensions - Main Unit (W x H x D) 207 x 60 x 88 mm Weight - With Packing 0.53kg - Main Unit 0.4kg 8 Troubleshooting Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web si
Summary of the content on the page No. 20
• Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception • Increase the distance between the apparatus and your TV or VCR. • Fully extend the antenna. Timer does not work • Set the clock correctly. • Switch on the timer. Clock/timer setting erased • Replace the battery. • Power has been interrupted or the power plug has been disconnected. • Reset the clock/timer.
