Husqvarna SC18/968999352 user manual

User manual for the device Husqvarna SC18/968999352

Device: Husqvarna SC18/968999352
Category: Brush Cutter
Manufacturer: Husqvarna
Size: 0.11 MB
Added : 7/9/2014
Number of pages: 14
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Husqvarna SC18/968999352. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Husqvarna SC18/968999352.

For your convenience

If looking through the Husqvarna SC18/968999352 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Husqvarna SC18/968999352 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Husqvarna SC18/968999352 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Husqvarna SC18/968999352 User manual - Online PDF
Advertisement
« Page 1 of 14 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Husqvarna SC18/968999352 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Husqvarna SC18/968999352. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Operators manual
Models:
Please read these instructions carefully and make
SC18/968981201
sure you understand them before using the machine.
SC18/968999352
MANUAL NO. 540200156 REV. 01 (12/01/05)

Summary of the content on the page No. 2

CONTENTS Index Operator’s Guide Page Specifications .............................................................................................. 2 Features and Controls ................................................................................. 3 General Operating Instructions .................................................................... 4 Warnings ..................................................................................................... 4 Operating Instructions Page Op

Summary of the content on the page No. 3

FEATURES AND CONTROLS Oil used in the engine (gray cap) 1. Refer to your engine manual for oil type, viscosity, weight and capacity. Oil used in the Clutch/Gear Box 1. Refer to your engine manual for oil type, viscosity, weight and capacity. Reducer (yellow cap) Transmission grease used 1. You should not need to service the transmission. Call Tecumseh or your servicing dealer if needed. 2. Transmission is located directly behind the front axle underneath the engine. 3. There is

Summary of the content on the page No. 4

OPERATING INSTRUCTIONS GENERAL INFORMATION This manual will assist you in the safe operation and proper maintenance of your Husqvarna equip- ment. Read it thoroughly before attempting to operate the machine. Do not hesitate to call your dealer or Husqvarna if additional information is required. The following safety symbols are used throughout the manual to alert you to information about unsafe actions or situations: DANGER: indicates immediate hazards that may result in severe injury or death. W

Summary of the content on the page No. 5

OPERATING INSTRUCTIONS • Do not attempt sharp turns while cutting. • Should I water before cutting? It is usually not necessary to water before cutting. In extreme conditions, such as clay soil that is very compacted, a simple test as follows will determine if you need to water before cutting. Use a garden hand spade, weed tool, or even a large screwdriver to test the ground’s hardness. You should be able to push the tool into the ground 2 to 3 inches with little effort. If you are unable to do

Summary of the content on the page No. 6

SAFTEY AND MAINTENANCE CAUTION Any modifications or additions to this equipment without written authorization from the manufacturer will void all manufacturer’s warranties. Do not operate this machine without first reading owners manual. CAUTION Husqvarna parts have been designed and specified to meet commercial operating standards for strength and durability. For reliability and preservation of design safety standards, replacements should only be made with genuine Husqvarna parts or material of

Summary of the content on the page No. 7

SERVICE AND MAINTENANCE BLADE WEAR Sod cutter blades may wear quickly depending on soil condition. Replace blade when worn to 1 1/2” (3.8cm) or less. Maintain lower blade surface. CLEANING AND WASHING Regular cleaning and washing will prolong the service of your machine. Note: Use care with power washers to avoid damage to Warning Decals, Operator Instruction Labels, Bearings, Chain and Engine. Avoid direct spray on these items. DO NOT EXCEED 1000 PSI WATER PRESSURE FOR CLEANING. ADJUSTING CHAIN

Summary of the content on the page No. 8

TROUBLESHOOTING PROBLEM ANSWER/COMMENT Transmission shaft broke 1. Ensure debris is not caught in the Transmission Chain or wrapped around the transmission output shaft. 2. Ensure the unit has a Skid Pan installed. 3. Contact your servicing dealer. Drive wheels won’t engage 1. Ensure the Drive Chain is on all sprockets. 2. Ensure the Transmission Chain is on all sprockets. 3. Ensure the Chain Idler Spring is attached. 4. Check for side play in the Transmission Output Drive Sprocket (If there is

Summary of the content on the page No. 9

TROUBLESHOOTING PROBLEM ANSWER/COMMENT Chain (Drive) is coming off, The Transmission Output Sprocket is a fixed (non adjustable) drive sprocket wearing sprocket which is splined and snap-ringed in place. 1. Align the Axle Sprockets (double set screws) to the Transmission Output Sprocket. Position the Axle Sprockets the same distance from the chassis wall. 2. Replace the Tensioner Sprocket if it has a bent or twisted bracket or bent teeth. 3. Check chain tension between Axle Sprockets (1/4” - 3

Summary of the content on the page No. 10

TROUBLESHOOTING PROBLEM ANSWER/COMMENT Blade not disengaging New Unit or New Belt: 1. Run the machine with the blade engaged until the belt stretches. Used Unit or Old Belt: 1. Adjust the Belt Keeper so each leg touches when idler pulley is not engaged and so idler pulley clears Belt Keeper when engaged. 2. Be sure the correct Husqvarna belt is being used. If not, replace with a Husqvarna belt. 3. Belt Idler Pivot Bolt may be too tight or need lubrication. 4. Belt Idler Return Spring may be brok

Summary of the content on the page No. 11

TROUBLESHOOTING PROBLEM ANSWER/COMMENT Belt glazed or slipping 10. Be sure the Belt Idler Assembly is adjusted correctly. See Technical Bulletin “Inspection Procedure for Belt Tension.” 11. Important: Engine must be off before checking clearance of pulleys. Adjust tap bolt for 1/8” to 1/4” clearance between all pulleys, Belt Idler Pulley, Engine Pulley, Right Angle Drive Pulley with belt removed. Lock adjustment with jam nut. Depth Control Rod broke 1. Contact Action Center to order Depth

Summary of the content on the page No. 12

SOUND AND VIBRATION STATMENT 12

Summary of the content on the page No. 13

This page left black intentionally 13

Summary of the content on the page No. 14

Technical assistance: For technical assistance please contact your Local Dealer.


Alternative user manuals
# User manual Category Download
1 Husqvarna 143R-II User manual Brush Cutter 1222
2 Husqvarna 152RB User manual Brush Cutter 27
3 Husqvarna 232R, 235R, 235FR User manual Brush Cutter 497
4 Husqvarna 128R User manual Brush Cutter 773
5 Husqvarna 132R, 133R, 142R, 143R User manual Brush Cutter 551
6 Husqvarna 268K, 272K User manual Brush Cutter 86
7 Husqvarna 136, 141 User manual Brush Cutter 68
8 Husqvarna 249953 User manual Brush Cutter 2
9 Husqvarna 324RX-Series User manual Brush Cutter 7
10 Husqvarna 323R, 325RX-Series, 325RDX-Series User manual Brush Cutter 139
11 Husqvarna 235F User manual Brush Cutter 3
12 Husqvarna 324RX User manual Brush Cutter 19
13 Husqvarna 326C, 326L, 326LS, 326LX-Series, 326LDX-Series User manual Brush Cutter 14
14 Husqvarna 323RJ, 325RJX-Series User manual Brush Cutter 7
15 Husqvarna 326RJX-Series User manual Brush Cutter 1
16 Alamo SR14 User manual Brush Cutter 1
17 Alamo SR20 User manual Brush Cutter 2
18 Alamo GR60 User manual Brush Cutter 2
19 Alamo GR72 User manual Brush Cutter 1
20 Alamo TW84 User manual Brush Cutter 2